• Journal of Environmental Impact Assessment
• /
• v.18 no.6
• /
• pp.331-346
• /
• 2009

The serious problem facing two-dimensional finite element hydraulic model is the treatment of wet and dry areas. This situation is encountered in most practical river and coastal engineering problems, such as flood propagation, dam break analysis and so on. Especially, dry areas result in mathematical complications and require special treatment. The objective of this study is to investigate the wet and dry parameters that have direct relevance to model performance in situations where inundation of initially dry areas occurs. Several numerical simulations were carried out, which examined the performance of the marsh porosity method of RMA-2 model to investigate for application of parameters. Experimental channel with partly dry side slopes, straight channel with irregular geometry and Han river were performed for tests. As a result of this study, effectively applied marsh porosity method provide a reliable results for flow distribution of wet and dry area, it could be further developed to basis for extending to water quality and sediment transport analysis.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.211-211
• /
• 2015

Mekong River is the world's $10^{th}$ longest river and runs through China's Yunnan province, Burma, Thailand, Laos, Cambodia and Vietnam. And Tonle Sap Lake, the largest fresh water body in Southeast Asia and the heart of Mekong River system, covers an area $2,500-3,000Km^2$ in dry season and $10,000-16,000Km^2$ in wet season. As previously noted, the water within Sap river flows from the Mekong River to Tonle Sap Lake in flood season (between June and October) and backward to Mekong River in dry season. Recently the flow regime of Sap River might be significantly affected by the development of large dams in upstream region of Mekong River. This paper aims at basic study about the large scale flood inundation of Cambodia using by CAESAR-Lisflood. CAESAR-Lisflood is a geomorphologic / Landscape evolution model that combines the Lisflood-FP 2d hydrodynamic flow model (Bates et al, 2010) with the CAESAR geomorphic model to simulate flow hydrograph and erosion/deposition in river catchments and reaches over time scales from hours to 1000's of years. This model is based on the simplified full Saint-Venant Equation so that it can simulate the interacted flow of between Mekong River and Tonle Sap Lake especially focusing on the flow direction change of Sap River by season.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.4
• /
• pp.314-322
• /
• 2012

In order to elucidate temporal variations of temperature, salinity, pH, dissolved oxygen (DO), suspended particulate matter (SPM), dissolved inorganic nutrients, and chlorophyll a, we performed 25-hour continuous monitoring in the Seomjin River Estuary in March (dry season) and July (rainy season) 2006. We also investigated spatial variations of marine environmental parameters across a saline gradient. In the Seomjin River Estuary, continuous monitoring results revealed that salinity variations were mainly affected by tidal cycle in the dry season and by river discharge in the rainy season. In the dry season, the spatio-temporal distribution of dissolved inorganic nutrient (nitrate, nitrite, and silicate) concentrations showed a good correlation with tidal cycle. While nutrient concentrations in rainy season showed not much variance in time. There were 6 and 4 times higher dissolved inorganic nitrogen and phosphorus concentrations in the rainy season than those in the dry season, respectively. Silicate concentration was 43 times higher in the rainy season than that in the dry season. Chlorophyll a concentration was higher in the dry season than that in the rainy season showing high nutrient concentrations. The results of this study, spatio-temporal variations of marine environmental factors are determined by both tidal cycle and river discharge. It seems that chlorophyll a concentration is related to the river discharge than dissolved inorganic nutrient distribution.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.5
• /
• pp.15-23
• /
• 2010

Dry sieving, wet sieving and photoscattering analyzer were tested as particle size analyzing methods for sediments from rivers and lakes of Han river, Nakdong river, Youngsan river, and Kumgang river area. Dry sieving showed a big error due to coagulating effect over drying process and this phenomena was severe for lake sediment. Wet sieving and PSA showed an accurate results though wet sieving needs more labor and complicate processes. Freeze-dry or freeze-dry after oxidation of organics with hydrogen peroxide showed improved results but gave lower portion of fine particles in comparing with wet sieving. Heavy metal contents and extractable metal contents were investigated for the sediments and high heavy metal content and extractable amount were obtained from fine particles as expected. Using of proper particle size analyzing method is important and the sediment management should be focused on the fine particles.

• Environmental Analysis Health and Toxicology
• /
• v.16 no.4
• /
• pp.161-170
• /
• 2001

In aqueous ecosystems, the level of toxicity is highly responsive dependant to multiple variables, including rainfall, sunlight, pH, adhesion, etc. Because Korea has particularly distinct wet and dry seasons, the toxicity of pollutants in rivers or streams is dependant on the sampling season and time. In order to examine the effects of rainfall on toxicity, sediment samples were collected from five sites along the Keumho river. It was found that Microtox toxicity levels were generally higher during the dry season than the wet season. It indicated that river pollutants are carried off more quickly by the water during the wet season. As a result, it was recommended that the point sources of pollutants of the Keumho river would be placed between KH3 (Paldalgyo) and KH4(Keumhogyo), KH4(Keumhogyo) and KH5(Dasa).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.624-628
• /
• 2008

Two-dimensional flow analysis is a way to provide good estimates for complex flow features in flow around islands and obstructions, flow at confluence and flow in braided channel. One of difficult problems to develop a two-dimensional hydraulic model is to analyze dry and wet area in river channel. Dry/wet problem can be encountered in river and coastal engineering problems, such as flood propagation, dam break analysis, tidal processes and so on. The objective of this study is to develop an accurate and robust two-dimensional finite element method with dry/wet technique in complex natural rivers. The dry/wet technique with Deforming Grid Method was developed in this study. The Deforming Grid Method was used to construct new mesh by eliminating of dry nodes and elements. The eliminated nodes and elements were decided by considering of the rising/descending velocity of water surface elevation. Several numerical simulations were carried out to examine the performance of the Deforming Grid Method for the purpose of validation and verification of the model in rectangular and trapezoidal channel with partly dry side. The application results of the model were displayed reasonable flow distribution.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6B
• /
• pp.523-529
• /
• 2011

A tidal river is a river affected by tides causing the water level to rise and fall. In the river, the velocity induced by tides at a dry season can be a more dominant factor than that at a flood season in designing hydraulic structures. In this study, flow velocities and water levels were observed in the downstream of Han River at the dry season, and they are used for verification of numerically predicted results. The behaviors of flow were also analyzed by using UNET, a commercial model managing unsteady flows. To estimate the roughness coefficients of the tidal river reach near the Shingok submerged weir, a statistical method is employed. In the method, the discrepancy ratio between the measured and calculated water levels was implemented.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.3
• /
• pp.185-189
• /
• 2011

To predict the deposition characteristic in the Nakdong river estuary, the material budget of Suspended Solid(SS) was investigated with the amount of Nakdong river discharge being set as dry season and flood season. The results of material budged of SS in dry season and flood season were 60,708 kg/day(inflow) and 306,892 kg/day(outflow), respectively.

• Korean Journal of Microbiology
• /
• v.24 no.3
• /
• pp.308-316
• /
• 1986

Vertical distribution of heterotrophic bacteria and physico-chemical characteristics were measuted in Kum River estuarine sediments. And interrelationship between heterotrophic bacterka and environmental factors was also studied. The type of sediment of Site 1 was silty clay, and sand at Site 2. Annual pH ranges were between 7.1 and 7.7 in the clay type sediment (Site 1) and 6.9-7.2 in the sand type sediment (Site 2). It was shown that organic matter contents were higher in the clay type sediment than those of sand type sediment. Redox potential values of sediments were decreased rapidly with depth at Site 1, but those of Sete 2 showed vertical fluctuation. Nitrogens(ammonia+amino acid-N, nitrate-N, nitrite-N) and phosphate in the clay type sediment showed higher values than those of sand type sediment. Annual distribution of heterotrophic bacteria were ranged $6.71{\times}10^4$ cells/g dry wt. $-2.50{\times}10^6$ cells/g dry wt. In the clay type sediment and $2.67{\times}10^3$ cells/g dry wt. $-1.94{\times}10^6$ cells/g dry wt. in the sand type sediment. Distribution of proteolytic, lipolytic, and amylolytic bacteria were decreased with the depth and the highest density was found in April and the lowest in January. Bacterial populations in sediments were closely correlated with such environmental factors as pH, redox potential, moisture content, organic matter contents, and inorganic nutrients such as nitrite-N and phosphate-P.

• Journal of Korea Water Resources Association
• /
• v.33 no.4
• /
• pp.483-493
• /
• 2000

Two dimensional finite element model, RMA, is used to simulate flood inundation phenomena from main channel to floodplain. The marsh porosity method allows finite elements to simulate gradual transition between wet and dry states. The model is applied to prismatic trapezoidal channel to test the applicability of wetting and drying. The floodwave in a river which meanders through a floodplain is also analyzed. The short-circuiting effects, in which the flow leave the meandering main channel and takes a more direct route on the floodplain, are analyzed with various sinuosity factor and roughness coefficients. Finally, the model is applied to the midstream of the Keum River. Wet/dry calculation can simulate the various discharge condition with the same finite element networks.