• 전기학회논문지
• /
• 제58권11호
• /
• pp.2242-2246
• /
• 2009

In this paper, a homogeneous dual composite right/left-handed (D-CRLH) transmission line (TL) is proposed by using a defected ground structure (DGS) on the ground plane. In order to satisfy a homogeneity condition of metamaterial, a subwavelength unit cell is designed by way of a spiral DGS and a meander stub. From a dispersion diagram, it is expected that the frequency bands for the left-handed (LH) property is 3.5 - 4.4 GHz. At 3.8 GHz in the LH band, backward propagating phenomenon is observed from full-wave analysis. The experimental results show that the proposed TL has a stop-band in 1.75 - 3.6 GHz.

• Geomechanics and Engineering
• /
• 제16권3호
• /
• pp.321-329
• /
• 2018

Classic braced walls use struts and wales to minimize ground movements induced by deep excavation. However, the installation of struts and wales is a time-consuming process and confines the work space. To secure a work space around the retaining structure, an anchoring system works in conjunction with a braced wall. However, anchoring cannot perform well when the shear strength of soil is low. In such a case, innovative retaining systems are required in excavation. This study proposes an innovative earth-retaining wall that uses in situ soil confined in dual sheet piles as a structural component. A numerical study was conducted to evaluate the stability of the proposed structure in cohesionless dry soil and establish a design chart. The displacement and factor of safety of the structural member were monitored and evaluated. According to the results, an increase in the clearance distance increases the depth of safe excavation. For a conservative design to secure the stability of the earth-retaining structure in cohesionless dry soil, the clearance distance should exceed 2 m, and the embedded depth should exceed 40% of the wall height. The results suggest that the proposed method can be used for 14 m of excavation without any internal support structure. The design chart can be used for the preliminary design of an earth-retaining structure using in situ soil with dual steel sheet piles in cohesionless dry soil.

• 전자공학회논문지SC
• /
• 제37권2호
• /
• pp.69-76
• /
• 2000

dual-modulus 프리스케일러는 제어신호의 값에 따라 입력신호를 두 개의 모듈러스(modulus) 중에서 하나의 값으로 나누는 회로이다. 본 논문에서는 일반적인 ratioed-NAND구조가 아닌, ratioed-NOR구조를 가진 새로운 고속 dual-modulus 프리스케일러를 제안한다. 제안하는 회로는 NMOS를 직렬 연결하는 대신 병렬 연결함으로써 기존 회로보다 더 고속으로 작동한다. 현대 0.65(m 2-poly 2-metal CMOS 공정 파라미터를 사용한 HSPICE 모의 실험 결과, 25℃의 온도와 5V전원전압의 환경에서, 40.7㎽의 전력을 소모하고 최대 동작 주파수는 2.8㎓라는 것을 얻었다. 제안하는 dual-modulus 프리스케일러는 셀룰라 라디오의 입력단에서 주파수 합성을 하는 데에 이용될 수 있을 것이다.

• 한국전자파학회논문지
• /
• 제15권3호
• /
• pp.278-283
• /
• 2004

위성통신에서 있어서 주파수 할당 및 빔 커버리지가 다양해지고 복잡해짐에 따라 주파수상에서 인접하지 않은 여러 개의 채널 신호가 하나의 고출력 증폭기에 의해서 증폭되어져 안테나를 통하여 지상으로 송출되는 경우가 있다. 본 논문에서는, 이러한 위성통신 시스템에 적용이 가능한 두 개의 통과대역을 갖는 위성 중계기용 이중모드 정규(canonical) 구조 필터를 제시하였다. 필터의 무게와 부피를 줄이기 위하여 이중모드 설계기법을 사용하였으며, 최대한 많은 수의 전달영점 구현이 가능한 정규 구조로 필터를 설계하였다. 두 개의 통과대역을 갖는 Ka대역 위성 중계기용(30/20 ㎓) 6차 이중모드 정규 구조 필터의 구현을 통하여 설계기법을 검증하였다.

• Steel and Composite Structures
• /
• 제37권4호
• /
• pp.447-462
• /
• 2020

In this paper, a simplified seismic design method for low-rise dual frame-steel plate shear wall (SPSW) structures is proposed in the framework of performance-based seismic design. The dynamic response of a low-rise structure is mainly dominated by the first-mode and the structural system can be simplified to an equivalent single degree-of-freedom (SDOF) oscillator. The dual frame-SPSW structure was decomposed into a frame system and a SPSW system and they were simplified to an equivalent F-SDOF (SDOF for frame) oscillator and an equivalent S-SDOF (SDOF for SPSW) oscillator, respectively. The analytical models of F-SDOF and S-SDOF oscillators were constructed based on the OpenSees platform. The equivalent SDOF oscillator (D-SDOF, dual SDOF) for the frame-SPSW system was developed by combining the F-SDOF and S-SDOF oscillators in parallel. By employing the lateral force resistance coefficients and seismic demands of D-SDOF oscillator, the design approach of SPSW systems was developed. A 7-story frame-SPSW system was adopted to verify the feasibility and demonstrate the design process of the simplified method. The results also show the seismic demands derived by the equivalent dual SDOF oscillator have a good consistence with that by the frame-SPSW structure.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권4호
• /
• pp.1458-1470
• /
• 2018

In this letter, a new dual-port Multiple-Input Multiple-Output (MIMO) antenna is introduced which has two independent signal feeding ports in a single antenna element to achieve smaller antenna volumes for the 5G mobile applications. The dual-port structure is implemented by adding a cross coupled semi-loop (CCSL) antenna as the secondary radiator to the ground short of inverted-F antenna (IFA). It is found that the port to port isolation is not deteriorated when an IFA and CCSL is combined to form a dual-port structure. The isolation property of the proposed antenna is compared with a polarization diversity based dual-port antenna proposed in the literature [9]. The operating frequency range is 3.3-4.0 GHz which is suitable for places where $4{\times}4$ MIMO systems are supposed to be deployed such as in China, EU, Korea and Japan at the band ${\times}$ (3.3 - 3.8GHz. The measured 6-dB impedance bandwidths of the proposed antennas are larger than 700 MHz with isolation between the feeding ports higher than 18 dB [1-2]. The simulation and measurement results show that the proposed antenna concept is a very promising alternative for 5G mobile applications.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.61-66
• /
• 1992

In this paper, a method for implementing software for the control system with dual structure in processor module is proposed and implemented to enhance its reliability. In this implementation the multi-tasking function which is provided by a real-time operating system is applied. The overall softwre is divided into five tasks and is performed in each of the dual processor module, independently. By this, the processor module with dual structure can achieve a control objective and fault diagnostics effectively. An experimental result shows that the backup processor module can be substituted for the primary processor module immediately when it happens to fail, because data relating the failure information are exchanged continuously done via shared memories.

• 유공압시스템학회논문집
• /
• 제8권3호
• /
• pp.14-20
• /
• 2011

This study aims at aligning multiple wafers to reduce wafer handling time in wafer processes. We designed a multilevel structure for a prealigner which can handle multiple wafer simultaneously in a system. The system consists of gripping parts, kinematic parts, vacuum chucks, pneumatic units, hall sensors and a DSP controller. Aligning procedure has two steps: mechanical gripping and notch finding. In the first step, a wafer is aligned in XY directions using 4-point mechanical contact. The rotational error can be found by detecting a signal in a notch using hall sensors. A dual prealigner was designed for 300mm wafers and constructed for a performance test. The accuracy was monitored by checking the movement of a notch in a machine vision. The result shows that the dual prealigner has enough performance as commercial products.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권11호
• /
• pp.529-535
• /
• 2003

In this paper, we presents the characteristics of the new electrode structure in an AC Plasma Display Panel(PDP) that can generate dual mode discharges with a combination of short-gap and long-gap discharges. The experiment results show that the discharge voltage of the new electrode structure is mainly determined by short-gap discharge and the luminous efficiency is improved by 20% compared with the conventional electrode structure. The improvement of luminous efficiency is mainly caused by higher VUV generation and broader distribution from Ole ICCD camera measurements.

• 대한전자공학회논문지TC
• /
• 제44권2호
• /
• pp.76-80
• /
• 2007

본 논문에서는 이중 바이어스 조절과 PBG 구조를 이용하여 Doherty 증폭기의 효율과 선형성을 개선하였다. PBG 구조를 출력 정합회로에 구현하였으며, 이중 바이어스 조절을 Carrier Amplifier에 적용하여 낮은 입력레벨에서도 Doherty 증폭기의 효율을 개선 할 수 있었다. 제안된 구조를 이용한 Doherty 증폭기는 기존의 전력증폭기에 비해 PAE는 8 %, IMD3는 -5 dBc 개선하고, 모든 입력전력레벨에서 30 % 이상의 고효율을 가질 수 있었다.