• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.48-53
• /
• 2004

In this paper, the task-oriented optimal configuration in the sense of Velocity and Force manipulability measure of manipulator mounted on ROV is considered. Manipulability is a quantitative measure of manipulator's capability obtained under the limits of joint velocities or torques. The base arrangements and optimal joint configuration of manipulator, that maximize the manipulability measure under the constraints of given task, are investigated. With the two types of base arrangements of manipulator, workspace analysis is carried out to investigate merits and demerits of each arrangement on the view of manipulability measure. To find optimal joint configuration for a given task with each arrangement, the SQP(Sequential Quadratic Programming) optimization are performed. Weighted linear combination of velocity and force manipulability measure is object function for SQP optimization. The kinematic parameters of Dual Orion manipulator which will be mounted on KORDI ROV are used for simulation.

• Physical Therapy Rehabilitation Science
• /
• v.7 no.3
• /
• pp.109-113
• /
• 2018

Objective: The purpose of this study was to investigate the effects of fall experience and task complexity on gait performance in community-dwelling persons with chronic hemiparetic stroke. Design: Cross-sectional study. Methods: Thirty-three persons who had a history of stroke participated in this study. The participants included 18 persons (aged mean 54.0, mean score of 24.6 points on the Montreal Cognitive Assessment, MoCA) with fall experience (faller group) and 15 persons (aged mean 53.7, mean score of 24.7 points on the MoCA) without fall experience (non-faller group) in the previous six months. This study measured balance and gait performance at two different conditions (with/without 70% of water filled in a 200 cc cup). The participants were clinically assessed using the 10-meter walk test (10MWT), 6-minute walk test (6MWT), Berg Balance scale (BBS), Dynamic Gait Index (DGI), and Timed Up-and-Go (TUG) test. Results: After analyzation, persons in the faller group performed significantly better on the 10MWT, 6MWT, BBS, DGI, and the TUG test in the no-cup-carrying condition than those in the cup-carrying condition (p<0.05). The persons in the non-faller group also performed significantly better in all outcome measures with the no-cup-carrying condition than those in the cup-carrying condition (p<0.05). However, there was no interaction between fall experience and task complexity in the two groups. Conclusions: Our results showed that balance and gait performance depended on fall experience and task complexity but fall experience did not interact with task complexity. Clinicians should consider fall prevention and task complexity during therapeutic approaches in persons with hemiparetic stroke.

• Safety and Health at Work
• /
• v.10 no.3
• /
• pp.321-326
• /
• 2019

Background: Performing cognitive tasks and muscular fatigue have been shown to increase muscle activity of the lower extremity during quiet standing. A common intervention to reduce muscular fatigue is to provide a softer shoe-surface interface. However, little is known regarding how muscle activity is affected by softer shoe-surface interfaces during static standing. The purpose of this study was to assess lower extremity muscular activity during erect standing on three different standing surfaces, before and after an acute workload and during cognitive tasks. Methods: Surface electromyography was collected on ankle dorsiflexors and plantarflexors, and knee flexors and extensors of fifteen male participants. Dependent electromyography variables of mean, peak, root mean square, and cocontraction index were calculated and analyzed with a $2{\times}2{\times}3$ within-subject repeated measures analysis of variance. Results: Pre-workload muscle activity did not differ between surfaces and cognitive task conditions. However, greater muscle activity during post-workload balance assessment was found, specifically during the cognitive task. Cognitive task errors did not differ between surface and workload. Conclusions: The cognitive task after workload increased lower extremity muscular activity compared to quite standing, irrespective of the surface condition, suggesting an increased demand was placed on the postural control system as the result of both fatigue and cognitive task.

• Journal of the Korean Society of Physical Medicine
• /
• v.17 no.1
• /
• pp.85-92
• /
• 2022

PURPOSE: This study aimed to analyze the effects of task exercise on an unstable surface on the involuntary arm and leg movement and balance in stroke patients. METHODS: 20 stroke patients were clinically sampled and randomly assigned to two groups of 10 patients each. Experimental group I received task exercise intervention on an unstable surface and experimental group II received task exercise intervention. The interventions were carried out 3 times a week for 4 weeks (30 minutes per session). The global synkinesis (GS) and Berg Balance Scale (BBS) of the patients were evaluated as pre-tests prior to intervention, and then the post-tests were re-measured in the same manner as the pre-tests after a 4-week intervention period. RESULTS: In the experimental group I, there were statistically significant differences in the changes in the arm and leg GS (p < .01) and in the BBS (p < .05). On the other hand, in the experimental group II, there were statistically significant differences in the changes only in the arm GS (p < .01) and in the BBS (p < .05). Also, in the comparison of the changes between the two groups, there was a statistically significant difference in the changes in the leg GS only (p < .05). CONCLUSION: In the experimental group I, the arm and leg GS were statistically significantly reduced, but the balance ability was statistically significantly improved. The reason was that in the experimental group I, similar movements of the paralyzed arm were promoted due to the double-task exercise on the unstable surface, and sensory feedback and posture strategies were well utilized in the legs, which was found to be effective in reducing the GS and improving the balance ability. Therefore, based on these results, the double-task exercise on an unstable surface should be fully utilized for the rapid rehabilitation of stroke patients.

• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.154-161
• /
• 2009

Generation of pure and controllable excitation waves to excite the natural fast-growing instability waves has always been a difficult task. For this purpose, a device that is capable of supplying co- and counter-swirl was designed, fabricated, and applied. To incorporate a novel, robust mechanical excitation device that is capable of producing disturbances, mechanically and passively, a novel device was designed and built.

• Transactions on Control, Automation and Systems Engineering
• /
• v.1 no.1
• /
• pp.8-15
• /
• 1999

One of the main reason advocating redundant manipulators' superiority in application is that they can afford to optimize a dexterity measure, for example the manipulability measure. However, to obtain the gradient of the manipulability is not an easy task in case of general manipulator with high degrees of redundancy. This article proposes a method to compute the gradient of the manipulability, based on recursive algorithm to compute the Jacobian and its derivative using Denavit-Hartenberg parameters only. To characterize the null motion of redundant manipulators, the null space matrix using square minors of the Jacobian is also proposed. With these capabilities, the inverse kinematics of a redundant manipulator system can be done automatically. The result is easily extended to dual manipulator system using the relative kinematics.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.492-495
• /
• 1997

This paper aims to derive a mathematical model of the dynamics of handling task in field robot which stable grasping and manipulates a rigid object with some dexterity. Firstly, a set of differential equation describing dynamics of the manipulators and object together with geometric constraints of tight area-contacts on motion of the overall system is analyzed and a method of computer simulation for overall system of differential-algebraic equations is presented. Thirdly, simulation results are shown and the effects of geometric constraints of contact-area are discussed. Finally, it is shown that even in the simplest case of dual single D.O.F. manipulators there exists a sensory feedback from sensing data of he rotational angle of the object to command inputs to joint actuators and this feedback connection from sensing to action eventually realizes secure grasping of the object, provided that he object is of rectangular shape and motion is confined to a horizontal

• The Korean Journal of Applied Statistics
• /
• v.25 no.5
• /
• pp.847-857
• /
• 2012

This article is concerned with choice-based conjoint analysis versus rating-based and ranking-based conjoint analysis. Choice-based conjoint analysis has a definite advantage in that the respondent's task of choosing the most preferred profile from several competing profiles adequately mimics consumer marketplace behavior. It is crucial to design the choice sets appropriate for the choice-based conjoint. Thus, this article suggests a new method to design the choice sets that are well-balanced. It augments the balanced incomplete block design and then obtains the dual design of the result to accommodate various numbers of profiles. In consequence, the choice sets designed by the new method have the desirable characteristics that each profile is presented to the same number of respondents, and pairs of any two distinct profiles occur together in the same number of choice sets. The balancing of the design increases the efficiency of the conjoint analysis. In addition, the pair-comparison scheme can improve the quality of data through the identification of contradictory responses.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.4
• /
• pp.415-425
• /
• 2019

This study proposes a new approach to control Moving Stuff Action Through Iterative Learning robot with dual arm for smart factory. When robot moves object with dual arm, not only position of each hand but also contact force at surface of an object should be considered. However, it is not easy to determine every parameters for planning trajectory of the an object and grasping object concerning about variety compliant environment. On the other hand, human knows how to move an object gracefully by using eyes and feel of hands which means that robot could learn position and force from human demonstration so that robot can use learned task at variety case. This paper suggest a way how to learn dynamic equation which concern about both of position and path.

• Dementia and Neurocognitive Disorders
• /
• v.22 no.4
• /
• pp.139-147
• /
• 2023

Background and Purpose: Dual walking task such as crossing over an obstacle may serve as an excellent tool for predicting early cognitive decline. Thus, this study aimed to investigate correlation between walking while crossing over an obstacle and executive functions under different gait phases to validate the use of walking with an obstacle for predicting early cognitive decline. Methods: A cross-sectional study was conducted on 48 elderly individuals from 2 day-care centers and 3 welfare-centers in Seoul and Gyeonggi, Korea. Executive function tests (Trail Making Test, Stroop test) and dual walking tests (gait speed, cadence, stance time, gait cycle time) were performed and compared using partial correlation analysis. Results: There were significant correlations between executive function and most of the gait variables (stance time, cadence, and gait cycle time) (p<0.05) when crossing over an obstacle while walking. Especially, stance time exhibited significant correlations with most executive functions (p<0.05). Conclusions: When evaluating executive function during walking with an obstacle, post-obstacle-crossing phase and stance time need to be observed.