• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.726-729
• /
• 2013

본 논문에서는 LCD source driver IC의 output buffer op-amp로 사용가능한 저소비전력 및 높은 슬루율을 갖는 CMOS rail-to rail 입/출력 op-amp를 설계하였다. 제안한 op-amp는 기존의 출력단 Class-AB 단에 새로이 설계한 Class-B control단을 추가하여 저소비전력과 높은 슬루율을 갖게 하였다. 시뮬레이션 결과 제안된 op-amp는 소비전력이 1.19mW로 감소하였으며 사용한 부하커패시터 (10nF)를 기준으로 슬루율은 6.5V/us로 확인되었다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.387-390
• /
• 2006

This paper presents a novel soft-switching PWM utility frequency AC to high frequency AC power conversion circuit Incorporating boost-half-bridge inverter topology, which is more suitable and acceptable for cost effective consumer induction heating applications. The operating principle and the operation modes are presented using the switching mode and the operating voltage and current waveforms. The performances of this high-frequency inverter using the latest IGBTs are illustrated, which includes high frequency power regulation and actual efficiency characteristics based on zero voltage soft switching (ZVS) operation ranges and the power dissipation as compared with those of the previously developed high-frequency inverter. In addition, a dual mode control scheme of this high frequency inverter based on asymmetrical pulse width modulation (PWM) and pulse density modulation (PDM) control scheme is discussed in this paper in order to extend the soft switching operation ranges and to improve the power conversion efficiency at the low power settings. The power converter practical effectiveness is substantially proved based on experimental results from practical design example.

• 보건행정학회지
• /
• 제7권2호
• /
• pp.65-88
• /
• 1997

In Korea, telemedicine is still under the beginning stage, but we expect that the developing 'Information Highway' will make this technology more common place and more easily used in coming soon. Currently, three hospitals are providing telemedicine services with their subsidiary hospitals which are far away from their remote place. However, the fee schedule of telemedicine services are not well-settled down, of course not reimbursed through current health insurance system. This study aims to develop new payment system for medical services provided through telemedicaine system. To design appropriate fee schedule for telemedicine services, we, first, review the current insurance payment system and telemedicine system both in domestic and foreign countries focusing on its payment system. A framework of telemedicine payment system is proposed in following steps based on information we acquired from this stage. Second. We decide the span of cost items which should be covered by telemedicine payment scheme. In hear, we suggest payment method for telemedicine services should be designed as dual structure which are telemedicine fee that should be reimbursed through payment scheme and any costs related to capital investment that should not be covered by payment system. Which is, payment system for telemedicine services should cover only service-related costs and any costs related to capital investment should be generated through third party such as government, health insurance association, etc. Finally, we suggest new fee schedules for telemedicine services. The key issues on developing telemedicine fee schedules are related with the determination of appropriate additional rate($\alpha$). The reasonable additional rate($\alpha$) must determine through careful evaluation of any additional efforts(e. g. : additional work hours which are related to providing telemedicine services). This study shows the process of how to determine appropriate additional rate($\alpha$).

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.917-924
• /
• 2019

This paper presents a wideband low noise amplifier (LNA) that is suitable for LTE-Advanced and 5G communication standards employing carrier aggregation (CA). The proposed LNA encompasses a common input stage and a dual output second stage with a buffer at each distinct output. This architecture is targeted to operate in both intra-band (contiguous and non-contiguous) and inter-band CA. In the proposed design, the input and second stages employ a gm enhancement with resistive feedback technique to achieve self-biasing, enhanced gain, wide bandwidth as well as reduced noise figure of the proposed LNA. An up/down power controller controls the single input single out (SISO) and single input multiple outputs (SIMO) modes of operation for inter-band and intra-band operations. The proposed LNA is designed with a 45nm CMOS technology. For SISO mode of operation, the LNA operates from 0.52GHz to 4.29GHz with a maximum power gain of 17.77dB, 2.88dB minimum noise figure and input (output) matching performance better than -10dB. For SIMO mode of operation, the proposed LNA operates from 0.52GHz to 4.44GHz with a maximum voltage gain of 18.30dB, a minimum noise figure of 2.82dB with equally good matching performance. An $IIP_3$ value of -6.7dBm is achieved in both SISO and SIMO operations. with a maximum current of 42mA consumed (LNA+buffer in SIMO operation) from a 1.2V supply.

• Journal of the Korean Wood Science and Technology
• /
• 제38권4호
• /
• pp.333-340
• /
• 2010

한반도 남부 일대에서 자생하는 황칠나무(Dendropanax morbifera Lev.) 수액으로부터 추출한 천연 도료인 황칠도료(Korean Dendropanax lacquer)는 예로부터 귀중한 예술품이나 투구, 화살, 활 등의 전쟁도구를 찬란한 황금색으로 도장하는데 사용되어 왔다. 경화 후 황금색의 투명한 도막을 형성하여 우수한 색상특성을 지니고 있을 뿐만 아니라 내후성, 내수성, 내식성 등이 우수하여, 보호도장으로써도 훌륭한 가치를 지니고 있다. 그러나 이러한 많은 장점에도 불구하고, 현대적인 여러 적용분야에 사용되지 못하고 있는 이유는 황칠도료의 생산량이 적고, 이로 인하여 가격이 매우 고가이고, 장시간의 경화시간이 소요되는 문제도 큰 원인으로 작용하고 있다. 한편 황칠 내에 광중합이 가능한 conjugated diene을 포함한 모노머가 있으며, 이러한 모노머는 일광 조사 조건등에 의하여 짧은 시간에 단단하고 황금색을 띠는 도막을 형성할 수 있음이 보고된 바가 있다. 따라서 본 연구에 서는 전통적인 황칠도료의 경화방법을 개선하고 경화속도를 촉진하기 위하여, 열개시제를 도입하여 열경화를 촉진하는 방법과 열개시제 및 광개시제를 동시에 도입하고 이중경화(dual curing)에 의해서 경화속도를 촉진하고자 하였다. 이러한 경화 속도 및 경화 거동은 적외선분광분석기(FT-IR)을 이용하여 -C=C- 이중결합 특성피크의 변화를 관찰하거나, 진자경도계(pendulum hardness tester)를 이용하여 표면 경도의 변화를 관찰함으로써 평가하였다. 또한 강체진자물성측정기(RPT)에 spot UV curing 장비를 도입하여 이중경화에 의한 경화 속도 진을 평가하였다. 본 연구의 결과 열개시제에 의하여 열경화가 촉진될 수 있을 뿐만 아니라, 이중경화에 의하여 경화속도를 향상시킬 수 있음을 확인하였다. 또한 이러한 황칠도료 경화 속도 촉진 방법을 활용하여 전통적인 역에만 사용되어온 황칠도료를 현대적인 여러 적용분야에도 확대하여 사용할 수 있는 가능성을 제시하였다.

• Journal of Microbiology
• /
• 제45권2호
• /
• pp.98-104
• /
• 2007

Chlorophyll ${\alpha}$ concentration and cyanobacterial cell density are regularly employed as dual criteria for determinations of the alert level for cyanobacterial bloom. However, chlorophyll ${\alpha}$ is not confined only to the cyanobacteria, but is found universally in eukaryotic algae. Furthermore, the determination of cyanobacterial cell counts is notoriously difficult, and is unduly dependent on individual variation and trained skill. A cyanobacteria-specific parameter other than the cell count or chlorophyll ${\alpha}$ concentration is, accordingly, required in order to improve the present cyanobacterial bloom alert system. Phycocyanin has been shown to exhibit a strong correlation with a variety of bloom-related factors. This may allow for the current alert system criteria to be replaced by a three-stage alert system based on phycocyanin concentrations of 0.1, 30, and $700\;{\mu}g/L$. This would also be advantageous in that it would become far more simple to conduct measurements without the need for expensive equipment, thereby enabling the monitoring of entire lakes more precisely and frequently. Thus, an alert system with superior predictive ability based on highthroughput phycocyanin measurements appears feasible.

• 대한한의학원전학회지
• /
• 제19권4호
• /
• pp.169-181
• /
• 2006

The Samyang-Sameum(三陽三陰) is the movement form peculiar to the cosmic dual forces. Since Byunggi(病氣) along with the Gyungkki(經氣), The Samyang-Sameum(三陽三陰) is the standard for a diagnosis of a disease's outbreak and change. Anyone of The Samyang-Sameum(三陽三陰) can cause a disease in a Gyungkki(經氣) because each and every human being has different Gyungkki(經氣). And, a disease may outbreak by anyone of Wind-Cold-Warmth-Heat(風寒溫熱). Guiding principles of the six Meridians(六經提綱) is set to diagnose which one of the Gyungkki(經氣) causes a disease. Sanghallon(傷寒論) shows several measures to diagnose the lapse of a disease at the beginning stage of external affection(外感) by Wind-Cold(風寒). It is most serious when the Jeongyung(傳經) symptom appears within 6 to 7 days after a disease outbreak since it indicates the exhaustion of true Eum(眞陰). It means the lapse of a disease that formation of dry stool(燥尸) by fast Jeonsok(轉屬) to Yangmyeong(陽明) after a Taeyang(太陽) is diseased. It also means that a position of disease is worsening by a sticking phase of disease when Yipeum(入陰) symptom after anyone of Samyang-Sameum(三陽三陰) is diseased.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.65-68
• /
• 2001

본 연구에서는 코움 드라이브에 비해 구동력은 크고 평행 판 구동 방식에 비해서는 선형 특성이 우수하며 안정된 구동거리가 증가하는 특성을 갖는 새로운 정전력(electrostatic force) 구동 방식을 제안한다. 운동 전극과 고정 전극을 기울어지게 배치하여 전극 면에 평행한 정전력 $F_x$와 전극 면에 수직인 정전력 $F_y$의 합력 $F_e$ 방향으로 전극을 운동시킴으로써 정전력의 방향과 전극의 운동 방향을 일치시킨다. 제안된 구동방식의 정전력 모델을 이용한 해석 결과 코움 드라이브에 비해서는 구동력이 50 % 이상 크며 평행 판 구동에 비해서는 안정된 구동 거리가 10 - 30 % 이상 증가하는 구동 특성을 얻을 수 있었다. 제안된 구동방식을 이용하여 HDD의 트랙 방향 저장 밀도를 증가시키기 위한 듀얼스테이지 서보(dual-stage servo)에 사용 될 마이크로 액츄에이터 (microactuator)를 설계하고 SoG(Silicon on Glass) 공정을 이용하여 제작하였다.

• Geomechanics and Engineering
• /
• 제21권5호
• /
• pp.489-501
• /
• 2020

This paper conducts a complicated coupled effective stress analysis of X-section-in-place concrete (XCC) pile installation and consolidation processes using the dual-stage Eulerian-Lagrangian (DSEL) technique incorporating the modified Cam-clay model. The numerical model is verified by centrifuge data and field test results. The main objective of this study is to investigate the shape effect of XCC pile cross-section on radial total stress, excess pore pressure and time-dependent strength. The discrepancies of the penetration mechanism and set-up effects on pile shaft resistance between the XCC pile and circular pile are discussed. Particular attention is placed on the time-dependent strength around the XCC pile shaft. The results show that soil strength improved more significantly close to the flat side compared with the concave side. Additionally, the computed ultimate shaft resistance of XCC pile incorporating set-up effects is 1.45 times that of the circular pile. The present findings are likely helpful in facilitating the incorporation of set-up effects into XCC pile design practices.

• 융복합기술연구소 논문집
• /
• 제1권2호
• /
• pp.6-15
• /
• 2011

This paper reports the design and fabrication of a micro-electro-mechanical-system(MEMS)-based electrostatic angular microactuator for a dual-stage servo. The proposed actuator employs a novel electrode pattern named "skewed electrode array(SEA)" scheme. It is shown that SEA has better linearity than a parallel plate type actuator and stronger force than a comb-drive based actuator. The moving and the fixed electrodes are arranged to make the driving force perpendicular to the rotating moment of arm. By changing the electrode overlap length, the magnitude of electrostatic force and stable displacement will be changed. In order to optimize the design, an electrostatic FE analysis was carried out and an empirical force model was established for SEA. A new assembly method which will allow the active electrodes to be located beneath the slider was developed. The active electrodes are connected by inner and outer rings lifted on the base substrate, and the inner and outer rings are connected to platform on which the slider locates. Electrostatic force between active electrodes and platform can be used for exiting out of plane modes, so this provides the possibility of the flying height control. A microactuator that can position the pico-slider over ${\pm}0.5{\mu}m$ using under 20 volts for a 2 kHz fine-tracking servo was designed and fabricated using SoG process.