• Journal of Biosystems Engineering
• /
• v.20 no.1
• /
• pp.47-57
• /
• 1995

Rice Processing Complex(RPC) have being constructed with a rice mill plant and a facility of drying and storage to overcome problems caused by UR and to produce good quality of rice. An optimal design of a rice mill plant was required to successfully construct and operate it. The development of a simulation model was essential to the design of a rice mill plant. So, all the objectives of this study were to develop a simulation model for the design of a rice mill plant and to develop and evaluate the rice mill system. In this study the simulation model was developed to design a rice mill plant using SLAMSYSTEM, one of simulation languages. The results of this study were as followings. 1. A simulation model was developed with SLAMSYSTEM to represent the processes of a rice mill plant. The simulation model was used to design a rice mill pilot plant with the capacity of 0.5 ton per hour. The rice mill pilot plant was analyzed by the model with alternatives. 2. In the simulation the rice mill system was much influenced by the separating efficiency of a brown rice separator. Especially, the bottleneck of grain flow occurred at the buffer tank for brown rica. separator under 50% separating efficiency of brown rice separator. Hence, as the alternative simulation was conducted under 60% , 70% separating efficiency of brown rice separator, the bottleneck of the system could be minimized at the 60% separating efficiency of brown rice separator. 3. In the alternative simulation the bottleneck of the system was minimized under the hulling capacity of 1 t/h and 60% separating efficiency of brown rice separator with the capacity of 1 t/h. Under such a condition the max. weight of waiting entities at buffer tanks was less 250kg. So, the capacities of the buffer tanks were determined in the basis of simulation results. 4. The milled rice recovery and head rice recovery of the milling system were 74% and 92% in the simulation, respectively. These results of simulation almost corresponded to those of actual rice mill plants. The developed simulation model could be well applied to design a rice mill plant.

• Analytical Science and Technology
• /
• v.16 no.4
• /
• pp.277-282
• /
• 2003

The amount of water for the cultivation of citrus is different based on the growing period. The effect of water stress induces to enhance of sugar accumulation in citrus. The water content in the leaves of citrus can be a index for watering during cultivation. The purpose of this study is to determine the water content of citrus leaves non-destructively by using near infrared spectroscopy (NIRS). Citrus leaves were prepared from 'Okitsu' Satusuma mandarin leaves (Citrus unshiu Marc.) ranging from 20.80 to 69.98% of water content by loss on drying method, and NIR reflectance spectra of citrus leaves were acquired by using a fiber optic probe. It was found that the variation of absorbance band 1450 nm from OH vibration of water depending on the water content change. Partial least squares regression (PLSR) was applied to develop a calibration model over the spectral range 1100-1700 nm. The calibration model predicted the water content for the validation set with a standard errors of prediction (SEP) of 0.97%. In order to validate the developed calibration model, routine analyses were performed using independently prepared citrus leaves. The NIR routine analyses showed good results with those of loss on drying method with a SEP of 0.81%. The rapid and non-destructive determination of the water content in citrus leaves was successfully performed by portable NIR system.

• Korean journal of food and cookery science
• /
• v.21 no.4 s.88
• /
• pp.475-481
• /
• 2005

This study was conducted to determine the antioxidant activity of paprika in a lard model system. The effect of paprika (ground fresh paprika (FP) $3\%$, $50^{\circ}C$ far-infrared ray dried Paprika Powder (PP) $3\%$ and $5\%$) on the inhibition of lipid oxidation in lard was examined by pH, peroxide value (POV), thiobarbituric acid (TBA) value and fatty acid composition during 8 days of storage at $4^{\circ}C$. With paprika, POV and TBA values in lipid oxidation of lard were significantly lower than those of the control without paprika. Especially, in lard with FP $3\%$, there was hardly any change of lipid oxidation values such as POV, TBA values and destruction of unsaturated fatty acid inhibiting lipid oxidation. Heating of paprika during far-infrared ray drying decreased the inhibition effect on lipid oxidation in the lard model system probably due to loss of antioxidant substances, such as vitamin C, polyphenols and carotenoids including capsanthin, by heating. Therefore, FP containing a hish amount of antioxidant substance could be used as a good antioxidant in Pork Products containing large amounts of lard.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.1
• /
• pp.51-57
• /
• 2011

The objective of this study was to enhance the utilitization of Ibuprofen (IBU) by introducing the fast-disintegrating tablet (FDT) form. Presently, IBU is being widely used as a tablet or syrup form. But in contrast to these two formulations, IBU as FDT is not only convenient but also increases the control over the time release of the drug, noted by using Alginate beads. This study was carried out with Sodium Alginate and IBU at the ratios of 1:0, 1:0.5, 1:1, and 1:2 in order to produce a series of beads with different ratios. During the drying process of the beads, talc was added in beads to compare the effects with and without the talc. The final product was scanned with SEM imaging to determine the difference in the surface of the beads. The parameters assessed were the diameter, content assay, dissolution test and effectiveness of time-release. Direct compression method was used to prepare FDT containing IBU bead. The properties of FDT, such as hardness, disintegration time, were investigated. The dissolution profiles of FDT were tested using KP dissolution apparatus 1 (basket method). The results suggest addition of talc and drying the beads made the surface smooth and less vulnerable to clutter into chunks. The size of beads was less than 300 ${\mu}m$ which did not create a sandy feeling in the mouth. Thus, the beads formulation model made the sustained release of the drug possible, the hardness of FDT (1.25~1.50 $Kg/cm^2$) was acceptable and all the values of dissolving period were less than 30 seconds. The dissolution profile of FDT was same as that of IBU bead. The efficient dissolution profile and low price of IBU bead containing Sodium Alginate, the FDT formulation prepared from IBU bead can save the expenses and can improve the convenience of application of this drug.

• International Journal of Highway Engineering
• /
• v.20 no.3
• /
• pp.65-73
• /
• 2018

PURPOSES : In this study, the propriety of expansion joint spacing of airport concrete pavement was examined by using weather and material characteristics. METHODS : A finite element model for simulating airport concrete pavement was developed and blowup occurrence due to temperature increase was analyzed. The critical temperature causing the expansion of concrete slab and blow up at the expansion joint was calculated according to the initial vertical displacement at the joint. The amount of expansion that can occur in the concrete slab for 20 years of design life was calculated by summing the expansion and contraction by temperature, alkali-silica reaction, and drying shrinkage. The effective expansion of pavement section between adjacent expansion joints was calculated by subtracting the effective width of expansion joint from the summation of the expansion of the pavement section. The temperature change causing the effective expansion of pavement section was also calculated. The effective expansion equivalent temperature change was compared to the critical temperature, which causes the blowup, according to expansion joint spacing to verify the propriety of expansion joint applied to the airport concrete pavement. RESULTS : When an initial vertical displacement of the expansion joint was 3mm or less, the blowup never occurred for 300m of joint spacing which is used in Korean airports currently. But, there was a risk of blow-up when an initial vertical displacement of the expansion joint was 5mm or more due to the weather or material characteristics. CONCLUSIONS : It was confirmed that the intial vertical displacement at the expansion joint could be managed below 3mm from the previous research results. Accordingly it was concluded that the 300m of current expansion joint spacing of Korean airports could be used without blowup by controling the alkali-silica reaction below its allowable limit.

• Journal of Powder Materials
• /
• v.23 no.3
• /
• pp.235-239
• /
• 2016

This study is performed to fabricate a Ti porous body by freeze drying process using titanium hydride ($TiH_2$) powder and camphene. Then, the Ti porous body is employed to synthesize carbon nanotubes (CNTs) using thermal catalytic chemical vapor deposition (CCVD) with Fe catalyst and methane ($CH_4$) gas to increase the specific surface area. The synthesized Ti porous body has $100{\mu}M$-sized macropores and $10-30{\mu}m$-sized micropores. The synthesized CNTs have random directions and are entangled with adjacent CNTs. The CNTs have a bamboo-like structure, and their average diameter is about 50 nm. The Fe nano-particles observed at the tip of the CNTs indicate that the tip growth model is applicable. The specific surface area of the CNT-coated Ti porous body is about 20 times larger than that of the raw Ti porous body. These CNT-coated Ti porous bodies are expected to be used as filters or catalyst supports.

• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.632-637
• /
• 2009

Poly(${\varepsilon}-caprolacton$)/ethyl cellulose (PCL/EC) microcapsules containing pluronic F127 were prepared by a spray drying method. The aqueous phase, 20% of pluronic F127 was dissolved in distilled water, and the organic phase, 5% of PCL and EC were dissolved in dichloromethane. The microcapsules were obtained by spray drying the water-in-oil (W/O) emulsion. According to the data of scanning electron microscopy and particle analyzer, tens of micro size microcapsules were observed. On a differential scanning calorimeter, the phase transition temperatures of microcapsules were observed and they were found around those of pluronic F127 and poly(${\varepsilon}-caprolacton$), which were the main components of the microcapsules. At the range of $30{\sim}45^{\circ}C$, temperature-dependent release properties were investigated using fluorescein isothicyanate-dextran (FITC-dextran) and blue dextran as a model drug. When the temperature was increased, the degree of release of microcapsule was also increased. FITC-dextran, the relative low molecular weight, was more released than blue-dextran.

• Journal of the Korean Chemical Society
• /
• v.48 no.6
• /
• pp.616-622
• /
• 2004

Liposome powders were prepared by a freeze-drying method for the application to the field of drug carrier. The effect of maltose as a liposome stabilizer was studied on the stability and the drug-loading efficiency of the freeze-dried liposome powders. The particle size of liposomes before and after freeze-drying was determined to evaluate the liposome stability. The drug-loading efficiency was measured by Fluorescence spectrophotometer using calcein as a model drug. When maltose was added after the preparation of the liposomes, the liposomes was stable, compared to the case of maltose addition at the hydration procedure. By the addition of maltose, the liposome was stable for 30 days at $4{\sim}37^{\circ}C$, while the particle size of the liposome without maltose increased with time. The liposome showed relatively high stability when the maltose/lipids molar ratio was 3 and 6.

• Food Science and Preservation
• /
• v.17 no.4
• /
• pp.513-518
• /
• 2010

This study was carried out to estimate the moisture sorption characteristics and prediction model of anchovy powders with different particle size as above 80 mesh, 80-60 mesh and 40-60 mesh. The equilibrium moisture content had higher values at lower storage temperatures, and higher water activity. The monolayer moisture content calculated using the GAB equation showed a higher level of significance than that of BET equation. The estimated monolayer moisture content was 0.024-0.052 g $H_2O/g$ dry solid. The absorption enthalpy was calculated with different particle size and various water activities. It showed that the absorption energy was decreased with increasing water activity but no difference was found on particle size increasement. The fitness of the isotherm curve was shown to be in the order of Khun, Halsey, Caurie and Oswin model. The prediction model equations for the moisture content were established by ln(time), water activity, and temperature, respectively. The model equation will be helpful for future work on drying and storage of anchovy powder.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.45-54
• /
• 2006

To obtain realistic stress-strain relation in concrete, it is necessary to improve the constitutive model for creep and shrinkage of concrete. This study is made up with predicting model of creep using rheological approach and mathematical development which is solution for phenomenon of concrete creep. Long-term deformation components are combined based on traditional 4-parameters model. Creep deformation is obtained adequately using 4-parameters determined by considering aging effect and microprestress among gels. And coefficient of effective viscosity is able to represent both basic creep and total creep included drying creep. This study attempt to establish mathematical model considering effects of aging, hydration, and variations of pore humidity. It can predict both basic creep and total creep. Values of result between prediction and experiment have greater than correlation factor 99%. Additionally experimental results report bad consentaneity with highway design specification adopting FIB MC 90. Rather than those are similar to FIB MC 90 rev.99.