• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.2
• /
• pp.23-31
• /
• 2021

Surface texturing is a promising route to reduce the friction forces between two surfaces in sliding contact. To this end, the fabrication of micro dimples is one of the most widely used surface texturing methods. According to published results, textured surfaces with elliptical micro dimples offer the best friction performance. Therefore, we fabricated elliptical micro dimples on carbon steel (SM45C) by using dual frequency vibration assisted machining. High and low frequencies of 16.3 kHz and 230 Hz were applied to the 3D resonant elliptical vibrator. The 3D resonant elliptical vibrator with a triangular cubic boron nitride insert was assembled on a computer numerically controlled turning lathe. Oval micro dimples of various profiles were manufactured on carbon steel. In terms of the profile of the elliptical micro dimples, the experimental results indicated that the average micro dimple width and depth were 112 ㎛ and 7.7 ㎛. These dimensions are closely related to the cutting conditions and can be easily controlled.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.6
• /
• pp.507-514
• /
• 2022

This study proposes an optimal design process for a high-frequency transformer that has a large leakage inductance for dual-active-bridge converters. Notably, conventional design processes have large errors in designing leakage transformers because mathematically modeling the leakage inductance of such transformers is difficult. In this work, the geometric parameters of a shell-type transformer are identified, and finite element analysis(FEA) simulation is performed to determine the magnetization inductance, leakage inductance, and copper loss of various shapes of shell-type transformers. Regression models for magnetization and leakage inductances and copper loss are established using the simulation results and the machine learning technique. In addition, to improve the regression models' performance, the regression models are tuned by adding featured parameters that consider the physical characteristics of the transformer. With the regression models, optimal high-frequency transformer designs and the Pareto front (in terms of volume and loss) are determined using NSGA-II. In the Pareto front, a desirable optimal design is selected and verified by FEA simulation and experimentation. The simulated and measured leakage inductances of the selected design match well, and this result shows the validity of the proposed design process.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.1
• /
• pp.8-14
• /
• 2022

A computer simulation was performed to investigate the heat source distribution and temperature distribution of a laser having multiple characteristics. To simulate the actual size of a welding specimen, the temperature distributions at 0 s, 1 s, and 2 s were analyzed by increasing the domain size to 50 mm in length and 25 mm in width in a material of the same thickness. As indicated by the results, because of the characteristics of metals with high thermal conductivity, the temperature at the welding center line and the temperature distribution at the offset position were not significant. When the core part was cooled by irradiating with a laser, it cooled at a rate of up to 500 ℃/s. In contrast, when the laser was irradiated to the ring part, the cooling proceeded at a rate of over 1800 ℃/s. Comparing the relative numerical values rather than the absolute values, it was found that the cooling rate was approximately 3.6 times faster when the laser was irradiated through the ring than when the laser was irradiated through the core. As a result of irradiating with the same heat source (at 100 W) into the core, ring, and ring + core, it was confirmed that the highest temperature was irradiated to the ring part and the lowest temperature was irradiated to the core part.

• Asia pacific journal of information systems
• /
• v.29 no.4
• /
• pp.591-614
• /
• 2019

With the proliferation of social media, it has become easier for people to spread rumors online, which can aggravate the issues arising from online rumors. There are many individuals and organizations that are adversely affected by malicious online rumors. Despite their importance, there has been little research into why and how people spread rumors online, thus inhibiting the understanding of factors that affect the spreading of online rumors. With attention seeking to address this gap, this paper draws upon the dual process theory and the de-individuation theory to develop a theoretical model of factors affecting the spreading of an online rumor, and then empirically tests it using survey data from 211 individuals about a specific rumor. The results indicate that the perceived credibility of the rumor affects the individuals' attitudes toward spreading it, which consequently affects the rumor spreading behavior. Vividness, confirmation of prior beliefs, argument strength, and source credibility positively influence the perceived credibility of online rumors. Finally, anonymity moderates the relationship between attitude toward spreading online rumors and the spreading behavior.

• Geomechanics and Engineering
• /
• v.36 no.2
• /
• pp.121-130
• /
• 2024

Many foundation projects are built on red-bed soft rocks, and the damage evolution of this kind of rocks affects the safety of these projects. At present, there is insufficient research on the damage evolution of red-bed soft rocks, especially the progressive process from mesoscopic texture change to macroscopic elastoplastic deformation. Therefore, based on the dual-porosity characteristics of pores and fissures in soft rock, we adopted a cellular automata model to simulate the propagation of these voids in soft rocks under an external load. Further, we established a macro-mesoscopic damage model of red-bed soft rocks, and its reliability was verified by tests. The results indicate that the relationship between the number and voids size conformed to a quartic polynomial, whereas the relationship between the damage variable and damage porosity conformed to a logistic curve. The damage porosity was affected by dual-porosity parameters such as the fractal dimension of pores and fissures. We verified the reliability of the model by comparing the test results with an established damage model. Our research results described the progressive process from mesoscopic texture change to macroscopic elastoplastic deformation and provided a theoretical basis for the damage evolution of these rocks.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.1
• /
• pp.79-84
• /
• 2020

Unlike a printing process, it is difficult to pattern organic thin films in the longitudinal (coating) direction using a coating process. In this paper, we have investigated the feasibility of patterning organic thin films using needles. To this end, we have slot-coated an aqueous poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) solution in the form of a fine stripe or large area and then applied the dual needle; one for discharging the main solvent of the underlying thin film and the other for sucking the dissolved thin film. We have found that the pattern width and depth increase as the moving speed of the plate decreases. However, it is observed that the sidewall slope is very gentle (the length of the slope is of the order of 200 ㎛) due to the fact that the discharged main solvent is widely spread and then isotropic etching occurs. With this scheme, we have also demonstrated that a fine stripe can be obtained by scanning the dual needle closely. To demonstrate its applicability to solution-processable organic light-emitting diodes (OLEDs), we have also fabricated OLED with the patterned PEDOT:PSS stripe and observed the insulation property in the strong light-emitting stripe.

• Transactions on Electrical and Electronic Materials
• /
• v.5 no.5
• /
• pp.180-184
• /
• 2004

This paper proposes a novel methodology of systematic global calibration and validates its accuracy and efficiency with application to memory and logic devices. With 175 SIMS profiles which cover the range of conditions of implant and diffusion processes in the fabrication lines, the dominant diffusion phenomenon in each process temperature region has been determined. Using the dual-pearson implant model and fully-coupled diffusion model, the calibration was performed systematically. We applied the globally calibrated process simulator parameters to memory and logic devices to predict the optimum process conditions for target device characteristics.

• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2012

This study investigates an application of the Hamming network-dual extended Kalman filter (DEKF) based on pattern recognition for high accuracy state-of-charge (SOC)/capacity estimation and state-of-health (SOH) prediction at various temperatures. The averaged nine discharging/charging voltage-temperature (DCVT) patterns for ten fresh Li-Ion cells at experimental temperatures are measured as representative patterns, together with cell model parameters. Through statistical analysis, the Hamming network is applied to identify the representative pattern that matches most closely with the pattern of an arbitrary cell measured at any temperature. Based on temperature-checking process, model parameters for a representative DCVT pattern can then be applied to estimate SOC/capacity and to predict SOH of an arbitrary cell using the DEKF. This avoids the need for repeated parameter measuremet.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.19
• /
• pp.8019-8026
• /
• 2014

The promyelocytic leukemia (PML) gene is a gene known to be a tumor suppressor, although recent data suggest that it has a dual function in tumorigenesis. It was initially discovered in acute promyelocytic leukemia (APL) in which a t(15; 17) chromosomal translocation fused it to the retinoic acid receptor alpha ($RAR{\alpha}$). It has been shown to be involved in various types of cancer. It has at least 6 nuclear isoforms and a cytoplasmic type with different characteristics. Its multiple functions in growth inhibition, apoptosis induction, replicative senescence, inhibition of oncogenic transformation, and suppression of migration and angiogenesis have made it a therapeutic target for cancer therapy. However, its dual role in the process of tumorigenesis has made this field challenging. In this review, we discuss PML structure, functions and expression in tumors.

• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.345-352
• /
• 1997

Recently, in designing optical mask such as 4GDRAM, the scattering effect of electromagnetic wave must be considered. For this reason we claculated directly the mask function using the finite difference time domain(FDTD) method. The modification of image theory with this new mask function could explain clearly the scattering effect at the etched side wall of the submicron optical mask. The characteristics of the various type of alternating PSM were investigated. According to the simulation, the dual wet etch process was the most useful fabrication technique to overcoe the light scattering off at the shifted opening.