• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.719-724
• /
• 2013

In the case of newly developed stud which has more performance of sound transmission loss, it is expected that sound would transmit through runner than stud. so we developed construction method of runner and stud. As a result, sound transmission loss is improved about 2 dB by using this method. But this construction method could be applied to only newly developed stud. In addition, sound leak of wall joint is about 2 dB, and it could be improved by using rubber gasket at joint.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.194-195
• /
• 2022

The jointing of unsupported concrete on the parking lot floor is a process for cracking and stress relief due to concrete drying shrinkage and restraint, but curling occurs due to long-term drying shrinkage after the initial age. will be lowered Therefore, by using an expansion material and a shrinkage reducing agent, the dry shrinkage of concrete is realized to 200 με or less.

• 항공우주기술
• /
• 제12권1호
• /
• pp.105-110
• /
• 2013

액체로켓엔진 고압 배관의 김발 신축이음은 고압에서 반복적인 회전 변위를 받게 된다. 본 연구에서는 고압에서 내부형 김발 신축이음의 모멘트 해석 및 시험을 수행하였다. 해석적으로 스프링 강성, 마찰과 측력에 의한 모멘트 값을 각각 구하고 시험으로 얻어진 전체 모멘트 값과 비교하였다. 또한 외부형 힌지 신축이음에 대하여 회전 핀에 이황화몰리브덴 코팅을 적용하여 저압에서 갈링 현상이 없어지고 마찰 계수가 감소하는 것을 확인하였다.

• 한국지진공학회논문집
• /
• 제27권3호
• /
• pp.129-137
• /
• 2023

This study presents a dry precast concrete (PC) beam-column connection, and its target seismic performance level is set to be emulative to the reinforced concrete (RC) intermediate moment resisting frame system specified in ACI 318 and ASCE 7. The key features include self-sustaining ability during construction with the dry mechanical splicing method, enabling emulative connection performances and better constructability. Test specimens with code-compliant seismic details were fabricated and tested under reversed cyclic loading, which included a PC beam-column connection specimen with dry connections and an RC control specimen. The test results showed that all the specimens failed in a similar failure mode due to plastic deformations in beam members, while the hysteretic response curve of the PC specimen showed comparable and emulative performances compared to the RC specimen. Seismic performance evaluation was quantitatively addressed, and on this basis, it confirmed that the presented system can fully satisfy all the required performance for the intermediate RC moment resisting frame.

• Composites Research
• /
• 제24권4호
• /
• pp.48-54
• /
• 2011

본 연구에서는 탄소/에폭시 복합재 단일겹침 접착체결부의 염수 수분율이 체결부의 강도 및 파손모드에 미치는 영향을 연구하였다. 시편은 이차접착 방식으로 제작하였고, $71^{\circ}C$, 3.5% 염수환경에서 수분율 0, 0.2, 0.5, 1.0, 2.0%(포화상태)를 갖도록 노출시켰다. 수분율별 시편은 각 8개씩이고, 두 종류의 시험환경을 고려하여 총 80개의 시편에 대한 시험을 수행하였다. 시험결과 복합재 체결부의 강도는 수분율이 2%(포화상태)에 도달하면 감소하지만 그 이전 과도상태(약 1% 근처까지)에서는 오히려 증가하는 것으로 나타났다. 또한 수분율 1%까지는 고온 환경에서의 강도가 상온 강도보다 2~5% 가량 높게 나타났다. 그러나 수분 포화된 고온 환경 체결부의 강도는 상온 강도 대비 약 5% 가량 저하되는 것으로 나타났다.

• 한국항공우주학회지
• /
• 제38권2호
• /
• pp.119-128
• /
• 2010

본 논문에서는 다양한 방법으로 제작된 복합재 접착 체결부의 강도에 대한 온도 및 습도 환경의 영향을 연구하였다. 시편은 두 가지 종류의 일체성형 방법 외에 동시접착 및 이차접착 등 총 네 가지 방법으로 제작하였고, 상온건조, 고온습도 및 저온건조 환경 등 세 가지 환경에서 강도시험을 수행하였다. 전체적으로 고온습도 환경에서의 파손강도가 상온 환경에 비해 11~23% 가량 높게 나타났고, 저온 환경에서의 파손강도는 동시접착 체결부를 제외하고는 8~21% 가량 상온 강도보다 낮게 나타났다. 시험 환경에 따른 체결부의 강도 차이는 환경에 따른 접착제의 물성 변화가 주 원인인 것으로 분석되었다.

• 한국치위생학회지
• /
• 제18권5호
• /
• pp.797-806
• /
• 2018

Objectives: The purpose of this study was to analyze Influence of stress on oral health and quality of life. Methods: The participants were 172 students from 4 universities located in DaeJeon, South Korea. A questionnaire was administered, assessing the impacts of the general characteristics of the participants, temporomandibular joint (TMJ) symptoms, xerostomia, and halitosis on stress. And oral impacts on daily performance were also investigated. Data were analyzed using the Statistical Package for the Social Sciences 18.0. Results: The level of stress was higher in female, and the causes of stress was reported scholastic achievement, relations with professors, get a job. The students who were higher stress were more conscious of TMJ symptoms, xerostomia and halitosis(p<0.05). Stress was significantly positively correlated with TMJ symptoms (r=0.376, p<0.001), dry mouth (r=0.360, p<0.001), and bad breath (r=0.343, p<0.001). Oral Impacts on Daily Performance (OIDP) scores were significantly positively correlated with dry mouth, bad breath, TMJ symptoms, and stress. Regression analysis showed that 54.5% of the independent variables were related to OIDP scores. Stress and TMJ symptoms exerted a significant effect on OIDP scores. Conclusions: Stress among university students affects oral health and quality of life. Stress coping mechanisms and oral health care education programs should be developed and applied at universities.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.12-13
• /
• 2021

Methods for the manufacture, erection, and assembly of heavy frame modules were proposed. Interferences among precast members were prevented by using bolted metal plates for dry precast beam-to-column joints during assembly with a clearance for tolerance implementing grouted concrete filler plates instead of metal filler plates. Clearances for tolerances were provided to avoid conflictions among components during erection phases. These gaps were, then, grouted by high-strength mortar. The constructability of new connections of a beam-to-column joint using bolted metal plates for precast structures was examined using a full-scale assembly test in which practical observations indicated that members could be aligned and placed accurately in both horizontal and vertical directions, leading to a fast and convenient assembling. Bolt holes of the endplate were properly aligned using couplers with 30 mm fastened length embedded in the columns. The assembly test demonstrated the erection safety and structural stability of the proposed joints that were without filler plates when they were subjected to heavy loads at the time of their erection. The facile and rapid assembly of precast beam-to-column connections with a 30 mm tolerance was observed. The proposed assembly method is rapid, sustainable, and resilient, replacing the conventional methods of concrete frame construction, offering a connection that can be used in constructing infrastructure, such as buildings and pipe-rack frames.

• 패션비즈니스
• /
• 제27권5호
• /
• pp.93-107
• /
• 2023

This study aimed to design a knee brace with dry electrode EMS (Electrical Muscle Stimulation) for elite badminton players suffering from knee pain and assess its effectiveness in relieving pain and improving mobility. The assessment measured knee joint range of motion (ROM), Sargent jump height, and pain perception using a visual analog scale (VAS). Four experimental groups were established: stability, pain induction after 100 squats, muscle soreness induction with a regular knee brace, and muscle soreness induction with the EMS knee brace. The most suitable knee brace was selected from four samples to design the EMS knee brace. The conductive fabric was integrated into the inner surface of the knee brace to enhance EMS conductivity for the quadriceps muscles. Tensile strength tests showed that the dry electrode did not significantly affect the physical functionality of the knee brace.Regarding knee joint ROM and Sargent jump height, the EMS knee brace outperformed muscle soreness induction with a regular knee brace and wearing a standard knee brace. VAS measurements demonstrated that the EMS braces effectively alleviated pain perception in most cases. The results indicate the potential for developing EMS braces to alleviate pain and prevent injuries for athletes across various sports.

• Nuclear Engineering and Technology
• /
• 제45권4호
• /
• pp.427-438
• /
• 2013

In this paper we discuss spent fuel management options in the Republic of Korea (ROK) from two interrelated perspectives: Centralized dry cask storage and spent fuel pyroprocessing and burning in sodium fast reactors (SFRs). We argue that the ROK will run out of space for at-reactors spent fuel storage by about the year 2030 and will thus need to transition centralized dry cask storage. Pyroprocessing plant capacity, even if approved and successfully licensed and constructed by that time, will not suffice to handle all the spent fuel discharged annually. Hence centralized dry cask storage will be required even if the pyroprocessing option is successfully developed by 2030. Pyroprocessing is but an enabling technology on the path leading to fissile material recycling and burning in future SFRs. In this regard we discuss two SFR options under development in the U.S.: the Super Prism and the Travelling Wave Reactor (TWR). We note that the U.S. is further along in reactor development than the ROK. The ROK though has acquired more experience, recently in investigating fuel recycling options for SFRs. We thus call for two complementary joint R&D project to be conducted by U.S. and ROK scientists. One leading to the development of a demonstration centralized away-fromreactors spent fuel storage facility. The other involve further R&D on a combined SFR-fuel cycle complex based on the reactor and fuel cycle options discussed in the paper.