• Restorative Dentistry and Endodontics
• /
• 제31권5호
• /
• pp.352-358
• /
• 2006

본 연구는 코어용 이중 중합 레진의 중합도에 미치는 두께의 영향과 빛이 감소된 깊은 와동에서 자가 중합에 의한 영향을 조사하고자 하였다. Luxacore Dual과 Luxacore Self (DMG Inc, Hamburg, Germany) 두 종류의 코어용 레진 수복재를 지름 10 mm, 두께가 2, 4, 6, 8 mm 의 Teflon mold에 주입하고 자가중합 시키거나 혹은 $500 mW/cm^2$의 광도로 제조자의 지시에 따라 중합 후 $37^{\circ}C$ 증류수에 24시간동안 저장하였다. 각 시편의 윗면과 아랫면에서 Knoop's hardness를 측정하였다. 결과는 ANOVA로 통계 분석 하였고 Tukey's test로 사후 검정하였다. Luxacore Self와 Luxacore Dual을 자가중합 시킨 군의 중합도는 두께에 따른 영향을 받지 않았다. Luxacore dual을 광중합한 경우 중합은 2 mm, 4 mm와 6 (적층충전) mm군에서는 밑면의 효과적인 중합이 일어났으나 8 (적층충전) mm군, 6, 8 (단일충전) mm군은 밑면에서 불완전한 중합을 보였다 (p < 0.05). 따라서 이 실험 결과에 의하면 4 mm를 초과하는 경우 단일충전보다 적층충전이 더 좋은 것으로 나타났다.

• The Journal of Advanced Prosthodontics
• /
• 제5권2호
• /
• pp.133-139
• /
• 2013

PURPOSE. This study was to evaluate the effect of the solution temperature on the mechanical properties of dualcure resin cements. MATERIALS AND METHODS. For the study, five dual-cure resin cements were chosen and light cured. To evaluate the effect of temperature on the specimens, the light-cured specimens were immersed in deionized water at three different temperatures (4, 37 and $60^{\circ}C$) for 7 days. The control specimens were aged in a $37^{\circ}C$ dry and dark chamber for 24 hours. The mechanical properties of the light-cured specimens were evaluated using the Vickers hardness test, three-point bending test, and compression test, respectively. Both flexural and compressive properties were evaluated using a universal testing machine. The data were analyzed using a two way ANOVA with Tukey test to perform multiple comparisons (${\alpha}$=0.05). RESULTS. After immersion, the specimens showed significantly different microhardness, flexural, and compressive properties compared to the control case regardless of solution temperatures. Depending on the resin brand, the microhardness difference between the top and bottom surfaces ranged approximately 3.3-12.2%. Among the specimens, BisCem and Calibra showed the highest and lowest decrease of flexural strength, respectively. Also, Calibra and Multilink Automix showed the highest and lowest decrease of compressive strength, respectively compared to the control case. CONCLUSION. The examined dual-cure resin cements had compatible flexural and compressive properties with most methacrylate-based composite resins and the underlying dentin regardless of solution temperature. However, the effect of the solution temperature on the mechanical properties was not consistent and depended more on the resin brand.

• Restorative Dentistry and Endodontics
• /
• 제48권3호
• /
• pp.30.1-30.11
• /
• 2023

Objectives: This study verified the possibility of cementing fiberglass-reinforced posts using a flowable bulk-fill composite (BF), comparing its push-out bond strength and microhardness with these properties of 3 luting materials. Materials and Methods: Sixty endodontically treated bovine roots were used. Posts were cemented using conventional dual-cured cement (CC); self-adhesive cement (SA); dual-cured composite (RC); and BF. Push-out bond strength (n = 10) and microhardness (n = 5) tests were performed after 1 week and 4 months of storage. Two-way repeated measures analysis of variance (ANOVA), 1-way ANOVA, t-test, and Tukey post-hoc tests were applied for the push-out bond strength and microhardness results; and Pearson correlation test was applied to verify the correlation between push-out bond strength and microhardness results (α = 0.05). Results: BF presented higher push-out bond strength than CC and SA in the cervical third before aging (p < 0.01). No differences were found between push-out bond strength before and after aging for all the luting materials (p = 0.84). Regarding hardness, only SA presented higher values measured before than after aging (p < 0.01). RC and BF did not present 80% of the maximum hardness at the apical regions. A strong positive correlation was found between the luting materials' push-out bond strength and microhardness (p < 0.01, R² = 0.7912). Conclusions: The BF presented comparable or higher push-out bond strength and microhardness than the luting materials, which indicates that it could be used for cementing resin posts in situations where adequate light curing is possible.

• Restorative Dentistry and Endodontics
• /
• 제29권2호
• /
• pp.191-199
• /
• 2004

The purposes of this study were to estimate the material properties of the recently developed domestic composite resins for core filling material (Chemical, Dual A, Dual B；Vericom, Korea) and to compare them with other marketed foreign products (CorePaste, Den-Mat, USA；Ti-Core, Essential Dental Systems, USA；Support. SCI-Pharm. USA). Six assessments were made：working time. setting time. depth of polymerization. flexural strength. bonding strength. and marginal leakage. All items were compared to ISO standards. All domestic products satisfied the minimum requirements from ISO standards (working time：above 90 seconds. setting time：within 5 minutes). and showed significantly higher flexural strength than Core Paste. Dual A and B could. especially. reduce the setting time to 60 seconds when cured with $600mW/cm^2$ light intensity. All experimental materials showed 6 mm depth of polymerization. Bond strengths of Ti-Core and Dual B materials were significantly higher than the other materials. Furthermore. three domestic products and Ti-Core could reduce the microleakage effectively.

• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.33-54
• /
• 1995

The degree of conversion of composite resin was known to have influence on the mechanical properties of composite materials such as hardness, strength, wear resisitance, dimensional and color stability. Also unreacted monomer was reported to be harmful to the pulp. So the degree of conversion was a very important factor in the success of composite resin restorations. In recent, the dual cure resin cement was developed with the advocations that it could increase the curing rates in the sites where the curing ligt could not reach. Moreover many manufactors added some adhesive components in the resin cement. This study was undertaken to observe the effects of curing depth and light curing times on the degree of conversion of dual cure resin cements. CR INLAY CEMENT, DUAL CEMENT and OPTEC BOND, by the Fourier transform Infrared analysis, changing the curing depth 1mm, 2mm and 3mm, and varying the light curing time 20 seconds, 40 seconds and 80 seconds at each depth. The cytotoxicity of dual cure resin cements was tested by the in vitro MTT method using L929 cell. The results was evaluated and compared statistically. The results were obtained as follows : 1. The dual cure resin cements reavealed various degree of conversion, CR INLAY CEMENT and DUAL CEMENT had a tendency to be more reactive to the light cure and OPTEC BOND was a more chemical one. 2. CR INLAY CEMENT and DUAL CEMENT showed the lowest degree of conversion in 2 mm depth, and in 3mm depth the degree of conversion increased, which were due to the chemical cure of dual cures, but OPTEC BOND showed decreasing degree of conversion with increasing curing dept h and all experimental groups showed lower degree of conversion than CHEMICAL group which cured in dark room with no light, so the weak light-curing of dual cure resin cement prevented the chemical cure. (P<0.05) 3. CR INLAY CEMENT and DUAL CEMENT showed increasing degree of conversion in 1 mm and 3 mm, according to the increasing cure times, but in 2 mm depth the degree of conversion decreased with increasing light-curing times and OPTEC BOND showed contrary tendency, but there was no ststistical importance in the differences among the experimental group.(P>0.05) 4. The optical density by MTT assay of extractions of CR INLAY CEMENT, DUAL CEMENT and OPTEC BOND revealed no statitically important differences comparing with optical density of negative control.(P>0.05) 5. CR INLAY CEMENT showed a tendency of increaing cytotoxicity with days and DUAL CEMENT and OPTEC BOND showed higher cytotoxicity in 2 days than in 4 days, but there was no statistical importance in the differences.(P>0.05).

• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.191-205
• /
• 1992

The purpose of this study was to evaluate the microleakage of class II composite resin inlays and compare them with the conventional light-cured resin filling restorations. Class II cavities were prepared in 60 extracted human molars with which cervical margins were located below 1.0mm at the cemento-enamel junction using No. 701 tapered fissure carbide bur. All of the prepared cavities were restored as follows and divided into 6 groups. Group I and 2 were restored using direct filling technique and group 3,4,5 and 6 were restored using direct inlay technique that was cemented with dual-cured resin cements. group I: Cavities were restored with light-curing composite resin, Brilliant Lux. group 2. Cavities were restored with light-curing composite resin, Clearfil PhotoPosterior. group 3: Cavities were restored with Clearfil CR Inlay and heat treated at $125^{\circ}C$ for 7 minutes. group 4: Cavities were restored with same material as group 3 and heat treated at $100^{\circ}C$ for 15 minutes. group 5: Cavities were restored with Brilliant (Indirect esthetic system) and heat treated at $125^{\circ}C$ for 7 minutes. group 6: Cavities were restored with same material as group 5 and heat treated at $100^{\circ}C$ for 15 minutes. All specimens were polished with same method and thermocycled between $6^{\circ}C$ and $60^{\circ}C$, then immersed in a bath of 2.0% aqueous solution of basic fuchsin dye for 24 hours. Dyed specimens were sectioned longitudinally and dye penetration degree was read on a scale of 0 to 4 by Tani and Buonocore's method 45). The results were as follows: 1. Microleakage was observed rather at the cervical margins than at the occlusal margins in all groups. 2. Composite resin inlay groups showed significantly less leakage than direct filling groups at the cervical margins (p < 0.001). 3. In composite resin inlay groups, there was no significant difference in microleakage between specimens by heat treating temperature and time (p > 0.05). 4. There was no significant difference in leakage between each groups at the occlusal margins (p > 0.05).

• Restorative Dentistry and Endodontics
• /
• 제35권4호
• /
• pp.257-266
• /
• 2010

본 연구의 목적은 미성숙 우치를 가타퍼챠 및 다양한 포스트와 코아 시스템을 이용하여 수복한 후 술식에 따른 파절 강도를 측정하였다. 우치의 백악상아경계 상방 8 mm, 하방 12 mm 지점을 절단하여 제작한 미성숙 우치 모델에서 가타퍼챠와 이원중합형 복합레진 LuxaCore로 코어 수복을 시행하거나, 각각 D.T. LIGHT-POST, ParaPost XT 및 다양한 크기의 EverStick Post와 LuxaCore로 수복하였다. 이후 시편을 72시간 동안 증류수에 저장한 후 6,000회의 thermocycling을 진행하였다. 실험적으로 치주인대의 물성을 재현하고, Instron에 시편을 45도로 위치시켜 압축부하를 가해 파절 강도를 측정하고, 파절 부위를 분석하였다. 실험 결과, 포스트를 이용하여 수복하였을 때 파절 강도가 통계적으로 유의하게 증가하였고(p < 0.05), 포스트의 종류 및 적합도는 결과에 통계적으로 유의한 차이를 나타내지 않았다. 대부분의 시편에서 수복 가능한 파절이 나타났으며, 실험군에 따른 파절 부위의 유의한 차이는 나타나지 않았다. 이상의 결과로 볼 때 미성숙 치아의 상기 치근 강화 술식은 치아의 파절 강도를 증가시키고, 포스트의 종류 및 적합도는 파절 저항성에 거의 영향을 미치지 않는 것으로 나타났다.

• 대한소아치과학회지
• /
• 제26권3호
• /
• pp.554-563
• /
• 1999

심미적 수복재료인 복합 레진과 글래스 아이오노머 시멘트는 중합방식에 따라 화학중합형, 광중합형, 그리고 이 두 가지 중합방식을 겸비한 이중중합형으로 분류할 수 있다. 화학중합형과 광중합형에 대해서는 지금까지 다수의 보고가 있었으나, 충전용 복합 레진의 경우 이들과 이중중합형을 비교한 예는 아직 찾기 힘든 실정이었으므로, 이러한 관점에서의 연구가 필요할 것으로 사료되었다. 이 연구에서는 이중중합 수복재가 단일중합방식에 비해 어떠한 특성을 보이는지를 탐구하고자 하였다. 사용된 재료는 광중합형 복합 레진인 Veridonfil-Photo와 이중중합형인 Bis-core, 이중중합형의 글래스 아이오노머 시멘트인 Fuji II LC와 화학중합형인 Ketac-fil을 사용하였다. 가로 30mm, 세로 30mm, 높이 1mm와 3mm인 두 종류의 아크릴릭 몰드 중앙에 직경 7mm의 hole을 형성하여 여기에 4종의 수복재를 충전하였다. 충전 직후부터 시작하여 24시간 경과시까지 일정 시간의 간격으로 표면, 1mm, 3mm 깊이에서의 경도를 미세경도계(Shimadzu Micro Hardness Tester HMV-2000, Shimadzu Co. Japan)로 측정하였다. 측정치를 통계처리하여 얻은 결과는 다음과 같다. 1. 4 종의 수복재 모두에서, 중합직후에 비해 24시간 경과후의 미세경도가 증가되었다. 2. 중합 직후부터 24시간 경과시점까지의 미세경도를 측정한 결과, Ketac-fil을 제외한 나머지 수복재에서는 각 깊이간 경도의 차이가 있었다. 3. 각 수복제의 최종중합에 도달하는 시간을 조사한 결과, 이중중합형이 3min의 깊이에서 광중합형이나 화학중합형에 비해 중합이 더 오래 지속된 것으로 나타났다. 이상의 결과에서 조사광이 충분히 도달하지 못하여 중합이 현저히 떨어지는 수복재의 심부에도 이중중합방식을 사용할 경우에는 지속적인 중합반응이 일어나 중합도가 증가하는 것으로 나타났다.