• Journal of Life Science
• /
• v.28 no.2
• /
• pp.141-147
• /
• 2018

This study aimed to analyze the contents of rutin, procyanidin B3, quercetin, and kaempferol, known to have antioxidant, anti-inflammatory, and anti-carcinogenic effects, among the polyphenol types contained in grape pruning stem extracts (GPSE). It utilized grape stems discarded after harvest to measure the effects of GPSE on skin moisture, inhibition of skin cell proliferation, and anti-inflammatory activity on the damaged skin of HR-1 mice induced with ultraviolet B (UVB), and to verify the applicability of GPSE as a material for functional food and functional cosmetics. The polyphenol was extracted from grape pruning stems with 80% EtOH, and then the extract was used while storing at $-20^{\circ}C$, after filtering, concentrating, and freeze-drying it. The content of an active ingredient of GPSE was analyzed using high performance liquid chromatography (HPLC). From 53 kg of the grape pruning stem specimen, 2.34 kg of the EtOH fraction extracts were extracted to achieve a 4.42% yield ratio. Analysis of the active ingredients showed 0.28 mg/g of procyanidin B3, 12.81 mg/g of rutin, 0.51 mg/g of quercetin, and 8.24 mg/g of kaempferol. After UVB irradiation on the dermis, to confirm the degree of inhibition of collagen synthesis, we examined the protein expression of MMP-9 using immunohistochemical staining. The results of this study confirm the existence of active polyphenol types, such as rutin, kaempferol, quercetin, and procyanidin B3, in GPSE. Moreover, the study found that GPSE has anti-collagenase effects and it decreases the effects of UV damage on skin barrier function. GPSE is a functional ingredient with a potential for skin protection effects, and it has high utilization potential as an ingredient for functional cosmetics.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• Korean Journal of Food Science and Technology
• /
• v.47 no.1
• /
• pp.95-102
• /
• 2015

The Maillard reaction is a non-enzymatic reaction between amino and carbonyl groups. During milk processing, lactose reacts with milk protein through this reaction. Infant formulas (IFs) are milk-based products processed with heat-treatments, including spray-drying and sterilization. Because IFs contain higher Maillard reaction products (MRPs) than breast milk, formula-fed infants are subject to higher MRP exposure than breast milk-fed ones. In this study, we investigated the optimization of conditions for minimal MRP formation with the addition of $\small{L}$-carnitine ($\small{L}$-car), pyridoxine hydrochloride (PH), and $\small{DL}$-${\alpha}$-tocopheryl acetate (${\alpha}$-T) in an IF model system. MRP formation was monitored by response surface methodology using fluorescence intensity (FI) and 5-hydroxymethylfurfural (HMF) content. The optimal condition for minimizing the formation of MRPs was with $2.3{\mu}M$ $\small{L}$-car, $15.8{\mu}M$ PH, and $20.6{\mu}M$ ${\alpha}$-T. Under this condition, the predicted values were 77.4% FI and 248.7 ppb HMF.

• Journal of Animal Environmental Science
• /
• v.6 no.3
• /
• pp.191-199
• /
• 2000

This study was initiated to investigate the influence of biophysical condition on the composting characteristics, and conducted to develop technology for using recycled compost as a bulking agent cost to reduce operating cost. To methods of aeration, continuous aeration (CA: run No. I) and intermittent aeration (IA: run No. 2) were performed with three 12.3 liter laboratory scale vessels for ten days. Manure and rice hulls were mixed for thirst trial (I), rice hulls and recycled compost after first trial were mixed for second trial (II), dairy manure and only recycled compost after second trial were mixed for third trial (III). During the composting process, temperatures of the compost mass and ammonia emissions were measured. The quality and maturity of compost were ascertained by examining the characteristics and composition of the compost. Also, loss of mass was determined by measuring the mass of materials in the vessels before and after composting. The results in this study are as follows: 1. The periods of optimum temperature ($>55^{\circ}C$) to kill pathogens were maintained from 38 to 78 hours for CA and from 60 to 98 hours for IA. 2. The more recycled compost mixed, the more ammonia emitted. The maximum ammonia emissions were 287 ppm at CA and 420 ppm at IA. 3. Biofiltration system was required for the compo sting system using only recycled compost as an amendment, because the ammonia emissions was produced above 100 ppm at the end of composting process. 4. The quality and maturity of compost: - Fresh compost, were required drying, because moisture contents of the compost were approximately 70% in all tests. - The pH values were observed to rise smoothly, from 7.9 to 8.3 at CA and from 8.4 to 8.6 at IA. The CfN ratios of the fresh compost were ranged form 21.05 to 16.42 for CA and from 22.81 to 14.75 for IA. The final C/N ratios for test II and III were below 20.were below 20.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.309-315
• /
• 2009

Maintenance of adequate soil water content during the period of crop growth is necessary to support optimum plant growth and yields. A better understanding of soil water movement for precision irrigation would allow efficient supply of water to crops, thereby resulting in minimization of water drainage and contamination of ground water. This research reports on the characterization of spatial and temporal variations in water contents through three different textured soils, such as loam, sandy loam, and loamy sand, when water is applied on the soil surface using an one-line drip irrigation system and the soils are dried after the irrigation stops, respectively. Water contents through each soil profile were continuously monitored using three Sentek probes, each consisting of three capacitance sensors at 10, 20, and 30cm depths. Spatial variability in water content for each soil type was strongly influenced by soil textural class. There were big differences in wetting pattern and the rate of downward movement between loam and sandy loam soils, showing that the loam soil had a wider wetting pattern and a slower rate of downward movement than did the sandy loam soil. The wetting pattern in loamy sand soil was not apparent due to a low variability in water content (< 10%) by a lower-water holding capacity as compared to those measured in the loam and sandy loam soils, implying that the rate of water drainage below a depth of 30cm was high. When soils were dried, there were highly exponential relationships between water content and time elapsed after irrigation stops ($r^2$${\geq}$0.98). It was estimated that equilibrium moisture contents for loam, sandy loam, and loamy sand soils would be 17.6%, 6.2%, and 4.2%, respectively.

• Journal of Life Science
• /
• v.18 no.8
• /
• pp.1106-1114
• /
• 2008

The antioxidants activities in water and 95% ethanol extracts of wa-song (Orostachys japonicus A. Berger) dried by sun, hot air and lyophilization were measured in vitro reaction system. In reaction system containing linoleic acid, the antioxidant activities against lipid oxidation enhanced in proportion to storage time. The antioxidant activity of ethanol extracts was higher than that of water extracts. In the drying methods, wa-song extracts showed higher antioxidant activity in the other of hot air-dried, lyophilized and sun-dried. The lipid oxidation system containing the promoting factors, such as $Fe^{+2}$ and $Cu^{+2}$ions, also showed that the ethanol extract of hot air-dried wa-song possessed the highest antioxidant activity. Soybean oil and lard being added with various levels (0.1, 0.5 and 1.0 g/100 g) of the ethanol extract of hot air-dried wa-song were stored at $60^{\circ}C$ (for 28 days) or $180^{\circ}C$ (for 48 hr). Its extract appeared to lower the acid value of soybean oil, wheras it failed to lower the acid value for lard at early storage time, but it was lower than control and BHT after 28 days. Anicidine value and peroxide value were lower soybean and lard added wa-song extract than control and BHT for storage for 28 days at $60^{\circ}C$. In 28 days, its value was significantly decreased in proportion to sample concentration. TBA value was increased during storage time at $60^{\circ}C$, but it was significantly decreased by sample concentration after storage 36 hours at $180^{\circ}C$ storage. Therefore results suggest ethanol extract of hot air-dried wa-song could be potential candidates for natural antioxidants for materials containing lipid.

• Journal of Korean Society of Forest Science
• /
• v.51 no.1
• /
• pp.41-50
• /
• 1981

The purpose of this study was to evaluate the substitutional possibility of new extender instead of wheat flour, which is extending for plywood adhesives in Korea. As the extending materials corn stalk, pine bark, Pitch and Korean pine leaves, wheat, or wood flour were selected and prepared for the extending powders, dried at $103{\pm}2^{\circ}C$ during 24 hours in the drying oven, followed by being pulverized into 60-100 mesh powder. The extenders were mixed with urea formaldehyde resin in the ratio of 5, 10, 15 or 20%. After plywoods were manufactured by the above extended ratios, dry and wet shear strength and wood failures were analyzed and discussed. The results at the study may be summarized as follows ; 1. In urea formaldehyde resin dry shear strength in plywood extended by wheat flour showed the highest value. 2. Among the extenders in 10 and 20% extension of urea formaldehyde resin wet shear strength of wood flour was higher than that of wheat powder. They had no significant difference statistically. 3. Among the extenders of 5% extension of water soluble phenol formaldehyde resin dry shear strength of plywood extended by Korean pine leaf powder showed the highest value, while wheat powder showed the highest value among 10, 15 and 20% extentions. 4. In water soluble phenol formaldehyde resin the best results of wet shear strength showed in wheat powder. 5. Among the extenders in 15 and 20% extension of water soluble phenol formaldehyde resin, dry and wet shear strength in plywood of corn stalk powder were the highest value next to wheat powder.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.3
• /
• pp.397-402
• /
• 2013

The pharmacological efficacy of Protaetia (P.) brevitarsis larvae has been described in the Dongui Bogam. It is believed that the larvae are particularly useful for hepatic disorders. However, natural aversion has made it difficult to consume these larvae as food. Thus, we sought to make an eatable form of the larvae by establishing optimal conditions for larvae preparation. Larvae were selectively bred, sterilized, and a powder of larvae generated by freeze-drying. Afterward, the CellTiter $96^{(R)}$ AQueous Non-Radioactive Cell Proliferation Assay (MTS) with the RAW 264.7 cell line was used to validate the safety of the powder as a food ingredient. We determined that oak sawdust sterilized by water vapor for 5 minutes could be used for larvae feed, and a feeding for 3~5 days followed by a fasting for 3 days were optimal conditions for larvae preparation. In addition, sterilization of larvae at $115^{\circ}C$ and $0.9kgf/cm^3$ (to avoid contamination of pathogenic bacteria and fungi) was successfully applied in the production of edible powder from P. brevitarsis. The optimized processes established in our experiments can be used in the industrial production of P. brevitarsis as a food ingredient.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.1
• /
• pp.62-67
• /
• 2013

This study was carried out to investigate the quality characteristics and antioxidant activities of Rehmanniae radix (Rehmannia glutinosa Libosch. var. purpurea Makino) freeze-dried powder (RRP) and Rehmanniae radix preparata powder (RRPP). Under the Hunter color system, redness was higher and lightness/yellowness lower in RRPP, compared to RRP. The reducing sugar contents of RRP and RRPP were 0.8% and 6.0%, respectively (p<0.05). The pH was lower in the RRPP (RRP: 6.71, RRPP: 4.23). The amount of catalpol amount in RRPP (47.20 mg/mL) was lower than RRP (144.90 mg/mL). RRPP contained high amounts of 5-HMF (5-hydroxymethyl-2-furaldehyde, 47,231 mg/mL), but 5-HMF was not detected in RRP. Total phenol contents of RRP and RRPP were 2.10 mg/mL and 3.66 mg/mL, respectively. FRAP values of RRP and RRPP were 0.51 mg/mL and 1.99 mg/mL, respectively. The antioxidant activities by DPPH (1,1-diphenyl-2-picryl hydrazyl) and hydroxyl radical scavenging activity of RRPP were much higher than RRP. Based on these results, RRPP is a good candidate for food processing in terms for its physicochemical and antioxidative activities.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.35-41
• /
• 2006

This study was conducted to establish the post-harvest management system in rice. Harvested hulled rice was gathered into large-scale bag and combine bag, in which the rice quality and the influence on quality change were investigated on various storage periods and moisture contents. Moisture content of hulled rice ranged from 23.7% to 28.8% on different harvest times, which grew lower as harvesting time was delayed. When desiccation was retarded hulled rice in large scale bag was changed in color and emitted an of offensive odor in 3 days and that in combine bag showed similar symptom in 4 days. Inner temperature in large scale bag was changed a lot when the storage period was prolonged and also the moisture content was higher while that in combine bag increased regularly corresponding to the moisture content at the time of harvest. Moisture content of hulled rice stored in large-scale bag increased 2 days after harvest and the more moisture content showed the more increased tendency, while in the case of combine bag the moisture content was not changed much whether the hulled rice contained low or high moisture content in harvesting. As desiccation was delayed fatty acid increased much more in large-scale bag than in combine bag even though protein and amylose contentwere not changed. As desiccation was delayed more and hulled rice contained moisture more in harvesting head rice ratio of brown rice decreased and green-kerneled rice and damaged grain ratio increased and quality of milled rice also became deteriorated. As a result, desiccation day to minimize the deterioration of rice quality was estimated 1-2 days in large scale bag and 2-3 days in combine bag after harvesting.