• 한국지반환경공학회 논문집
• /
• 제12권7호
• /
• pp.49-56
• /
• 2011

현재 지반주입공법에 사용되는 약액으로는 물유리계가 주로 사용되고 있다. 그러나 물유리계를 사용한 약액주입공법은 현장적용에 있어서 내구성 저하, 강도 저하, 용탈 현상 등의 여러 가지 문제점을 가지는 바, 한시적인 차수용도로 사용될 수는 있으나 영구적인 지반보강 및 차수를 위해서는 본질적인 문제점을 가지고 있다. 본연구에서는 이러한 물유리계 지반주입재의 문제점을 해결할 수 있는 무기질계 지반주입재(NDS)의 환경영향평가 및 내구성을 규명하기 위하여 대표적인 물유리계 재료인 SGR 재료와 함께 일축압축강도시험, 어독성시험, 내구성시험, 침적 후 삼축투수시험을 실시하였다. 내구성시험 결과, 재령 28일 강도는 NDS가 SGR보다 1.5배 크게 나타났으며, 어독성시험 결과 SGR의 생존율은 50~70%, NDS는 100%로 나타났고 이는 NDS의 생존율이 SGR보다 더 높다는 것을 보여주었다. 따라서 시험결과를 종합해 볼 때 전반적으로 NDS가 SGR에 비해 내구성면에서 우수하며 친환경적임을 확인할 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.221-226
• /
• 2001

Chloride diffusion effect of cement paste, freezing and thawing test, carbonation of concrete specimen were carried out using inorganic coating material. According to the chloride ions diffusion test, it is elucidated that permeability and diffusion coefficient of Cl￣ ions and apparent coefficient of coated cement paste is smaller than plain cement paste. A durability of coated concrete specimen was enhanced by the experiment result of concrete carbonation and freezing thawing test.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.57-60
• /
• 2006

The purpose of this study is to assess performance of prepacked DFRCC material compared with the DFRCC material which is made by using general mixing method. From 4r-point bending test, bond strength test and chlorine ion penetration test, flexural stress, -deflection relations, bond strengths, and durability assessment have been obtained. From the experiments, premixed DFRCC shows relatively good performance.

• 콘크리트학회논문집
• /
• 제20권6호
• /
• pp.773-784
• /
• 2008

동의 제련과정에서 생성되는 동슬래그의 건설용 골재 활용이 국내에서도 2004년부터 가능하게 되었으나, 현재까지 장기적인 안정성 즉, 내구성에 대한 충분한 판단자료가 미흡하여 실용화를 저해하는 한 요인으로 작용하고 있다. 본 연구에서는 동슬래그를 천연모래 (잔골재)의 부분 치환재로 사용한 콘크리트의 내구적 특성을 18 MPa 및 27 MPa급 상용 콘크리트에 대해 촉진 및 폭로 실험을 수행하여 규명하고, 이를 통해 동슬래그 콘크리트의 실용화를 가속시키기 위한 토대를 마련하고자 하였다. 실험결과, 동슬래그 30% 치환조건에서는 대부분의 천연모래를 사용한 배합과의 내구특성 차이가 크지 않은 것으로 나타났으며, 부순모래를 사용한 경우는 대체로 50% 치환조건과 유사한 것으로 확인되었다. 특히 8년간 진행된 폭로실험 결과에서도 천연모래만을 사용한 경우와 대비하여 동등한 정도의 내구성을 확보함은 물론, 저품위인 18 MPa 콘크리트의 경우에도 피복두께 20 mm까지 중성화에 도달하는 수명을 50년 이상 확보할 수 있음을 알 수 있었다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권3호
• /
• pp.169-175
• /
• 2014

In this paper, the evaluating test methods of the fire and the electric shock on the Electric pad using the house is proposed. We analyzed electric pad using magnetic shielded type hot wire because electric pad using the magnetic shielded type hot wire generally be used in the home. We analyzed FMEA in order to analyze the mechanism of the fire and the electric shock of the electric pad and designed testing methods (Durability tests on the environment, Mechanical durability tests, Electrical durability tests) obtained through the two-step QFD and tested. We verified the evaluating test methods of the fire and the electric shock on the Electric pad using the house through the analysis of the test results.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.467-470
• /
• 2005

This study reports the properties of high early strength & durability of concrete using PC admixture. To apply these data to construction site, we did the lab tests. The target of this study is to accomplish early strength of concrete(5.0 MPa/18 hr), and we did the durability tests such as length change test, chloride ion penetration test, adiabatic test, etc. PC type was more excellent than PNS type admixture. According to these tests, we concluded that we can apply this type of PC admixture to the civil & construction site, and we can reduce the term of works and finally we can accomplish the economical construction.

• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.82-87
• /
• 2012

The outer tie rod that is a part of steering system connects the steering gear to the steering knuckle via the inner tie rod. The formal study suggested the optimized structural design of an outer tie rod installed in a passenger car. Its weight is 284.7g, which is 57.2% lighter weight than initial steel model. This study validates the optimized design of the outer tie rod considering buckling and durability. The assembled unit of an inner tie rod and outer tie rod is utilized to perform the test of the bending strength of the outer tie rod. On the contrary, 1/2 car is utilized to perform the test of its durability performance.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.71-74
• /
• 2007

We have concentrated on the performance improvement of each part for durability, safety and cost of high pressure storage system for fuel cell vehicle so far. But for the mass production of fuel cell vehicle, it is necessary to evaluate durability and safety in system module. We built the standard to evaluate vibration and collision safety of high pressure storage system for fuel cell vehicle, and could verify reliability of high pressure storage system.

• 한국군사과학기술학회지
• /
• 제12권5호
• /
• pp.676-682
• /
• 2009

The idler wheel installed at the front side of the newly developed tracked vehicle didn't meet the durability requirement by showing the crack failure near the jointed region at the wheel during the field test. To find the crack developing mechanism we constructed finite element model for the idler wheel representing the behavior of interface between each suspension units, material properties from the material test data and actual loading conditions. This paper shows a result that maximum von Mises stress near the bolt hole on the outer rim is higher than inner idler coressponding to the actual test result and that result was reversed by adopting the reinforcement outside of the outer rim.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.265-268
• /
• 2005

This paper discusses a strategy and status for development and operation of durability mock-up test facilities for offshore structures. The strategy is examplified and facilitated using an offshore transmission tower crossing the West sea and the Shihwha lake, which was designed and constructed 345kV T/L lines transmitting power from Yeong-Heung fossil power plant to Seoul metropolitan area. Various data for corrosion protection, aging, life-prediction of concrete and steel offshore structures can be obtained using the proposed mock-up test facility. Acquired data will be used for further research on durability, life-prediction, and retrofit of structures. It is important to maintain the safety of 345 kV Yeong-Heung transmission line crossing the Shihwha lake because the offshore structure is one of the critical electric facilities transmitting large power to the metropolitan area. Operation of the offshore transmission tower mock-up is expected to make a significant contribution to stable power supply.