• Journal of Animal Science and Technology
• /
• 제58권9호
• /
• pp.34.1-34.9
• /
• 2016

Background: By-products of pickled radish (BPR) are considered food waste. Approximately 300 g/kg of the total mass of raw materials becomes BPR. Production of pickled radish has grown continuously and is presently about 40,000 metric tons annually in Korea. The objective of the present study was thus to explore the possibility of using BPR as a ruminant feed ingredient. Results: BPR contained a large amount of moisture (more than 800 g/kg) and ash, and comprised mostly sodium (103 g/kg DM) and chloride (142 g/kg DM). On a dry matter basis, the crude protein (CP) and ether extract (EE) levels in BPR were 75 g/kg and 7 g/kg, respectively. The total digestible nutrient (TDN) level was 527 g/kg and the major portion of digestible nutrients was carbohydrate; 88 % organic matter (OM) was carbohydrate and 65 % of total carbohydrate was soluble or degradable fiber. The coefficient of variation (CV) of nutrient contents among production batches ranged from 4.65 to 33.83 %. The smallest CV was observed in OM, and the largest, in EE. The variation in CP content was relatively small (10.11 %). The storage stability test revealed that storage of BPR at $20^{\circ}C$ (room temperature) might not cause spoilage for 4 d, and possibly longer. If BPR is refrigerated, spoilage can be deferred for 21 d and longer. The in vitro ruminal fermentation study showed that substitution of annual ryegrass straw with BPR improved ruminal fermentation, as evidenced by an increase in VFA concentration, DM degradability, and total gas production. Conclusion: The major portion of nutrients in BPR is soluble or degradable fiber that can be easily fermented in the rumen without adverse effects, to provide energy to ruminant animals. Although its high sodium chloride content needs to be considered when formulating a ration, BPR can be successfully used as a feed ingredient in a ruminant diet, particularly if it is one component of a total mixed ration.

• 청정기술
• /
• 제24권4호
• /
• pp.357-364
• /
• 2018

미세조류 및 거대조류 등 3세대 바이오매스로부터 바이오가스를 생산하는 연구는 다양한 규모의 실험을 통해 수행된 바 있다. 이 논문에서는 3세대 바이오매스 중 거대조류, 즉 해조류 바이오매스로부터 유래된 바이오가스를 이용하는 복합 열병합 발전의 상용화 가능성을 살펴보았다. 이를 위해 고체산화물 연료전지와 가스터빈, 그리고 유기랭킨사이클로 이루어진 산업 스케일의 통합 열병합발전을 상용 공정모사기를 이용하여 설계, 모사하였고, 계산된 열 및 물질수지를 통해 장치의 가격을 추정하고 경제성을 분석하였다. 모사 결과 설계된 열병합발전 공정은 시간당 62.5톤의 건조 갈조류 원료로부터 생산된 36톤의 바이오가스를 이용하여 68.4 MW의 전력을 생산한다. 이 결과를 토대로 다양한 시나리오에 대해 경제적으로 평가하고 균둥화 발전비용(levelized electricity cost, LEC)을 계산하였는데, SOFC의 수명이 5년, 스택 가격이 $$225kW^{-1}$일 때 LEC는 12.26 ¢ $kWh^{-1}$로 기존의 고정 발전과 동등한 수준으로 나타났다.

• 생물환경조절학회지
• /
• 제15권3호
• /
• pp.244-249
• /
• 2006

본 연구는 활엽수 대상 용기묘의 적정 상토를 개발하기 위해 상토의 원료 조성에 따른 노각나무, 찰피나무, 이팝나무 등 활엽수 용기묘의 생장 특성을 4개월간 시설온실에서 실시하였다. 사용된 상토중 코코피드나 피트모스 등이 상대적으로 많은 상토에서 노각나무, 찰피나무, 이팝나무 등 활엽수 용기묘의 수고생장과 근원경 생장이 높게 나타났으며 지상부와 지하부의 건물생산량 또한 뚜렷하게 증가한 경향을 보였다. 또한 생리적 특성에 있어서도 활엽수 용기묘의 광합성률이 상토내 코코피드와 피트모스가 많을수록 높아지는 경향을 보였다. 활엽수 용기묘의 생장에 대한 상토의 영향은 생장특성과 물질생산량 및 광합성과 같은 생리적 특성과 함께 관수 및 시비 체계도 지속적으로 연구해야 할 것이다.

• Asian Journal of Atmospheric Environment
• /
• 제9권2호
• /
• pp.114-127
• /
• 2015

In the Mexico City Metropolitan Area (MCMA), ozone ($O_3$) concentration is still higher than in other urban areas in developed countries. In order to reveal the current state of photochemical air pollution and to provide data for validation of chemical transport models, vertical profiles of meteorological parameters and ozone concentrations were measured by ozonesonde in two field campaigns: the first one, during the change of season from wet to dry-cold (November 2011) and the second during the dry-warm season (March 2012). Unlike previous similar field campaigns, ozonesonde was launched twice daily. The observation data were used to analyze the production and distribution of ozone in the convective boundary layer. The observation days covered a wide range of meteorological conditions, and various profiles were obtained. The evolution of the mixing layer (ML) height was analyzed, revealing that ML evolution was faster during daytime in March 2012 than in November 2011. On a day in November 2011, the early-morning strong wind and the resulting vertical mixing was observed to have brought the high-ozone-concentration air-mass to the ground and caused relatively high surface ozone concentration in the morning. The amount of produced ozone in the MCMA was estimated by taking the difference between the two profiles on each day. In addition to the well-known positive correlation between daily maximum temperature and ozone production, effect of the ML height and wind stagnation was identified for a day in March 2012 when the maximum ground-level ozone concentration was observed during the two field campaigns. The relatively low ventilation coefficient in the morning and the relatively high value in the afternoon on this day implied efficient accumulation of the $O_3$ precursors and rapid production of $O_3$ in the ML.

• 원예과학기술지
• /
• 제31권5호
• /
• pp.531-537
• /
• 2013

최근 30년 동안 우리나라의 평균온도와 겨울철 온도가 각각 $0.7^{\circ}C$와 $1.4^{\circ}C$가 상승하였고 지속적으로 상승할 것으로 예측된다. 무는 매우 중요한 작물로 온난화에 따른 생육 모델 연구는 중요하다. 본 실험은 기상 이변에 따른 무의 생육량을 추정하기 위하여 정식시기와 질소 시비량을 다르게 처리하여 시험하였다. 파종시기는 4월 24일부터 5월 22일까지 14일 간격으로 3회에 걸쳐 실시하였고, 질소 시비량은 표준시비량의 0.5, 1.0, 2.0배 수준으로 3처리를 하였다. 그 결과, 무 파종 후 2개월째 생육은 4월 24일 처리구가 5월 8일과 22일 처리구보다 지상부 생체중이 높게 나왔다. 수확량 예측을 위한 생육 모델식은 질소 시비량별 GDD에 따른 지하부 건물중은 0.5N 처리구에서는 Y = 84.66 / (1+exp (-(GDD - 790.7) / 122.3)) ($r^2$ = 0.92), 1.0N 처리는 Y = 100.6 / (1+exp (-(GDD - 824.8) / 112.8))($r^2$ = 0.92), 2.0N 처리는 Y = 117.7 / (1+exp (-(GDD - 877.7) / 148.5)) ($r^2$ = 0.94) 로 나타낼 수 있었다. 구축된 모델식에 생육데이터를 사용하여 검정한 결과를 보면 기울기가 1.05-1.12로 다소 높게 추정하였지만 모델식으로 적용하는 것에는 무리가 없는 것으로 나타났다. 따라서 봄무 생산량 예측 시 GDD를 사용하여 수확량을 예측할 수 있을 것으로 사료되었다.

• 미생물학회지
• /
• 제37권1호
• /
• pp.92-99
• /
• 2001

Pi1ot plant (200 l)에서의 유가식 배양에 의한 Ralstonia eutopha KHB 8862의 고농도 배 양을 통하여 Poly(3-hydroxybutyrate) (PHB)의 대량생산을 모색하였다. 그 결과 배양 80시간 후 168 g/l의 건체량과 건체량의 74%에 달하는 PHB를 생산할 수 있었으며, 이때의 고과당 시럽으로부터의 PHB 전환수율 및 PHB 생산성은 각각 0.27 (w/w) 및 1.6 $gl^{-1}$ $h^{-1}$ /이었다. 이를 토대로 본 연구에서는 미생물 발효에 의한 PHB 생산 cost 및 그 경제성을 분석하였다. 신규설비투자를 고려하지 않은 경우의 PHB의 생산 cost는 US$2.41/kg으로 산출된 반면에 신규 설비투자를 고려한 경우에는 US$3.15/kg으로 상승되었다. 탄소원의 PHB로의 전환수율과 발효 생산성 모두 PHB 생산비를 결정하는 중요요인이지만 전체 생산비의 37%를 차지하는 탄소원 원료비의 비중이 설비투자의 감가상각비 비중 (17%)에 비해 높기 때문에 생산성을 높이는 노력보다는 전환수율을 개선하는 것이 PHB 생산비용 절감의 핵심이 되는 것으로 나타났다. PHB chip으로의 제조시 PHB 생산 cost는 US$4.0/kg의 수준으로 현재로서는 범용 합성플라스틱에 비하여 경쟁력을 확보하지 못한다. 따라서 생산비 절감을 통한 범용수지로써 경쟁력 제고와 함께 바이오의약 분야 등의 고부가가치 영역에서의 새로운 용도 개발 등이 적극 요구된다.

• 한국약용작물학회지
• /
• 제24권1호
• /
• pp.21-26
• /
• 2016

Background : Acer pictum is a deciduous tree belonging to the family Aceraceae. This study was conducted to collect basic data on mass propagation techniques by surveying the germination and growth characteristics of A. pictum seeds. Methods and Results : A. pictum seeds were harvested in 2014 on August 19, September 5, September 29 and October 31. The seeds were then sown on the same dates they were harvested. A portion of seeds harvested in August 2014 were stored at low temperatures and subsequently sown on March 11, 2015. The germination rate of A. pictum seeds was highest in seeds that were stored harvested on October 31. Mean germination time (MGT) was shortest and germination velocity (Rs) was fastest in seeds harvested on October 31. Root collar diameter, total root length, and dry weight were also highest from seeds collected October 31. Conclusions : A. pictum seeds harvested on October 31 had highest germination and growth rates compared with seeds harvested on earlier dates. It is expected that these results demonstrating optimum harvesting and sowing dates will be applicable to future seedling production for this tree species.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권5호
• /
• pp.550-558
• /
• 1998

The experiment was conducted to evaluate CM (Cell Mass from Lysine Fermentation), which is used to produce synthetic lysine in industry, as an alternative protein source in broiler diets. Three different production conditions were employed to produce CMs (CM I, II, III). Treatments were control, CM I -1 (1 % of CM in the diet), CM I -3 (3% of CM in the diet), CM I -5 (5% of CM in the diet), CM II (3% of CM in the diet), and CM III (3% of CM in the diet). It was found that CM products were all high in crude protein content and especially high in lysine and methionine contents, while very low in minerals. For the starter period, all CM groups showed better weight gain, chicks fed CM I -1 diets were especially high in weight gain (p < 0.05). CM groups consumed 14.4 to 18.0% more feed than chicks fed control diets (p < 0.05). The best FCR was found in CM I -1 groups (p < 0.05), but as CM level was increased, FCR was also increased. For the finisher period, weight gain was similar through all treatments. Through whole experimental period, weight gain and feed intake were higher in all CM groups than control group (p < 0.05), however, as CM level was increased, FCR was also increased. Generally chicks fed CM diets showed higher utilizabilities of gross energy, dry matter, crude protein and crude fat. The best nutrients utilizability was obtained in CM I -1 group, and the worst was found in the control group. During the finisher period, the utilizabilities of crude protein, crude ash and phosphorus were not affected by the dietary treatments. Amino acids utilizability was not significantly affected by the treatments except CM I -5 group. In all amino acids tested, chicks did not show the big difference in utilizabilities. Only in the CM I -5 group, amino acids utilizability was significantly lower than control group. However, among CM I groups, the mean value of the amino acids utilizability was decreased as the level of CM inclusion in the diet was increased. During the finisher period, similar trend was found in amino acids utilizability.

• Journal of Applied Biological Chemistry
• /
• 제64권3호
• /
• pp.217-223
• /
• 2021

광감각제를 이용한 광역학 치료는 필요한 특정 부위에만 빛을 조사하여 치료 효과를 나타내는 부작용이 적은 방법이다. 5-aminolevulinic acid (ALA)는 다양한 생물체에서 합성되는 대표적 광감제로 암진단과 치료를 포함하는 다양한 분야에서 사용되고 있다. 본 연구에서는 다양한 파장의 LED, 유기산 전구체 및 glucose 농도 변화를 통한 Rhodobacter sphaeroides의 최적 성장 조건과 ALA 생산 조건을 확립하기 위한 실험을 진행하였다. 백열등과 동일한 광도 아래에서 Rhodobacter sphaeroides에 850 nm LED 빛을 조사하면 대조군 대비 균주의 성장과 ALA의 생산 농도를 각각 1.5배 및 1.8배 증가시킬 수 있고, 전구체로 pyruvic acid를 첨가한 경우 850 nm 파장의 LED만 조사한 경우 보다 ALA의 생산 농도를 약 2.8배 증가 시켰으며 동일 배양 조건에 40 mM glucose를 첨가하여 배양한 결과 Rhodobacter sphaeroides의 성장은 850 nm 파장의 LED 조사와 pyruvic acid를 첨가한 것에 비해 약 2.9배, ALA의 생산 농도는 약 3.4배 (20 mM) 증가되었다. 건조체 질량당 ALA의 생산은 20 mM과 40 mM glucose에서 대조군 대비 각각 약 1.4배 높은 결과를 나타냈다. 결론적으로 다양한 파장의 LED 중 850 nm 파장의 LED가 Rhodobacter sphaeroides의 성장률 및 ALA의 생산을 최대로 높였으며, 5 mM pyruvic acid와 40 mM glucose의 농도에서 최적의 Rhodobacter sphaeroides 성장과 ALA 생산을 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.164-165
• /
• 2015

Modular construction technique is an adaptation of factory-based mass production concept in ordinary manufacturing industries to construction industry and it assumes that panels, units, etc. are fabricated in factories and assembled in construction sites. Given its structural limitations, modular construction technique is primarily used in low-story buildings whose maximum height is usually five stories, but researchers are actively studying possible adaptation of modular construction technique to high-rise building designs these days as in the case of infill-type modular construction design. Infill-type modular construction technique, most frequently used in high-rise building construction projects, completes frame construction first in reinforced concrete structures and fills unit modules in such structures. However, infill-type modular construction technique leads to longer construction schedule accompanying increase in construction cost, cost overrun due to additional of temporary work, and possible damage to units in the wake of facility construction. Accordingly, this study is performed as a basic study for the development of bottom-up infill-type modular construction technique intended to construct structural frames and fill in units sequentially in a bid to address such drawbacks of current infill-type modular construction technique.