• 제목/요약/키워드: Drying temperature

검색결과 1,497건 처리시간 0.029초

인공조림(人工造林) 침엽수재(針葉樹材)의 열판건조(熱板乾燥) (Press-drying of Plantation Softwood Lumber)

  • 정희석;이남호;여환명
    • Journal of the Korean Wood Science and Technology
    • /
    • 제21권3호
    • /
    • pp.61-66
    • /
    • 1993
  • 24mm-thick specimens from three species of plantation-grown softwood were press dried under two platen pressures of 1.75kgf/$cm^2$ and 3.50kgf/$cm^2$ to obtain drying information regarding to drying rate, thickness shrinkage and drying defects. The influence of platen pressure on drying fare in range of moisture content (30 to 10 percent) increased for pitch pine and larch, but reduced for korean white pine at higher pressure. Thickness shrinkage was increased at the higher pressure, and estimated thickness shrinkage at final MC of 10 percent became unrealistically greater for specimens containing higher final moisture content under the great influence of compressive strain. The effects of pressure on the amount of surface checks and honeycombing were different from species used. These species should have applied lower temperature than 177$^{\circ}C$ in this study to reduce surface checks and honeycombing.

  • PDF

버어리종 담배건조시 급건엽 발생방지에 관한 연구 I. 온습도의 영향 (Studies on the Prevention of Excessive Drying Leaves during Burley Tobacco Curing I. Effect of Temperature and Relative Humidity on the Production of Excessive Drying Leaves)

  • 배성국;임해건;추홍구
    • 한국작물학회지
    • /
    • 제31권4호
    • /
    • pp.420-425
    • /
    • 1986
  • Br, 21을 공시하여 급건엽이 발생하는 환경조건을 구명하기 위하여 온습도를 시험 I과 II로 구분하여 시험 I은 주간의 온습도를 달리하고 야간은 휴건하였으며, 시험 II는 황변 이후에 주야간 동일한 온습도를 건조상 내에서 각기 달리 조사하여 처리하였던 바 그 결과를 요약하면 다음과 같다. 1. 급건엽발생은 고온 저습에 의해 과도한 탈수로 발생되었다. 2. 야간은 휴건하고 주간은 습도 75~80%일 때35$^{\circ}C$ 이하에서는 급건엽이 거의 기생되지 않았다. 3. 주야간 온습도가 일정할 경우 3$0^{\circ}C$는 75~80%, 35$^{\circ}C$는 80~85%, 4$0^{\circ}C$는 85~90%로 온도가 상승할수록 습도를 더 높여야 급건엽이 발생되지 않았다. 4. 급건엽발생이 많을 수록 물리성이 불량하였고, 내용성분이 충분히 분해되지 않았다.

  • PDF

건조 홍합 및 바지락의 저장 중 핵산관련물질 및 유기염류의 변화 (Changes in Contents of Some Taste Compounds of Dried Mussel and Baby Clam during Storage)

  • 주옥수;서권일;이용수;이종호;최상도;심기환
    • 한국식품과학회지
    • /
    • 제28권5호
    • /
    • pp.882-887
    • /
    • 1996
  • 홍합과 바지락의 건조 및 저장조건에 따른 핵산 및 그 관련물질과 유기염류의 함량변화를 조사한 결과는 다음과 같다. 홍합과 바지락 모두에서 ATP, ADP, AMP, inosine, adenosine 및 hypoxanthine의 6성분을 분석하였다. 홍합과 바지락 모두 생시료의 경우 adenosine의 함량이 높았으며, 건조 및 저장에 의해 ATP, ADP 및 AMP의 함량은 감소하고 inosone 및 hypoxanthine의 함량은 증가하였다. 그리고, TMAO, TMA및 총 creatinine의 함량은 두 시료 모두 함량이 아주 낮았으며, 건조 및 저장에 의해 TMAO 및 총 creatinine의 함량은 감소한 반면 TMA의 함량은 증가하였다.

  • PDF

향어(Cyprinus carpio)를 활용한 반건제품의 제조 및 관능 특성 (Preparation and Sensory Properties of Semi-dried Israeli Carp Cyprinus carpio)

  • 이창영;박시형;박예은;최유리;이석민;오선화;김진수
    • 한국수산과학회지
    • /
    • 제55권2호
    • /
    • pp.121-128
    • /
    • 2022
  • The aims of this study were to optimize the processing procedure of high-quality semi-alternating temperature dried Israeli carp Cyprinus carpio (SAD-IC) and to investigate the sensory properties of the product. Based on the differences in moisture content of the dorsal and ventral muscles, high quality SAD-IC was prepared by alternating the drying temperature between 4 h at 35℃, and 2 h at 5℃, three times before final drying for 2 h at 35℃. The surface in SAD-IC produced under the optimal alternating-temperature drying process had a markedly superior browning index value and softer texture compared to products produced using constant-temperature drying. SAD-IC produced from dorsal and ventral muscle had significantly superior taste values than the raw material. These results suggest that SAD-IC has the potential to be industrialized.

CO2 고정 탈황석고를 사용한 슬래그 시멘트의 기초적 특성 (Basic Characteristics of Slag Cement using CO2 Fixed Desulfurized Gypsum)

  • 박천진;박종호;서성관
    • 한국건설순환자원학회논문집
    • /
    • 제11권1호
    • /
    • pp.25-31
    • /
    • 2023
  • 본 연구에서는 CO2 고정화 탈황석고(CFBG)의 건조온도에 따른 기초 물성 및 슬래그 시멘트의 자극재로 활용 가능성을 검토하였으며, 콘크리트 배합 시험을 통한 성능평가를 진행하였다. CFBG의 주요 성분은 CaO 및 SO3로 나타났으며 건조온도가 증가함에 따라 CaO 및 SO3가 증가하였다. 미건조 CFBG는 함수율이 15.7 %로 나타났으며 건조온도 85 ℃는 1.7 %, 105℃ 는 0.03 %로 나타났다. CFBG를 사용한 모르타르는 건조온도 증가에 따라 플로값이 저하하는 경향이었으며 압축강도는 FGB 사용 배합과 동등 수준을 나타냈다. CFBG SC를 사용 콘크리트 실험 결과 슬럼프 및 공기량은 60분 경과 후 모두 목표 범위를 만족하였으며, 압축강도는 일반 3성분계 배합 대비 전반적으로 증가하는 경향이었다.

Effects of Drying Conditions on the Antioxidant Activities and Volatile Compounds of Chrysanthemi Flos Flowers

  • Bae, Sung-Mun;Na, Ae-Sil;Seo, Hye-Kyeong;Lee, Seung-Cheol
    • Preventive Nutrition and Food Science
    • /
    • 제14권4호
    • /
    • pp.329-334
    • /
    • 2009
  • The effects of drying conditions on the antioxidant activities, luteolin, and volatile compounds of Chrysanthemi Flos flowers were evaluated. The flowers were dried with hot-air or far-infrared radiation at 40${^{\circ}C}$, 50${^{\circ}C}$ and 60${^{\circ}C}$, respectively, to reach 22$\pm$1% of moisture content. Each 10 g of the dried flowers were extracted with 100 mL of 95% ethanol. Increasing temperature in hot-air dried (HAD) conditions increased the antioxidant activities of the flower extracts. However, increasing temperature in far-infrared dried (FID) conditions decreased the antioxidant activities of the extracts. Luteolin, one of main flavonoids of Chrysanthemi Flos flowers, was present in the highest content at 60${^{\circ}C}$ FID flowers with a value of 139 $\mu$g/mL. Thirteen volatile compounds including camphor and β-caryophyllene were identified in chromatograms. Higher amount of the volatiles were found at 50${^{\circ}C}$ HAD and 40${^{\circ}C}$ FID. The results indicated that the antioxidant activities and volatile compounds of Chrysanthemi Flos flowers were significantly affected by drying conditions.

Heatset 윤전 오프셋 인쇄에서 인쇄주름에 대한 인쇄조건의 영향 (Effect of Printing Conditions on Fluting in Heatset Web Offset Printing)

  • 전성재;윤종태
    • 펄프종이기술
    • /
    • 제41권1호
    • /
    • pp.52-60
    • /
    • 2009
  • A printing defect known as fluting (or waviness) of the web printed by heatset web offset printing process is one of the chronically serious problems deteriorating print quality. In this paper, fluting occurrence on uncoated papers was explored in terms of many printing conditions including drying temperature, fountain solution amount, ink supply, and press configurations. For this purpose, fluting on prints from real press runs was appraised in a quantitative manner. As results, ink supply was a distinctive factor for fluting such that the lower ink amount, the milder fluting. However increase in fountain solution seemed to make fluting severer while the effect of drying temperature was inconsistent for each paper. This result might indicate variable drying requirements for each paper. Thereby it was suggested that the optimum drying conditions related to the printabilities of each paper need to be established to minimize fluting potential. A press with short dryer and drastic cooling unit produced higher fluting. Suggestions for future work were given along with interpretation for the results.

Optimization of Drying Conditions for Quality Semi-dried Mulberry Fruit (Morus alba L.) using Response Surface Methodology

  • Teng, Hui;Lee, WonYoung
    • Current Research on Agriculture and Life Sciences
    • /
    • 제32권2호
    • /
    • pp.67-73
    • /
    • 2014
  • Mulberry fruits were semi-dried using hot air ($60-100^{\circ}C$) or cool air ($20-40^{\circ}C$), and the effects of the drying temperature and processing time on the quality of the final dried mulberry fruits were investigated. Response surface methodology was employed to establish a statistical model and predict the conditions resulting in minimal loss of the total phenolic content (TPC) and ascorbic acid. Thus, using overlapped contour plots, the optimal conditions for producing semi-dried mulberry fruits, which reduced the moisture residue to 45% and minimized the nutrient losses of TPC and ascorbic acid, were determined for the hot-air process ($60.7^{\circ}C$ for 5.4 h) and cool-air process ($34.8^{\circ}C$ for 23.3 h). Plus, a higher drying temperature was found to lead to a faster loss of moisture and ascorbic acid, while the TPC was significantly decreased in the cool-air dried mulberry fruits due to the higher activity of polyphenol oxidase between 30 and $40^{\circ}C$.

분말식초제조를 위한 분무건조공정의 최적화 (Optimization of Spray Drying Process for Manufacturing Dried Vinegar using Response surface methodology)

  • 황성희;정용진;윤광섭
    • 한국식품저장유통학회지
    • /
    • 제9권2호
    • /
    • pp.194-199
    • /
    • 2002
  • 천연식초를 이용하여 분말식초의 제조방법을 개발하고 아울러 분말식초의 품질특성 및 제조공정을 평가하여 분말식초의 제조 가능성을 검토하고자 하였다. 식초와 포접물질을 혼합한 포접물의 최적 농도는 피복물질의 양이 많을수록 흡습이 잘 되지 않고 열에도 안정함을 보였으나 포접물질의 양이 증가할수록 포접물질의 맛이 강하게 나타나 식초의 고유한 관능적인 특성이 떨어지므로 포접물의 농도를 30。bx 로 결정하였다. 분무건조공정을 최적화하기 위해 인입온도와 flow rate를 독립변수로 하고 분말식초의 품질특성을 나타내는 수분, 산도, 흡습성, 당함량, 열안정성 등을 종속변수로 하여 반응표면분석법을 실시한 결과, 분무공정의 최적조건은 inlet temperature는 19$0^{\circ}C$, flow rate는 550 L/h로 결정할 수 있었다.

자동차 도장 건조 공정의 건조 성능 향상을 위한 수치해석 연구 (A Numerical Study on the Improvement of the Performance of a Vehicle Paint Drying Process)

  • 최종락;허남건;김동철;김희수
    • 설비공학논문집
    • /
    • 제24권12호
    • /
    • pp.867-874
    • /
    • 2012
  • In the present study, three-dimensional transient numerical simulations were carried out to improve the performance of a vehicle paint drying process. In order to describe the movement of a vehicle, the techniques of moving boundary condition and multiple reference flames (MRF) were used. For the validation of the numerical analysis, the predicted temperature on the surface of a vehicle was compared to the experimental data, and a good agreement was achieved. With validated numerical procedure, various operating conditions of the temperature and the flow rate of the supply air were investigated to improve the drying performance of the facility. It is shown that the optimization of the operating condition can lead to energy savings and faster line speed of the production.