• 제목/요약/키워드: Dumbbell-type

검색결과 19건 처리시간 0.023초

광전회로 PCB에서 반사특성 개선을 위한 덤벨 형태의 CPW 전송선 설계 (Design of Dumbbell-type CPW Transmission Lines in Optoelectric Circuit PCBs for Improving Return Loss)

  • 이종혁;김회경;임영민;장승호;김창우
    • 한국통신학회논문지
    • /
    • 제35권4A호
    • /
    • pp.408-416
    • /
    • 2010
  • 플립 칩(Flip-Chip) 본딩을 적용하는 광 송신용 모듈에서 구동 IC(Driver IC)와 VCSEL(Vertical Cavity Surface Emitting Laser) 사이의 전송선에서 반사특성을 개선시키기 위한 덤벨 형태의 CPW 전송선 구조를 제안하였다. 제안된 구조는 반사특성을 개선시키기 위하여 기판 측면의 플립 칩 본딩 구조에 그라운드 더미 솔더 볼을 이용하여 CPW 전송선 구조를 유지하였고, 덤벨 형태의 CPW 전송선으로 설계하여 반사특성을 개선시켰다. 시뮬레이션 결과, 덤벨형태의 CPW 전송선의 반사 특성이 일반적인 CPW 전송선보다 13 dB 정도 우수한 것으로 나타났으며, CPW 전송선의 형태를 유지시키는 더미 그라운드 솔더 볼이 있을 때 4 dB 정도 반사특성이 개선되었다. 구동 IC 와 VCSEL의 임피던스 변화에 기인하는 전송선의 입출력 임피던스의 변화에 따른 반사특성의 변화율은 ${\pm}2.5\;dB$ 정도로 나타났다.

종격동에 빈발하는 신경종에 대한고찰 -18례 임상 경험- (Clinical Analysis of the Mediatinal Neurogenic Tumor -18 case report-)

  • 최영호
    • Journal of Chest Surgery
    • /
    • 제27권11호
    • /
    • pp.938-941
    • /
    • 1994
  • Neurogenic tumors of the mediastinum may have an intraspinal component connected by a narrowed segment of tumor in the intervertebral foramen, then have symptoms of back pain,lower extremity tingling sensation. CT scan or MRI demonstrated a Dumbbell-shaped mass density compressing spinal canal, enlargement of the foramen, erosion of bone, and intervertebral widening. We report the analysis of the 18 cases of neurogenic tumors on posterior mediastinum and Dumbbell type tumors are 3 cases among the 18 cases. The neurilemmomas were 12 cases[67%], the ganglioneuroma were 5 cases[28%], and neuroblastoma was one case[5%]. The successful removal was done in all cases, a standard thoracotomy and laminectomy was done in Dumbbell type tumors.There was no postoperative neurological complications.

  • PDF

Orientation and deformation of FENE dumbbells in confined microchannel and contraction flow geometry

  • Song, Sun-Jin;Kim, Ju-Min;Ahn, Kyung-Hyun;Lee, Seung-Jong;Yeo, Jong-Kee
    • Korea-Australia Rheology Journal
    • /
    • 제19권3호
    • /
    • pp.147-156
    • /
    • 2007
  • The orientation and deformation of polymer chains in a confined channel flow has been investigated. The polymer chain was modeled as a Finitely Extensible Nonlinear Elastic (FENE) dumbbell. The Brownian configuration field method was extended to take the interaction between the flow and local chain dynamics into account. Drag and Brownian forces were treated as anisotropic in order to reflect the influence of the wall in the confined flow. Both Poiseuille flow and 4 : 1 contraction flow were considered. Of particular interest was molecular tumbling of polymer chains near the wall. It was strongly influenced by anisotropic drag and high shear close to the wall. We discussed the mechanism of this particular behavior in terms of the governing forces. The dumbbell configuration was determined not only by the wall interaction but also by the flow type of the geometric origin. The effect of extensional flow on dumbbell configuration was also discussed by comparing with the Poiseuille flow.

빌딩블럭 방법을 이용한 비대칭 단조 공정에 관한 연구 (A Study on the Asymmetric Forging Process Using Building Block Method)

  • J.H.Lee
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제21권2호
    • /
    • pp.117-125
    • /
    • 1997
  • 상계요소 해석(UBET) 프로그램은 비대칭 단조공정에서의 다이 충만과정과 단조 하중등을 예측하기 위하여 개발되었다. 보다 용이하게 단조 공정을 해석하기 위하여 비대칭 형상의 단조공정을 평면변형부(길이 부분)과 축대칭변형부(라운딩 부분)으로 나누었다. 평면변형부와 축대칭 변형부의 경계는 전단에너지를 고려하여 결합하는 빌딩 블록 방법(building block method)을 이용하였다. 그리고 본 연구의 비대칭 형상을 단조하는데 최적의 초기시편 형상으로 아령형의 시편(dumbbell-typed billet)을 제시하였다. 또한 실험은 상온에서 플라스티신을 사용하여 수행되었고 수치해석 결과와 실험결과는 비교적 잘 일치하였다.상계요소 해석(UBET) 프로그램은 비대칭 단조공정에서의 다이 충만과정과 단조 하중등을 예측하기 위하여 개발되었다. 보다 용이하게 단조 공정을 해석하기 위하여 비대칭 형상의 단조공정을 평면변형부(길이 부분)과 축대칭변형부(라운딩 부분)으로 나누었다. 평면변형부와 축대칭 변형부의 경계는 전단에너지를 고려하여 결합하는 빌딩 블록 방법(building block method)을 이용하였다. 그리고 본 연구의 비대칭 형상을 단조하는데 최적의 초기시편 형상으로 아령형의 시편(dumbbell-typed billet)을 제시하였다. 또한 실험은 상온에서 플라스티신을 사용하여 수행되었고 수치해석 결과와 실험결과는 비교적 잘 일치하였다.

  • PDF

비축대칭 형상의 단조 공정 설계에 관한 연구 (A Study on the Process Design of Non-Axisymmetric Forging Components)

  • Kim, Y.H.;Bae, W.B.;Park, J.H.
    • 한국정밀공학회지
    • /
    • 제12권10호
    • /
    • pp.57-68
    • /
    • 1995
  • An upper bound elemental technique (UBET) program has been developed to predict forging load, die-cavity filling, preform in non-axisymmetric forging. To analyze the process easily, it is suggested that the deformation is divided into two different parts. Those are axisymmetric part in corner, plane-strain part in lateral. The plane-strain and axisymmetric parts are combined by building block method. And the total energy is computed through combination of three deformation parts. A dumbbell-type preform has been obtained from height and volumetric compensations of the billet based on the backward simulation. Experimetns have been carried out with pure plasticine at room temperature. Theoretical predictions are in good agreement with expereimental results.

  • PDF

내장형 실린더를 이용한 시멘트 고결토의 인장시험 방법에 관한 연구 (Study on the Direct Tensile Test for Cemented Soils Using a Built-In Cylinder)

  • 박성식;이준우
    • 대한토목학회논문집
    • /
    • 제34권5호
    • /
    • pp.1505-1516
    • /
    • 2014
  • 본 연구에서는 시멘트 고결토 내에 실린더를 내장시킨 다음 유압으로 공시체 내부에서 인장력을 가하여 공시체를 직접 파괴시키는 직접인장시험 방법에 대한 연구를 수행하였다. 또한 기존 아령모양의 공시체를 이용한 직접인장시험과 대표적인 간접인장시험인 쪼갬인장시험을 실시하여 인장시험 방법에 따른 차이를 비교하였다. 인장시험용 공시체는 모래/시멘트비를 3:1 또는 1:1로 제작한 다음 7일 및 28일 동안 대기중 양생하였으며, 동일한 경우에 대해 10개의 공시체를 실험하여 평균값을 비교하였다. 한편 일축압축시험도 실시하여 일축압축강도와 인장강도의 비를 분석하였다. 내장형 실린더를 이용한 직접인장시험으로부터 얻은 인장강도는 아령모양 공시체를 이용한 직접인장시험으로부터 얻은 값보다 다소 높은 인장강도를 보였지만, 아령모양 공시체를 이용한 시험방법은 공시체 제작이 불편하고 시험 중 변곡부에서 파괴되는 경우가 자주 발생하였다. 탄성파괴를 일으키는 콘크리트나 암석에 적용하는 쪼갬인장시험방법으로 부터 얻은 인장강도는 표준편차가 가장 컸을 뿐 아니라, 시멘트 고결토와 같이 강도가 상대적으로 약해 탄소성파괴를 일으키는 재료에는 적용하기 어려웠다.

Isotropic NMR Shifts in Some Pyridine-Type Ligands Complexed with Paramagnetic Undecatungstocobalto(Ⅱ)silicate and Undecatungstonickelo(Ⅱ) silicate Anions. Identifications of Dumbbell-Shaped 4,$4^{\prime}$-Bipyridyl Complexes

  • Moonhee Ko;Gyung Ihm Rhyu;Hyunsoo So
    • Bulletin of the Korean Chemical Society
    • /
    • 제14권4호
    • /
    • pp.500-506
    • /
    • 1993
  • $^1H$ and $^{13}C$ NMR spectra for pyridine, ${\beta}$-and ${\gamma}$-picoline, pyrazine, and 4,4'-bipyridyl complexed with paramagnetic undecatungstocobalto(II)silicate and undecatungstonickelo(II)silicate anions are reported. For these complexes the ligand exchange is slow on the NMR time scale and the pure resonance lines have been observed at room temperature. The isotropic shifts in nickel complexes can be interpreted in terms of contact shifts by ${\sigma}$-electron delocalization. Both contact and pseudocontact shifts contribute to the isotropic shifts in cobalt complexes. The contact shifts, which are obtained by subtracting the pseudocontact shifts from the isotropic shifts, require both ${\sigma}$-and ${\pi}$-electron delocalization from the cobalt ion. Slow ligand exchange has also allowed us to identify the species formed when bidentate ligands react with the heteropolyanions. Pyrazine forms a 1 : 1 complex, while 4,4'-bipyridyl forms both 1 : 1 and dumbbell-shaped 1 : 2 complexes.

식물에 따른 공변세포의 형태적 특징과 개념화 (Morphological Characteristics and Conceptualization of Guard Cells in Differernt Plants)

  • 이준상;박찬희
    • 한국환경과학회지
    • /
    • 제25권9호
    • /
    • pp.1289-1297
    • /
    • 2016
  • The walls of guard cells have many specialized features. Guard cells are present in the leaves of bryophytes, ferns, and almost all vascular plants. However, they exhibit considerable morphological diversities. There are two types of guard cells: the first type is found in a few monocots, such as palms and corn, and the other is found in most dicots, many monocots, mosses, ferns, and gymnosperms. In corns, guard cells have a characteristic dumbbell shape with bulbous ends. Most dicot and monocot species have kidney-shaped guard cells that have an elliptical contour with a pore at its center. Although subsidiary cells are common in species with kidney-shaped stomata, they are almost always absent in most of the other plants. In this study, there were many different stomatal features that were associated with kidney-shaped guard cells, but not dumbbell shaped guard cells, which are present in most grasses, such as cereals. Each plant investigated exhibited different characteristic features and most of these plants had kidney-shaped guard cells. However, the guard cells of Chamaesyce supina Mold, were often more rectangular than kidney-shaped. In contrast, Sedum sarmentosum guard cells were of the sink ensiform type and in Trifolium repens, the guard cells exhibited a more rhombic shape. Therefore, kidney-shaped guard cells could be divided into a number of subtypes that need to be investigated further.

식물에서 기공 형태에 대한 오해와 진실 (Misconceptions and Truths of Morphological Characteristics in Plant Stomata)

  • 김대재;이준상
    • 생명과학회지
    • /
    • 제27권2호
    • /
    • pp.241-246
    • /
    • 2017
  • 공변세포는 선태류, 양치류 그리고 모든 관다발식물의 잎에서 발견되며, 공변세포벽의 특징은 식물에 따라 매우 다양하고 특수하다. 식물에서 공변세포의 형태적 특징은 단자엽식물과 쌍자엽식물에서 관찰할 수 있는 두 종류로 분류되어 왔다. 일반적으로 단자엽식물은 아령형이고 쌍자엽식물은 콩팥형으로 알고 있다. 그러나 많은 단자엽식물의 공변세포는 콩팥형이다. 벼과에 속하는 옥수수와 벼 그리고 사초과의 공변세포는 아령형이다. 아령형의 공변세포를 보이는 식물은 부세포가 있다. 쌍자엽식물의 공변세포는 대부분 콩팥형이며 부세포가 없는 것이 특징이다. 기공은 공변세포와 부세포로 구성되어 있는 것으로 알고 있으나, 대부분의 쌍자엽식물은 부세포가 없다. 이제까지 단자엽식물은 공변세포 모양이 아령형이며 쌍자엽식물은 콩팥형으로 알고 있으나, 결론적으로 공변세포의 모양은 단자엽식물과 쌍자엽식물에 의해 분류되지 않으며 대부분의 벼과와 사초과를 제외하면 단자엽식물의 공변세포도 콩팥형이다. 돌나물은 공변세포가 가늘고 긴 입술형 그리고 자주달개비의 공변세포는 완벽하게 반달형이다. 따라서 콩팥형의 경우는 식물에 따라 그 모양이 모두 다르다고 할 수 있으며, 아령형의 경우는 그 공변세포의 형태가 비교적 일정하다.