• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.403-405
• /
• 2003

Ad Hoc 네트워크에서 Threshold-Tuning을 통한 노드들간의 균형적인 에너지 소모를 위한 알고리즘 (BECT : A Balanced Energy Consumption Algorithm by Threshold-Tuning)을 제안한다. BECT는 노드간 에너지 균형을 맞추어 네트워크의 수명 (Network Lifetime)을 연장한다. 제안한 알고리즘은 DSR (Dynamic Source Routing) 프로토콜을 기반으로 구현하였으며, GloMoSim 2.0을 이용하여 실험을 하였다. 실험 결과 BECT가 실험 토폴로지에 따라 DSR의 에너지 균형을 17-31% 향상시키며, 데이터 전송율이나 제어 패킷 비율에 있어서도 향상된 성능을 보여준다.

• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.325-336
• /
• 2005

Mobile ad hoc networks (MANET) are composed of moving wireless hosts which, within range of each other, form wireless networks. For communication to occur between hosts that are not within each other's range, routes involving intermediate nodes must be established; however, since the hosts may be in motion, a host that was part of a route may move away from its upstream and downstream partners, thus breaking the route. In this paper, we propose anticipated route maintenance (ARM) protocol with two extensions to route discovery based routing scheme: Extend the route when nodes on a link move apart from each other and they have common neighbor that can be 'inserted' in the path, and shrink route when a node discovers that one of its neighbor which is not the next hop is also on the same route several hops later on. By utilizing only local geographic information (now a part of some route finding algorithms), a host can anticipate its neighbor's departure and, if other hosts are available, choose a host to bridge the gap, keeping the path connected. We present a distributed algorithm that anticipates route failure and performs preventative route maintenance using location information to increase a route lifespan. The benefits are that this reduces the need to find new routes (which is very expensive) and prevents interruptions in service. As the density of nodes increases, the chance to successfully utilize our route maintenance approach increases, and so does the savings. We have compared the performance of two protocols, pure dynamic source routing (DSR) protocol and DSR with ARM. The simulation results show how ARM improves the functionality of DSR by preventing the links in the route from breaking. Packets delivery ratio could be increased using ARM and achieved approximately $\100%$ improvement. The simulations clarify also how ARM shows a noticeable improvement in dropped packets and links stability over DSR, even though there is more traffic and channel overhead in ARM.

• Journal of KIISE:Information Networking
• /
• v.30 no.2
• /
• pp.252-259
• /
• 2003

In the case of link congestion, most of the existing ad-hoc routing protocols like AODV and DSR do not try to discover a new route if there is no change in the network topology. Hence, with low mobility, traffic may get concentrated on some specific nodes. Since mobile devices have low battery power and low computing capability, traffic concentration on a specific node is not a desirable phenomenon. Therefore, in this paper, we propose a new protocol called SLAP (Simple Load-balancing Ad-hoc routing Protocol) which resolves the traffic concentration problem by letting each node check its own load situation and give up its role as a packet forwarder gracefully in the case of high traffic load. We compare the performance of SLAP with that of AODV and DSR in terms of the forwarding traffic distribution.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.2
• /
• pp.137-142
• /
• 2010

Although multi-model speech recognizer has been shown to be quite successful in noisy speech recognition, the results were based on general speech front-ends which do not take into account noise adaptation techniques. In this paper, for the accurate evaluation of the multi-model based speech recognizer, we adopted a quite noise-robust speech front-end, AFE, which was proposed by the ETSI for the noisy DSR environment. For the performance comparison, the MTR which is known to give good results in the DSR environment has been used. Also, we modified the structure of the multi-model based speech recognizer to improve the recognition performance. N reference HMMs which are most similar to the input noisy speech are used as the acoustic models for recognition to cope with the errors in the selection of the reference HMMs and the noise signal variability. In addition, multiple SNR levels are used to train each of the reference HMMs to improve the robustness of the acoustic models. From the experimental results on the Aurora 2 databases, we could see better recognition rates using the modified multi-model based speech recognizer compared with the previous method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.1
• /
• pp.343-364
• /
• 2021

In the 5G era, the communication networks tend to be ultra-densified, which will improve the accuracy of indoor positioning and further improve the quality of positioning service. In this study, we propose an indoor three-dimensional (3D) dynamic reconstruction fingerprint matching algorithm (DSR-FP) in a 5G ultra-dense network. The first step of the algorithm is to construct a local fingerprint matrix having low-rank characteristics using partial fingerprint data, and then reconstruct the local matrix as a complete fingerprint library using the FPCA reconstruction algorithm. In the second step of the algorithm, a dynamic base station matching strategy is used to screen out the best quality service base stations and multiple sub-optimal service base stations. Then, the fingerprints of the other base station numbers are eliminated from the fingerprint database to simplify the fingerprint database. Finally, the 3D estimated coordinates of the point to be located are obtained through the K-nearest neighbor matching algorithm. The analysis of the simulation results demonstrates that the average relative error between the reconstructed fingerprint database by the DSR-FP algorithm and the original fingerprint database is 1.21%, indicating that the accuracy of the reconstruction fingerprint database is high, and the influence of the location error can be ignored. The positioning error of the DSR-FP algorithm is less than 0.31 m. Furthermore, at the same signal-to-noise ratio, the positioning error of the DSR-FP algorithm is lesser than that of the traditional fingerprint matching algorithm, while its positioning accuracy is higher.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.9
• /
• pp.920-926
• /
• 2007

Establishing a fixed path for the message delivery through a wireless network is impossible due to the mobility. Among the number of routing protocols that have been proposed for wireless ad-hoc networks, the AODV(Ad-hoc On-demand Distance Vector) algorithm is suitable in the case of highly dynamic topology changes, along with ZigBee Routing(ZBR), with the exception of route maintenance. Accordingly, this paper introduces a routing scheme focusing on the energy efficiency and route discovery time for wireless alarm systems using IEEE 802.15.4-based ZigBee. Essentially, the proposed routing algorithm utilizes a cluster structure and applies ZBR within a cluster and DSR (Dynamic Source Routing) between clusters. The proposed algorithm does not require a routing table for the cluster heads, as the inter-cluster routing is performed using DSR. The performance of the proposed algorithm is evaluated and compared with ZBR using an NS2 simulator. The results confirm that the proposed Cluster-based AODV (CAODV) algorithm is more efficient than ZBR in terms of the route discovery time and energy consumption.

• Korean Journal of Metals and Materials
• /
• v.48 no.10
• /
• pp.942-950
• /
• 2010

The microstructure and mechanical properties of a Cu-Fe-P copper alloy processed by differential speed rolling (DSR) were investigated in detail. The copper alloy, with a thickness of 3 mm, was rolled to 50% reduction at ambient temperature without lubrication with a differential speed ratio of 2.0:1 and then annealed for 0.5h at various temperatures ranging from 100 to $800^{\circ}C$. Conventional rolling was performed under the same rolling conditions for comparison. The shear strain introduced by the conventional rolling process showed positive values at the positions of the upper roll side and negative values at the positions of the lower roll side. However, the result was zero or positive values at all positions for samples rolled by DSR. The effects of DSR on the microstructure and mechanical properties of the as-rolled and subsequently annealed samples are discussed.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.11-20
• /
• 2013

PURPOSES : This study is to develop a method to evaluate the compaction effects of asphalt binders using WMA additives and compare their compaction effects on two types of WMA additives, two types of testing temperatures, and three types of asphalt film thicknesses. METHODS : This study is based on laboratory experiments and rheological analysis of the experimental results. Testing materials are aggregate disks, asphalt, and WMA additives. The main testing method is the stress sweep test by using dynamic shear rheometer (DSR). In addition, the testing parameters obtained from the stress sweep results to evaluate lubrication effects are complex modulus and LVE-Limit. RESULTS : At both the first compaction condition ($110^{\circ}C$, 0.3mm) and second compaction condition ($80^{\circ}C$, 0.2mm) assumed, LEADCAP showed better compaction effects than Sasobit. CONCLUSIONS : The temperature $30^{\circ}C$ lower than general compaction temperatures can provide a better sensitivity for the evaluation of compaction effects. If a testing temperature and film thickness are grouped for the proper compaction conditions in the testing results, the compaction performance of each WMA additive can be more clearly discriminated in the grouped testing results matched with the grouped conditions.

• Journal of Multimedia Information System
• /
• v.6 no.2
• /
• pp.61-66
• /
• 2019

VANET (Vehicular Ad-hoc Network) is a mobile Ad-hoc Network which deals with the moving vehicles. VANET supports Intelligent Transport Systems (ITS) which is related to different modes of transport and traffic management techniques. VANETs enabled users to be informed and make them safer. VANET uses IEEE 802.11p standard wireless access protocol for communication. An important and necessary issue of VANET is to design routing protocols. In a network, communication takes place by the use of the routing protocols. There are mainly two types of communications used such as Vehicle to Vehicle (V2V) and Vehicle to Infrastructure (V2I) in VANET. Vehicles can send and receive messages among them and also to and from infrastructure used. In this paper, AODV, DSR and DSDV are compared by analysing the results of simulation on various metrics such as average throughput, instant throughput, packet delivery ratio and residual energy. Findings indicates utilization of AODV and DSR is more applicable for these metrics as compared to DSDV. A network simulator (NS2) is used for simulation.

• Transactions of Materials Processing
• /
• v.30 no.4
• /
• pp.195-200
• /
• 2021

In this study, we investigated the dominant processing variables that would influence the microstructural development of AA6061 deformed by differential speed rolling (DSR) at ambient temperature. For this purpose, we carried out a series of DSR on the samples to investigate the effects of roll speed ratio, sample rotation, and number of operation under specific rotation. Among these, the condition with a height reduction of 75% at a speed ratio of 1:4 through rotation along rolling direction (RR) displayed the pronounced results of more homogenous matrix-structure and superior mechanical properties than the others tested in this study. This was mainly due to the cross shearing of macro-shear pattern in segment where dynamic recrystallization took place with ease throughout the sample. Thus, an average microhardness value of 101 Hv was obtained in the present sample deformed by 4-pass DSR with RR where macro cross-shearing was effectively applied.