• 한국농공학회지
• /
• 제37권1호
• /
• pp.81-89
• /
• 1995

The aim of the work described in this paper is to develope a constitutive model for the prediction of an unsaturated Soil and to confirm the application of the model, which is composed of the elastic and plastic part in consideration of the matric suction and the net mean stress. From test results, volume changes and deviator stresses are analyzed at each state and their relationships are formulated. And the application of the model to silty sands is con- firmed by the comparison between test and predicted results. During drying-wetting and loading-unloading processes for isotropic states, the agreement between predicted and test results are satisfactory. And predicted deviator stresses are well agreed with test results in shearing process. Overall acceptable predictions are reproduced in high confining pressure. Usefulness of the model is confirmed for the unsat- urated soil except volumetric strain, which is not well agreed with the test results due to deficiency of dilatancy of the model in low confining pressure. It is, therefore, recom- mended to study the behavior of dilatancy for an unsaturated soil.

• 한국농공학회논문집
• /
• 제57권1호
• /
• pp.79-87
• /
• 2015

A thermochemical equilibrium model was constructed for predicting composition of synthesis gas in biomass gasification. The model included estimation of equilibrium constants using Gibbs free energy. After constructing the model, the results were compared with the experimental values and predictions from a previous model. Gas compositions were reasonably well agreed with them and showed effects of operational and fuel condition. When the reaction temperature increased, the lower heating values decreased due to the decrease in CH4 concentrations. The methane concentrations were lower than those observed in experimental results. The model was used to predict the gas composition and heating values for the cases of mixed fuel of charcoal and un-dry woodchips. Although downdraft gasifiers require fuels less than 15% of moisture contents, the model results indicated that the mixed fuel with charcoal and woodchips which had over 25% of moisture contents could be used in the downdraft gasifiers. It might be explained by increase in energy density resulting from mixing charcoal. The results imply that the efforts and costs for drying biomass fuels could be reduced by mixing charcoal or fuels with higher calorific values.

• Steel and Composite Structures
• /
• 제6권2호
• /
• pp.123-138
• /
• 2006

This paper proposes a model for the analysis of the construction sequences of steel-concrete composite decks in which the slab is cast-in-situ for segments. The model accounts for early age shrinkage, such as thermal and endogenous shrinkage, drying shrinkage, tensile creep effects and the complex sequences of loading due to pouring of the different slab segments. The evolution of the structure is caught by suitably defining the constitutive relationships of the concrete and the steel reinforcements. The numerical solution is obtained by means of a step-by-step procedure and the finite element method. The proposed model is then applied to a composite deck in order to show its potential.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.51-54
• /
• 2013

Rotary kiln reactors are frequently equipped with an axial burner with which solid burden material is directly heated. Lifters are commonly used along the length of the system to lift particulate solids and increase the heat transfer between the solid bed and the combustion gas. The material cascading from the lifters undergoes drying and reacting through direct contact with the gas stream. In this study, volume distribution of materials held within lifters was modeled according to the different lifter configuration and appropriate configuration was used for the design purpose. This was applied to the one-dimensional heat balance model of a counter-current flow reactor, which contributes to the increase of the effective contact surface, and thereby enhances the heat transfer.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.227-232
• /
• 2002

To evaluate the practical application of oyster shells as construction materials, an experimental study was performed. More specifically, the long-term mechanical properties and durability of concrete blended with oyster shells were investigated. Test results indicate that long-term strength of concrete blended with 10% oyster shells is almost identical to that of normal concrete. However, the long-term strength of concrete blended with 20% oyster shells Is appreciably lower than that of normal concrete. 1'hereby, concrete with higher oyster shell has the possibility giving a bad influence on the concrete long-term strength. Elastic modulus of concrete blended with crushed oyster shells decreases as the blending mixture ratio increases. Namely, the modulus is reduced by approximately 10∼15% when oyster shells are blended up to 20% replacing the fine aggregate. The drying shrinkage strain increases as the blending ratio increases. In addition, the existing model code of drying shrinkage does not coincide with the test results of this study. An adequate prediction equation needs to be developed. The utilization of oyster shells as the fine aggregate in concrete has an insignificant effect on freezing and thawing resistance, carbonation and sulfuric acid attack of concrete recycling. However, water permeability is considerably improved.

• Computers and Concrete
• /
• 제5권6호
• /
• pp.573-597
• /
• 2008

Among artificial intelligence-based computational techniques, adaptive neuro-fuzzy inference systems (ANFIS) are particularly suitable for modelling complex systems with known input-output data sets. Such systems can be efficient in modelling non-linear, complex and ambiguous behaviour of cement-based materials undergoing single, dual or multiple damage factors of different forms (chemical, physical and structural). Due to the well-known complexity of sulfate attack on cement-based materials, the current work investigates the use of ANFIS to model the behaviour of a wide range of self-consolidating concrete (SCC) mixture designs under various high-concentration sodium sulfate exposure regimes including full immersion, wetting-drying, partial immersion, freezing-thawing, and cyclic cold-hot conditions with or without sustained flexural loading. Three ANFIS models have been developed to predict the expansion, reduction in elastic dynamic modulus, and starting time of failure of the tested SCC specimens under the various high-concentration sodium sulfate exposure regimes. A fuzzy inference system was also developed to predict the level of aggression of environmental conditions associated with very severe sodium sulfate attack based on temperature, relative humidity and degree of wetting-drying. The results show that predictions of the ANFIS and fuzzy inference systems were rational and accurate, with errors not exceeding 5%. Sensitivity analyses showed that the trends of results given by the models had good agreement with actual experimental results and with thermal, mineralogical and micro-analytical studies.

• 한국도로학회논문집
• /
• 제8권2호
• /
• pp.95-104
• /
• 2006

일반적으로 도로의 하부인 노상층은 불포화토 상태로 존재하기 때문에 함수비의 변동을 예측하기 위해서는 불포화 함수특성곡선(soil-water characteristic curve)의 추정은 필수적이다. 따라서, 국내 대표적인 노상토인 다짐된 화강풍화계열 노상토를 대상으로 함수특성을 정량화하기 위하여 pressure plate 장치를 활용하여 건조 및 습윤 이력과정의 실험을 각각 수행한 후 이를 토대로 불포화토 함수특성에 대한 해석을 수행하였다. 실험결과, 화강 풍화 노상토의 함수비를 좌우하는 흡수력이 건조와 습윤 과정에 있어 서로 다른 수치를 나타내었고 흡수력에 따른 불포화 투수계수와 습윤용적 그리고 확산 등의 흐름특성을 통하여 이력(hysteresis)을 확인하였다. 이를 토대로 도로하부의 연중흡수력을 추정하였다.

• 한국도로학회논문집
• /
• 제11권3호
• /
• pp.75-83
• /
• 2009

안정처리된 도로 지반재료는 현장에서 환경적인 요인으로 인하여 내구성능은 여전히 구조적인 성능과 더불어 평가가 요구되고 있다. 이에 본 논문에서는 국내에서 대표적으로 활용하고 있는 기층과 노상재료를 활용하여 다양한 안정제 종류와 함유량을 달리하여 공시체를 제작하였고 동결-융해 및 습윤-건조하여 여러 조건의 반복재하 회복탄성계수시험을 실시하여 내구성능 및 특성을 파악하였다. 또한 결과에 기초하여 안정처리된 지반재료에 대한 회복탄성계수 예측모델을 살펴보고 모델계수의 범위를 평가후 문헌의 자료와 비교하였다.

• 태양에너지
• /
• 제20권2호
• /
• pp.1-8
• /
• 2000

The present study has been conducted to offer geometrically optimal structure of a storage tank for a regenerator, one of the components of an open-type dehumidifying and drying system using solar energy to develop an alternatives for time-limited energy such as a fossil fuel, and to decrease an environmental pollutant. Two kinds of model classified by the mixing process were suggested to estimate the amount of regeneration rate. One was the stratified-type, "case 1", a method to place an entrance in the upper part of the tank and an outlet in the lower part. The other was the mixed-type, "case 2", a method to place vice versa. Solution temperature and concentration were used to evaluate the regeneration rate. As a result, the regeneration rate was better in "case 2".

• 약학회지
• /
• 제41권1호
• /
• pp.30-37
• /
• 1997

In order to formulate a controlled release system for oral drug delivery, the microcapsules were prepared in w/o emulsion containing cefaclor as a water-soluble model drug by th e method of interfacial polycondensation. Gelatin wis selected as a suitable polymer for interfacial polycondensation. Gelatin solution containing drug was emulsified in an organic phase under mechanical stirring. After emulsification, terephthaloyl chloride was added as cross linking agent, followed by mechanical stirring, washing and drying. Physical characteristics of microcapsules were investigated by optical microscopy, scanning electron microscopy and particle size analysis. Mean particle sizes of gelatin microcapsules were, in the range, of about 20~50 ${\mu}$m. The microcapsules were in good apperance with spherical shapes before washing, but were destroyed partially after washing and drying, even though some microcapsules were still maintained in their shapes. Contents of cefaclor in the microcapsules were calculated by UV spectrophotometry after 3 days extraction with pH 4 carbonate buffer solution. The effects of cross linking time. pH. concentration of cross-linking agent, and temperature on drug release kinetics have been discussed extensively.