• 전자공학회논문지A
• /
• 제32A권9호
• /
• pp.106-113
• /
• 1995

The radiation characteristics of the subreflector of a shaped dual offset reflector antenna are analyzed by the uniform theory of diffraction(UTD). The discrete shaped subreflector profile is transformed into an analytic function by the global interpolation. To obtain the first and the second derivative terms on the surface, the local interpolation method is used. The reflection point needed for the geometrical optics(GO) is found by using the multi-dimensional function minimizing algorithm. The radiation pattern of a Gregorian type shaped subreflector is presented. The characteristics of the radiation patterns for various feed edge taperings and frequencies are examined.

• Journal of the Optical Society of Korea
• /
• 제13권4호
• /
• pp.478-483
• /
• 2009

An optical sheet with a cone array is designed, simulated, and fabricated in order to substitute the dual crossed prism sheets in the edge-type LCD backlight. The optimum structure of cone textures that is compatible with the dual crossed prism sheets was obtained by simulating the backlight installed with the cone array optical sheet. A SU-8 photoresist films of thickness $30{\sim}50{\mu}m$ were spin-coated on a polyethylene terephtalate film (PET), and the cone texture array was formed by using the diffuse lithography that employed a photomask with circular patterns and an optical diffuser.

• Clinics in Shoulder and Elbow
• /
• 제20권4호
• /
• pp.236-239
• /
• 2017

After dual plating with a locking compression plate for comminuted intraarticular fractures of the distal humerus, the incidence of ulnar nerve injury after surgery has been reported to be up to 38%. This can be reduced by an anterior transposition of the ulnar nerve but some surgeons believe that extensive handling of the nerve with transposition can increase the risk of an ulnar nerve dysfunction. This paper reports ulnar nerve injuries caused by the incomplete insertion of a screw head in dual plating without an anterior ulnar nerve transposition for AO/OTA type C2 distal humerus fractures. When an anatomical locking plate is applied to a distal humeral fracture, locking screws around the ulnar nerve should be inserted fully without protrusion of the screw because an incompletely inserted screw can cause irritation or injury to the ulnar nerve because the screw head in the locking system usually has a slightly sharp edge because screw head has threads. If the change in insertion angle and resulting protruded head of the screw are unavoidable for firm fixation of fracture, the anterior transposition of the ulnar nerve is recommended over a soft tissue shield.

• 한국정보통신학회논문지
• /
• 제15권3호
• /
• pp.654-659
• /
• 2011

반도체 레이저의 직접 변조 시에 발생하는 레이저의 주파수 처핑(chirping) 현상을 감소시켜 직접 변조를 하는 레이저 다이오드의 변조 특성을 향상시키기 위하여 이중 전극을 가진 구조의 반도체 레이저를 제안하였다. 이중 전극 레이저는 일반적인 측면 방출형 반도체 레이저와 달리 하나의 광이득 매질에 대하여 전기적으로 전극을 분리한 구조이다. 본 논문에서는 이중 전극 구조의 반도체 레이저를 이용하여 직접 변조시 발생하는 처핑(chirping)과 이에 따른 광신호의 선폭을 감소시킴으로써 단일 전극 구조의 레이저 다이오드와 비교하여 10-Gbps NRZ(non-return-to zero) 신호의 80-km 광전송에 대하여 2.5 dB의 광링크 수신감도 향상을 달성하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권1호
• /
• pp.53-63
• /
• 2022

In the paper, we propose a TSCH-based scheduling scheme for IEEE 802.15.4e, which is able to perform the scheduling of its own network by avoiding collision from interference network cluster (INC). Firstly, we model a bipartite graph structure for presenting the slot-frame (channel-slot assignment) of TSCH. Then, based on the bipartite graph edge weight, we utilize the Hungarian assignment algorithm to implement a scheduling scheme. We have employed two features (maximization and minimization) of the Hungarian-based assignment algorithm, which can perform the assignment in terms of minimizing the throughput of INC and maximizing the throughput of own network. Further, in this work, we called the scheme "dual-stage Hungarian-based assignment algorithm". Furthermore, we also propose deep learning (DL) based deep neural network (DNN)scheme, where the data were generated by the dual-stage Hungarian-based assignment algorithm. The performance of the DNN scheme is evaluated by simulations. The simulation results prove that the proposed DNN scheme providessimilar performance to the dual-stage Hungarian-based assignment algorithm while providing a low execution time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1986년도 하계학술대회논문집
• /
• pp.591-594
• /
• 1986

An asymptotic solution of electro-magnetic waves diffracted by a dielectric wedge of the angle larger than $180^{\circ}$ is obtained in case of the incidence of a E-polarized plane wave. Based on the dual integral equation in the spectral domain, physical optics approximation is supplemented by correction currents distributed along the interfaces. Those currents are expanded in a series of Bessel functions, known as Neumann's expansion of which fractional order is chosen to satisfy the static edge condition as the limiting value of dynamic case. Numerical results of edge diffraction patterns and field patterns are presented for some typical cases.

• 한국통신학회논문지
• /
• 제21권7호
• /
• pp.1677-1684
• /
• 1996

The theory of optimal stack filtering has been used in difference of estimates(DoE) approach to the detection of intensity edges in noisy image. In this approach, stack filters are applied to a noisy image to obtain local estimates of the dilated and eroded versions of the noise-free image. Thresholding the difference between these two estimates produces the estimated edge map. In this paper, the DoE approach is modified by imposing a symmetry condition of the data used to train the two stack filers. Under this condition, the stack filters obtained are duals of each other. Only one filter must therefore be trained;the other is simply its dual. They also produce statistially unbiased estimates. This new technique is called the symmetric Difference of Estimates (SDoE) approach.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2172-2179
• /
• 2002

In this paper, we examine the dynamic electromechanical behavior of an edge crack in a piezoelectric ceramic layer bonded between two elastic layers under the combined anti-plane mechanical shear and in-plane electric transient loadings. We adopted both the permeable and impermeable crack boundary conditions. Fourier transforms are used to reduce the problem to the solution of two pairs of dual integral equations, which are then expressed to a Fredholm integral equation of the second kind. Numerical values on the dynamic energy release rate are presented to show the dependences upon the geometry, material combination, electromechanical coupling coefficient and electric field.

• 한국콘텐츠학회논문지
• /
• 제13권10호
• /
• pp.46-53
• /
• 2013

원전 핵 연료봉에 대한 검사는 고준위 방사능의 위험으로부터 원격에서 이루어져야 하며, 또한 정확하게 이루어져야 한다. 현재 원전 핵 연료봉에 대한 검사는 방사능의 위험으로 인해 카메라로 핵 연료봉을 촬영하여 녹화된 동영상을 원격에서 보고 판단하는 형태로 운영되고 있다. 본 연구는 원자력 발전소에서 사용되는 핵 연료봉에 대한 상태 검사를 영상처리를 통하여 구현한 것이다. 핵 연료봉은 여러 개를 다발로 묶어 사용하도록 되어있는데, 이를 검사하기위한 영상처리 기법으로는 에지 검출 기법이 유용하다. 핵 연료봉 에지 검출을 위해 DoG 기법에 임계값 처리를 추가하는 방법을 제안한다. 이것은 DoG를 최적화한 새로운 기법으로, DoG와 임계값을 듀얼로 처리하는 방법이다. 이 방법으로 핵 연료봉 에지를 검출한 후에, 핵 연료봉 검사 알고리즘을 수행하여 핵 연료봉 이상 유무를 판단한다. 이러한 방법을 통해 미니어처로 제작된 핵 연료봉 검사시스템에 실험한 결과 우수한 특성을 확인하였다. 본 연구를 통해 원전 핵 연료봉 상태 검사를 보다 쉽고 안전하게 시행할 수 있을 것으로 생각된다.

• 한국도로학회논문집
• /
• 제17권6호
• /
• pp.37-45
• /
• 2015

PURPOSES : The purpose of this study is to validate the design criteria of the concrete modular road system, which is a new semi-bridge-type concept road, through a comparison of numerical analysis results and actual loading test results under static axial loads. METHODS : To design the semi-bridge-type modular road, both the bridge design code and the concrete structural design code were adopted. The standard truck load (KL-510) was applied as the major traffic vehicle for the design loading condition. The dimension of the modular slab was designed in consideration of self-weight, axial load, environmental load, and combined loads, with ultimate limit state coefficients. The ANSYS APDL (2010) program was used for case studies of center and edge loading, and the analysis results were compared with the actual mock-up test results. RESULTS : A full-scale mock-up test was successfully conducted. The maximum longitudinal steel strains were measured as about 35 and 83.5 micro-strain (within elastic range) at center and edge loading locations, respectively, under a 100 kN dual-wheel loading condition by accelerating pavement tester. CONCLUSIONS : Based on the results of the comparison between the numerical analysis and the full-scale test, the maximum converted stress range at the edge location is 32~51% of the required standard flexural strength under the two times over-weight loading condition. In the case of edge loading, the maximum converted stresses from the Westergaard equation, the ANSYS APDL analysis, and the mock-up test are 1.95, 1.7, and 2.3 times of that of the center loading case, respectively. The primary reason for this difference is related to the assumption of the boundary conditions of the vertical connection between the slab module and the crossbeam module. Even though more research is required to fully define the boundary conditions, the proposed design criteria for the concrete modular road finally seems to be reasonable.