• Restorative Dentistry and Endodontics
• /
• 제27권4호
• /
• pp.363-369
• /
• 2002

최근에 많이 사용되어지고 있는 치과용 접착제는 산 부식 후 수분이 있는 상태에서 적용하는 wet-bonding 술식을 많이 추천하고 있다. 하지만 self-etching primer의 경우 산부식과 priming 과정이 동시에 시행되고, 제조자들은 건조된 치아표면에 적용할 것을 추천하고 있다. 그러나 건조된 정도에 대하여서는 별다른 추천사항이 없으며. 수분이 self-etching primer에 어떤 영향을 미치는지에 대하여서는 별다른 연구가 이루어져 있지 않은 상태이다. 이에 본 연구에서는 치질 삭제 후 남아있는 수분이 self-etching primer의 레진 접착 강도에 어떤 영향을 미치는 지를 알아보고자 하였다. 발거한 대구치 96개를 이용하여 물기가 있는 상태에서 #600 사포로 표면을 연마하고, 법랑질 면을 노출시킨 군과 상아질을 노출시킨 군으로 분류 후, 30분 공기 중 방치 군 (1군), 5초 공기 건조 군 (2군), 1초 공기 건조 군 (3군), 솜으로 약간의 물기를 제거한 군(blot dry) (4군) 등 총 8개의 군으로 나누었다. Self-etching adhesive system인 Clearfil SE Bond primer를 20초간 적용하고, bonding제 도포 후 10초간 광중합 시행하였다. 접착제 처리한 치아면에 몰드를 고정한 후 Clearfil AP-X 복합레진을 2mm 충전하고, 40초간 광중합을 시행하였다. 24시간 후 전단 응력 결합강도를 측정하였으며, 그 결과는 다음과 같이 나타났다. 법랑질과 상아질 모두에서, 30분 건조군과 5초 공기건조군이 1초와 blot drying 군보다 높은 결합강도를 보였으며 통계학적으로 유의한 차이를 보였다(p＜0.05). 본 실험 결과에 의하면 self-etching adhesive system을 사용함에 있어서 법랑질과 상아질군 공히 건조된 상태에서 사용하여야 하며 수분의 존재시 치아와의 결합력이 감소하는 것으로 나타났다. 따라서 임상에서 접착제의 적용시 수분의 조절에 주의하여야 할 것으로 사료된다.

• 한국건설순환자원학회논문집
• /
• 제4권3호
• /
• pp.316-321
• /
• 2016

본 연구에서는 박테리아를 흡착한 팽창질석 기반의 친생태 잔디블록의 압축강도 발현과 흡수율 및 생태환경영향 평가를 실시하였다. 경화된 콘크리트의 극건조 환경 및 강알칼리성 환경에서 생장이 가능하며, 식물생장성 증대 효과를 갖는 Bacillus alcalophilus와 Rhodoblastus acidophilus를 $10^9cell/mL$로 배양하여 혼합 사용하였다. 배양이 완료된 박테리아는 생장처 제공을 위한 재료로서 팽창질석에 흡착하였으며, 이를 잔디블록 제조 시 골재의 체적 대비 7.5%와 10% 혼입하였다. 개발된 친생태 잔디블록은 압축강도와 흡수율은 KS 규격을 만족하면서, 수질의 COD 저감, 어류생장 및 식물생장증대에 효과를 보였다.

• 한국작물학회지
• /
• 제36권2호
• /
• pp.160-165
• /
• 1991

경운과 무경운 조건에서 수도를 건답휴립직파 재배할 때 질소시비량이 수도의 생육과 수량성에 미치는 영향을 알기 위하여 직파재배용으로 육성중인 밀양 9005의 건조종자를 6kg/10a 수준으로 1990년 5월 17일에 산파하고, 맥류휴립광산파기로 복토하였다. 경운과 무경운에서 각각 질소를 10, 15, 20, 25kg/10a 수준으로 시용하였으며, 시험결과를 요약하면 다음과 같다. 입묘수와 최고분얼수는 경운에서 무경운보다 더 높은 경향이고, 출수기는 경운에서 2일 늦었으나 현미수량, 수량구성요소, 도복관련형질, 질소흡수량 등은 경운과 무경운간에 차이가 없었다. 질소시비량이 증가할수록 수수의 증가로 현미수량이 증가하였으나, 일수영화수와 등숙율은 차이가 없었으며, 천립중은 질소시비량이 증가할수록 약간 감소하였다. 질소시비량이 증가할수록 지상부길이와 bending moment는 커지고, 좌절중과 간기중이 감소하여 도복지수는 증가하였으나 포장에서 도복은 발생하지 않았다. 간기의 cellulose, hemicellulose, lignin함량은 질소시비량간에 차이가 없었다. 질소시비량이 증가할수록 질소함유율과 흡수량이 증가하였다.

• 한국가금학회지
• /
• 제27권1호
• /
• pp.19-23
• /
• 2000

The effects of microbial phutase on laying performance and phosphorus utilization were examined at different levels of dietary nonphosphorus(NPP) in 320 23-week-old Hy-line brown hens for 12weeks. Diets were formulated 0.275%(T1), 0.220%(T2), 0.165%(T3) of NPP levels, and supplemental microbial phytase was 300DPU/kg diet constantly. Conventional diet(C) was formulated 0.275% NPP level without microbial phytase. Egg production and egg mass were higher in T2 than the others (p<0.05), and average egg weight was higher in T1 than the other (p<0.05). Egg productivity was tended to increase with supplemental phytase compared to conventional diet. Daily feed intake a hen also increased in T2 (p<0.05). Feed conversion ratio was improved slightly without significant difference. Eggshell breaking strength and thickness were not different significantly among the treatments. Haugh unit and yolk color were also not different. Calcium and phosphorus retention in body increased in T2 (p<0.05), but dry matter and nitrogen retention were not different significantly. Differences in nitrogen and calcium excretions were not found among the treatments. But phosphorus excretion decreased in order of dietary phosphorus levels with supplement phytase compared to C (p<0.05). Tibial ash, calcium and phosphorus were similar among the treatments. In conclusion, supplemental microbial phytase in laying diet may help to utilize phytase phosphorus, and could decrease NPP intake.

• Tribology and Lubricants
• /
• 제36권4호
• /
• pp.244-252
• /
• 2020

Materials manufactured by powder metallurgy (PM) are widely used in various applications such as water pump, shock absorber, and airplane components due to the reduction in the cost and weight. In this study, tribological properties of carbon steel subjected by surface treatment were investigated. The main purpose is to increase the strength and improve the tribological properties by reducing pores that formed by PM. Moreover, the surface treatment was carried out at room and high temperatures (RT and HT). The surface roughness of the untreated (NON) and treated (AFTER) samples was measured. It was found that the surface roughness was reduced after both the RT AFTER and HT AFTER compared to RT NON sample. The tribological properties of the samples were performed against bearing steel ball under dry conditions. The friction coefficient of the RT NON samples was reduced by 22% and 56% RT AFTER and HT AFTER, respectively. The wear volume of the RT NON sample was also reduced by 43% and 87% RT AFTER and HT AFTER, respectively. Tribocorrosion tests were also performed and it was found that the surface of the RT AFTER, HT AFTER samples was less corroded compared to RT NON sample. The HT AFTER sample demonstrated a relatively higher corrosion potential in comparison with the RT AFTER samples. Hence, it was confirmed that after surface modification the surface roughness and hardness of the samples were significantly improved resulting in improvement in tribological and tribocorrosion behaviors of PM carbon steel.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.166-166
• /
• 1982

This study has been made to make an observation regarding present status of the coal mine props which is desperately needed for coal production, despite of great shortage of the timber resources in this country, and investigate the effects of diffusion process on the decay resistances of the mine props as applied preservatives of Malenit and chromated zinc chloride. The results are as follows. 1. Present status of the coal mine props Total demand of coal mine props in the year of 1975 was approximately 456 thousand cubic meters. The main species used for mine props are conifer (mainly Pinus densiflora) and hardwood (mainly Quercus). Portions between them are half and half. With non fixed specification, wide varieties of timber in size and form are used. And volume of wood used per ton of coal production shows also wide range from 0.017 cubic meter to 0.03 cubic meter. 2. Decay resistance test a) The oven dry weight decreased between untreated specimen and treated specimen has not shown any significantly, although it has shown some differences in average values between them. It may be caused by the shorter length of the test. b) The strength of compression test between untreated specimen and treated specimen has also shown the same results as shown in case of weight decrease. Reasons assumed are the same. c) The amounts of the extractives in one percent of sodium hydroxide (NaOH) between untreated and treated specimen have shown the large value in case of untreated specimen than that of treated. 3. The economical benifit between untreated and treated wood when applied in field has seen better in long tenn base in case of treated wood, although the primary cost of treated wood add a little bit more cost than that of the untreated wood.

• 펄프종이기술
• /
• 제45권5호
• /
• pp.49-55
• /
• 2013

To explore the paper materials for restoration of the Annals of the Joseon Dyansty, durability of the three type of the traditional Korean Papers were estimated in this study, through moist heat artificial aging test. Three types(D, F, and G) which showed the best preservation performance in dry heat and UV treatment in the previous study were selected and artificial accelerated aging treatment with moist-heat process was conducted; the viscosity change rate was D>G>F; folding endurance G>D>F; $L^*$ value F>D>G; $a^*$ and $b^*$ change rate D>G>F; brightness decrease rate D>G>F, suggesting paper F showed the least change rate in physical/optical properties. Also the CLSM image observation showed fair coherence among fibers and confirmed paper mulberry. And in FDI extraction from each sample, paper F showed the highest value. Overall, paper F (traditional glossy paper) showed the highest stability against thermal treatment. It confirms that paper F is suitable as restoration paper for tributary remains including the annals of the Joseon Dynasty for its steady strength/viscosity decrease rate and color change rate.

• 펄프종이기술
• /
• 제30권4호
• /
• pp.18-27
• /
• 1998

Biopulping is defined as the treatment of wood chips with lignin-degrading fungi prior to pulping. Fungal pretreatment prior to mechanical pulping reduces electrical energy requirements during refining or increases mill throughput, improves paper strength, reduces the pitch content, and reduces the environmental impact of pulping. Our recent work involved scaling up the biopulping process towards the industrial level, investigating both the engineering and economic feasibility. We envision the process to be done in either a chip-pile or silo-based system for which several factors need to be considered: the degree of decontamination, a hospitable environment for the fungus, and the overall process economics. Currently, treatment of the chips with low-pressure steam is sufficient for decontamination and a simple, forced ventilation system maintains the proper temperature, humidity, and moisture conditions, thus promoting uniform growth of the fungus. The pilot-scale trial resulted in the successful treatment of 4 tons of wood chips (dry weight basis) with results comparable to those on a laboratory. Larger, 40-ton trials were also successful, with energy savings and paper properties comparable with the laboratory scale. The overall economics of the process also look very favorable and can result in significant annual savings to the mill. Although the current research has focused on biopulping for mechanical pulping, it is also beneficial for sulfite chemical pulping and some applications to recycled fiber have been investigated.

• Preventive Nutrition and Food Science
• /
• 제15권1호
• /
• pp.57-66
• /
• 2010

Passion fruit fiber pectin gels represent a new alternative pectin source with potential for food and non-food applications on a commercial scale. Pectic polysaccharides were extracted from passion fruit (Passiflora edulis) fiber using citric acid as a clean catalyst and autoclaved for 20 to 60 min at $121^{\circ}C$. The best condition of pectin yield with the highest molecular weight was obtained with 1.0% of citric acid (250 mg/g dry passion fruit fiber pectin) for 20 min of autoclaving. Spectroscopic analyses by Fourier transform infrared, enzymatic degradation reactions, and ion-exchange chromatography assays showed that passion fruit pectin extracted for 20 min was homogeneous high methoxylated pectin (70%). Gel permeation analysis confirmed that the pectin extract obtained by autoclaving by 20 min showed higher molecular weights than those autoclaved for 40 and 60 min. Passion fruit pectin extracted for 20 min was enzymatically modified with fungal pectinmethylesterase to create restructured gels. Short autoclave treatment (20 min) with citric acid as extractant resulted in a significant increase of gel strength, improving pectin extraction in terms of functionality. The treatment of solubilized material (pectic polysaccharides) in the presence of insoluble material (cellulose and hemicellulose) with pectinmethylesterase and calcium led to the creation of a stiffer passion fruit fiber pectin gel, while syneresis was not observed.

• 대한기계학회논문집A
• /
• 제38권10호
• /
• pp.1171-1177
• /
• 2014

전자파차폐용 문세트는 기계적 강도 및 내구성과 전자파 차폐라는 전기적 성능 요구를 동시에 충족시켜야 하므로 이에 알맞은 신뢰성입증시험법의 정립이 요구된다. 특히 전자파 차폐 성능에 직접적인 영향을 미치는 핑거스트립이라고 불리는 베링륨동 재질의 박형 스프링 하위 부품은 문짝과 직접적인 반복 건조마찰이 발생하므로 내구성에 만전을 기해야 하는 부위인데, 산업계에서는 주기적인 보전이 필요한 이 핑거스트립의 교체주기에 대한 보증도 또한 필요한 실정이다. 이러한 요구들에 대응하여 본 연구에서는 전자파차폐용문세트의 시험항목들을 정하고 전체 시스템 수명뿐만 아니라 교체품의 교체주기에 대한 보증을 단순한 방법으로 동시수행하는 입증시험을 설계하였다. 결론적으로 하위 교체부품을 가지는 직렬 시스템의 신뢰성입증시험에서는 교체품의 교체주기에 대한 보증도 항상 함께 포함시킬 것을 제안한다.