References
- Liu, W., Ni, H., Chen, H., Wang, P., "Numerical simulation and experimental investigation on tribological performance of micro-dimples textured surface under hydrodynamic lubrication," International Journal of Mechanical Sciences, Vol. Vol. 163, 2019.
- Wang, X., Kato, K., Adachi, K., Aizawa, K., "Loads carrying capacity map for the surface texture design of SiC thrust bearing sliding in water," Tribology International, Vol. 36, Issue 3, pp. 189-197, 2003. https://doi.org/10.1016/S0301-679X(02)00145-7
- Tang, W., Zhou, Y., Zhu, H., Yang, H., "The Effect of surface texturing on reducing the friction and wear of steel under lubricated sliding contact," Applied Surface Science, Vol. 273, pp.199-204, 2013. https://doi.org/10.1016/j.apsusc.2013.02.013
- Wang, X., Liu, W., Zhou, F., Zhu, D., "Preliminary investigation of the effect of dimple size on friction in line contacts," Tribology International, Vol. 42, Issue 7, pp. 1118-1123, 2009. https://doi.org/10.1016/j.triboint.2009.03.012
- Nakano, M., Korenaga, A., Miyake, K., Murakami, T., Ando, Y., et al "Applying micro-texture to cast iron surfaces to reduce the friction coefficient under lubricated conditions," Tribology Letters, Vol. 28, pp. 131-137, 2007. https://doi.org/10.1007/s11249-007-9257-2
- Kurniawan, R., Ko, T. J., "A study of surface texturing using piezoelectric tool holder actuator on conventional CNC turning," International Journal of Precision Engineering and Manufacturing, Vol. 14, No. 2, pp. 199-206, 2013. https://doi.org/10.1007/s12541-013-0028-8
- Qiu, Y., Khonsari, MM., "Experimental investigation of tribological performance of laser textured stainless steel rings," Tribology International, Vol. 44, Issue 5, pp. 635-644, 2011. https://doi.org/10.1016/j.triboint.2011.01.003
- Zhang, D., Zhao, F., Li, Y., Li, P., Zeng, Q., Dong, G., "Study on tribological properties of multi-layer surface texture on Babbitt alloys surface," Applied Surface Science, Vol. 390, pp. 540-549, 2016. https://doi.org/10.1016/j.apsusc.2016.08.141
- Wakuda, M., Yamauchi, Y., Kanzaki, S., Yasuda, Y., "Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact," Wear, Vol. 254, Issue 3-4, pp. 356-363, 2003. https://doi.org/10.1016/S0043-1648(03)00004-8
- Kurniawan, R., Kumaran, ST., Ali, S., Nurcahyaningsih, DA., Kiswanto, G., Ko, T. J., "Experimental and analytical study of ultrasonic elliptical vibration cutting on AISI 1045 for sustainable machining of round-shaped microgroove pattern," The International Journal of Advanced Manufacturing Technology, Vol. 98, pp. 2031-2055, 2018. https://doi.org/10.1007/s00170-018-2359-1
- Kurniawan, R., Ko, T. J., "Cutting Force Model in Micro-Dimple Pattern Process Using Two-Frequency Elliptical Vibration Texturing(TFEVT) Method," International Journal of Precision Engineering and Manufacturing, Vol. 20, pp. 1-11, 2019. https://doi.org/10.1007/s12541-019-00035-x
- Kurniawan, R., Kiswanto, G., Ko, T. J., "Surface roughness of two-frequency elliptical vibration texturing (TFEVT) method for micro-dimple pattern process," International Journal of Machine Tools and Manufacture, Vol. 116, pp. 77-95, 2017. https://doi.org/10.1016/j.ijmachtools.2016.12.011
- Park, G. C., Ko, T. J., Kurniawan, R., Saood, A., "Analyzing Friction Coefficient and Wettability of Micro-Dimple Fabricated Using Elliptical Vibration Texturing Method," The Korean Society of Manufacturing Process Engineers, Vol. 19, Issue 5, pp. 38-44, 2020.
- Sriswat, M., Kimapong, K., Chanchana, A., "Study on factors which make CBN insert can turn S45C steel have surface roughness less than Ra 0.4," Key Engineering Materials, Vol. 805, pp. 3-7, 2019. https://doi.org/10.4028/www.scientific.net/kem.805.3
- Hascalik, A., Caydas, U., "Optimization of turning parameters for surface roughness and tool life based on the Taguchi method," The International Journal of Advanced manufacturing Technology, Vol. 38, pp. 896-903, 2008. https://doi.org/10.1007/s00170-007-1147-0
- Yang, W. H., Tarng, Y. S., "Design optimization of cutting parameters for turning operations based on the Taguchi method," Journal of Materials Processing Technology, Vol. 84, Issue 1-3, pp. 122-129, 1998. https://doi.org/10.1016/S0924-0136(98)00079-X
- Ilhan, A., Harun, A., "Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method," Measurement, Vol. 44, Issue. 9, pp. 1697-1704, 2011. https://doi.org/10.1016/j.measurement.2011.07.003
- Kurniawan, R., Ali, S., Park, K. M., Li, C. P., Ko, T. J., "Development of a Three-Dimensional Ultrasonic Elliptical Vibration Transducer (3D-UEVT) Based on Sandwiched Piezoelectric Actuator for Micro-grooving," International Journal of Precision Engineering and Manufacturing, Vol. 20, pp. 1229-1240, 2019. https://doi.org/10.1007/s12541-019-00126-9
- Kurniawan, R., Ko, T. J., Kumaran, ST., Kiswanto, G., Guo, P., et al "Development of a two-frequency, elliptical-vibration texturing device for surface texturing," Journal of Mechanical Science and Technology, Vol. 31, pp.3465-3473, 2017. https://doi.org/10.1007/s12206-017-0635-x
- Kurniawan, R., Ko, T. J., "Surface topography analysis in three-dimensional elliptical vibration texturing (3D-EVT)," The International Journal of Advanced Manufacturing Technology, Vol. 102, pp. 1601-1621, 2019. https://doi.org/10.1007/s00170-018-03253-1