• Fashion & Textile Research Journal
• /
• v.3 no.5
• /
• pp.466-472
• /
• 2001

To find a suitable condition in this process examined, we investigated the main control factors, such as, the NaOH concentrations, such as, the NaOH concentrations, the heat treating times, and the heating temperatures. The resulting mechanical properties of the fabrics also studied. The samples used were Nylon/Co-PET sea-island type composite microfiber (Co-PET content: 35%) non-woven fabric. The conclusions obtained were as follows. 1. For the complete extraction of Co-PET from the sample non-woven fabric in the dry hot air process, $160^{\circ}C$ of air temperature, 15 min. of treatment time, and around 30% of NaOH concentration were required. On the other hand, in the wet hot air process, $140^{\circ}C$ of air temperature, 3.5 min. of treatment time, and around 30% of NaOH concentration were required. 2. The mechanical properties of the continuous processed samples showed that the WT, B, and WC increased with increasing the weight reduction ratio. However, the G, decreased with increasing the weight loss ratio. Note that, particularly in B, it increased drastically when the weight deduction ratios exceeded 30%. 3. As increasing the wet hot air temperature from 130 to $140^{\circ}C$, B appeared to increase, however, WT, G, and WC appeared to decrease. 4. The best condition found in this continuous process to extract Co-PET is the wet hot air temperature of 140, NaOH concentration of 28% or above, and the treatment time 2-4 min.

• Korean Journal of Materials Research
• /
• v.22 no.12
• /
• pp.717-721
• /
• 2012

Manganese dioxide ($MnO_2$) is one of the most important cathode materials used in both aqueous and non-aqueous batteries. The $MnO_2$ polymorph that is used for lithium primary batteries is synthesized either by electrolytic (EMD-$MnO_2$) or chemical methods (CMD-$MnO_2$). Commonly, electrolytic manganese dioxide (EMD) is used as a cathode mixture material for dry-cell batteries, such as a alkaline batteries, zinc-carbon batteries, rechargeable alkaline batteries, etc. The characteristics of lithium/manganese-dioxide primary cells fabricated with EMD-$MnO_2$ powders as cathode were compared as a function of the parameters of a manufacturing process. The flexible primary cells were prepared with EMD-$MnO_2$, active carbon, and poly vinylidene fluoride (PVDF) binder (10 wt.%) coated on an Al foil substrate. A cathode sheet with micro-porous showed a higher discharge capacity than a cathode sheet compacted by a press process. As the amount of EMD-$MnO_2$ increased, the electrical conductivity decreased and the electrical capacity increased. The cell subjected to heat-treatment at $200^{\circ}C$ for 1 hr showed a high discharge capacity. The flexible primary cell made using the optimum conditions showed a capacity and an average voltage of 220 mAh/g and 2.8 V, respectively, at $437.5{\mu}A$.

• Journal of Sasang Constitutional Medicine
• /
• v.25 no.4
• /
• pp.384-395
• /
• 2013

Objectives We report a series of 3 chronic tension-type headache cases who were constitutionally typed as the Soeum type, Taeeum type and treated with Dangguibaekhaoguanjung-tang, Chungshimyeonja-tang or Chunghyulganggui-tang. Methods In treating 1 patient who was constitutionally typed as the Soeum type, Case 1 fell into the category of the Taeeum symptomatology, 2 patients who were constitutionally typed as the Taeeum type, Case 2 and Case 3 fell into the category of Dry-Heat symptomatology. Each patient was given Sasang medication according to protocol: Dangguibaekhaoguanjung-tang to Case 1, Chungshimyeonja-tang to Case 2, Chunghyulganggui-tang to Case 3. On admission day and approximately 2 weeks later, patients evaluated their pain and quality of life using SF-36 and HIT-6. The patients symptoms were observed daily and NRS scores were recorded daily. Results and Conclusions 2 Patients(Case1, Case2) showed improvement in their NRS scores, SF-36 scores and HIT-6 scores. 1 patient(Case3) showed improvement in NRS scores, but worse SF-36 scores and no improvement in HIT-6 scores. Treating chronic tension-type headache based on Sasang Constitutional therapy was found to be effective for managing pain. The treatment protocol suggested in this investigation should be explored and verified in future studies.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.4
• /
• pp.534-540
• /
• 2003

This study was conducted to investigate the effect of supplementation of galacto-oligosaccharides (GOS) on methane emission, nutrient digestibility, energy utilization and blood metabolites by Holstein cows fed silages. In two sequential digestion and respiratory trials, two non-lactating Holstein cows were arranged to a balanced incomplete block design. Experimental diets consisted of two silage types; orchardgrass (Dactylis glomerata L.) based silage (OS), mixed silage (orchardgrass based silage and alfalfa (Medicago sativa L.) silage) (MS), while two GOS levels were without supplementation (0) and 2% of dry matter intake supplementation (2). Four combination diets were OS-0, OS-2, MS-0 and MS-2. Significant effects of silage types and GOS supplementation levels were not observed for DM and OM intake. Whereas the digestibility of OM, NDF and ADF was significantly (p<0.05) higher in cows fed OS with and without GOS compared cows fed MS diets. As percentage of GE intake, fecal energy loss for OS diets was significantly (p<0.05) declined than for MS diets. In contrast, cows fed MS diets had lower (p<0.05) urine energy loss as a proportion of GE intake compared to OS diets. Energy loss as CH4 and heat production was numerically increased when cows fed both OS and MS with GOS supplementation. Compared to OS, CH4 emission in cows fed MS was numerically decreased by 10.8 %. Methane conversion ratio (energy loss as CH4 per unit of GE intake) for OS-0, OS-2, MS-0 and MS-2 were 7.1, 7.2, 6.8 and 7.0, respectively. Plasma of glucose and urea-N concentration were significantly (p<0.05) elevated from 1 h to 6 h after feeding, otherwise total protein in plasma was declined (p<0.01) at 6 after feeding.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.4
• /
• pp.681-685
• /
• 1992

Experiment involved range vegetation classified into three major classes: Xerophytic trees, shrubs and grasses. Among them samples of major plant species were collected and analysed for chemical composition. The experimental animals 20 each of Thalli sheep and Teddy goats, located at Livestock Experiment Station Rakh Kharewala district Layyah (Pakistan) were randomly drawn from the main flock. The grazing pattern data were collected from one animal of each species. The observations regarding the grazing behaviour, breeding efficiency and carcass quality were also determined. It was found that overall preference index of Teddy goats were higher for Khabble (Cynodon dactylon) indicated by percent of the total number of bites made on different plant species, while the bites on Lumb (Aristida plumose), Mahabbat booti (Cenchrus biflorus), Dhaman (Cenchrus ciliaris) and Karera (Elionorus hirsutus) were found to be 1.28, 6.74, 0.32 and 3.87 percents. The browsing species as a whole were utilized more during the draught period. Among the grasses, sheep heavily utilized Khabble grass, with overall bite percentage of 89.27. Within browsing species Wan (Salvadora oleoides) and wind fallen dry leaves of Wan were considerably picked by the sheep showing 1.19 and 3.49 overall bite percentage respectively. The overall daily growth rates & dressing percentage for Teddy goats and Thalli sheep were 48.33, 39.00 and 51.00, 46.00 percent respectively. Moreover, among the experimental animals 50 percent goats exhibited signs of oestrus where as none of the sheep came into heat during the study period.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.4
• /
• pp.555-560
• /
• 2008

The effects of utilizing evaporative cooling system equipped with tunnel ventilation on postpartum ovarian activities, energy balance and milk production of early lactating dairy cows under hot and humid climates were studied from parturition to 22 wk postpartum. Thirty-four crossbred Holstein-Friesian (93.75% HF$\times$.25% Bos indicus) primiparous cows were randomly assigned to one of two groups. Cooled cows (n = 17; treatment) were housed in the tunnel ventilated barn equipped with evaporative cooling system and uncooled (n = 17; control) were housed in the naturally ventilated barn without supplemental cooling system. Cooled cows had greater (p<0.05) dry matter intake and milk production than uncooled cows. Days to the energy balance (EB) nadir did not differ between groups. However, days to equilibrium EB for uncooled cows was longer (p<0.05) than for cooled cows. There was no significant difference in postpartum anovular condition between cooled and uncooled cows. The interval from parturition to first postpartum ovulation did not differ between groups ($31.4{\pm}4.3$ and $26.1{\pm}3.6$ day, respectively). These results suggest that the evaporative cooling and tunnel ventilation has the potential to decrease the severity of heat stress and improve both milk production and metabolic efficiency during early lactation without affecting reproductive function in dairy cows under hot and humid climates.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.11
• /
• pp.1623-1631
• /
• 2006

The objective of this study was to evaluate the effect of protein and energy on goats fed oil palm fronds (OPF) as roughages. Twenty-four male Saanen goats aged between 7 and 8 months and weighing $23.4{\pm}1.6kg$ were used in a $2{\times}3$ factorial design. Factors were three levels of urea (3%, 4% or 5%) and two levels of energy (low energy (LE) or high energy (HE)). On average, all parameters measured, including dry matter intake (DMI), nutrient digestibility, digestible nutrient intakes, ruminal ammonia-N ($NH_3$-N), ruminal total volatile fatty acid (total VFA) and individual VFA concentrations (mM/L), microbial N supply, P/E ratio and N retention were higher for HE compared to LE diets. Significant (p<0.05) interactions were found between levels of urea and energy for nonstructural carbohydrate (NSC) and energy (DE) digestibilities, ruminal $NH_3$-N and total VFA concentrations. HE diets had higher N absorption and retention than LE diets. Interactions between urea and energy for plasma urea nitrogen (PUN), heat production (HP), and urine and faeces N excretion were significantly lower (p<0.05) for the HE diets than those recorded for the LE diets. The results indicated that supplementation of energy enhanced utilization of urea and resulted in higher animal performance as a consequence of improved ruminal fermentation, microbial yield and N balance. However, the optimal level of urea supplementation remained at 3% in the HE diet.

• Korean Journal of Human Ecology
• /
• v.19 no.1
• /
• pp.191-201
• /
• 2010

This study attempted to examine the application of retrograded starch (RS3) isolated from rice flour into Madeleine which is easy to make, supply enough energy and micro nutrients with adequate drinks, and prevent an adult disease. This could be a popular food to anyone regardless of age and gender who avoid rice and become high value-added, processed rice foods. For this, control Madeleine was made from wheat flour and an experimental one was made from 5 or 10% rice RS3 addition as well as wheat flour. Four different types of rice were produced from Premium Ho-Pyong Rice, that is, dry milled rice flour(RFD), soaked for 8 hours and milled, followed by air-dried rice flour(RFW), rice starch(RST), and retrograded rice starch or enzyme-resistant starch(RS3). The results found were as follows: Proximate compositions were decreased with soaking to make RFW, RST and RS3, compared to RFD. RS3 had the highest L, +a and ${\Delta}E$ with the lowest +b, changing it to a dark color, explaining the need for heat control during processing. At $80^{\circ}C$, the swelling power was shown in the order of RST>RFW>RFD>RS3 and the solubility of RS3 was the highest. There were significant differences in viscosities of peak, trough, cold, breakdown and total setback of all rice samples using RVA (p<0.001). Due to the pH of RS3, the Madeleine batter became acidic (p<.01) and expanded, resulting in more air cells and open texture. With an increasing RS3 level in Madeleine, several textural attributes among 'fresh' and 'stored at room temperature' Madeleine samples were significantly different by using Texture Analyzer. While the addition of RS3 in Madeleine did not significantly affect the sensory evaluation, indicating RS3 isolated from rice as a beneficial ingredient for processed rice products.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.2
• /
• pp.142-153
• /
• 2004

Statement of problem: Increasing demand of esthetic restorations made lots of kinds of ceramic materials. Among them, zirconia has been being focused by many dentists. But, mechanical properties of zirconia were still unclear. Purpose : The purposes of this study were to analyze the flexural strength of various zirconia ceramics which had been currently used for clinic i.e., In-Ceram Zirconia(Vita Zahnfabrik, Bad $S\"{a}ckingen$, Germany), Celay Zirconia(Vita Zahnfabrik, Bad $S\"{a}ckingen$, Germany) and CAD/CAM Zirconia (Adens Zi-Ceram. Seoul , Korea). Material and methods: The four point bending test(ASTM Cl161) was used to measure the flexural strength of a specimen before and after circular heat treatment and fatigue loading. Results : 1. The average value of flexural strengths of CAD/CAM Zirconia, Celay Zirconia, In-Ceram Zirconia in dry condition were 806.5 MPa, 669.9 MPa, 605.6 MPa, respectively. There was a statistically significant difference in strength among the types (P<0.05). 2. After thermocycling, the average flexural strengths of CAD/CAM Zirconia, Celay Zirconia, In-Ceram Zirconia were 791.2 MPa, 604.2 MPa, 605.4 MPa, respectively. CAD/CAM Zirconia showed statistically significant higher strength(P<0.05). The others showed no significant difference after thermocycling(P>0.05). 3. After fatigue loading in wet condition. the average flexural strengths of CAD/CAM Zirconia, Celay Zirconia, In-Ceram Zirconia were 806.0 MPa, 674.9 MPa, 601.7 MPa, respectively. There was a significant difference in strength among the types(P<0.05). 4. There was no statistically significant difference in strength of the specimens according to experimental methods except for before and after thermocycling in Celay Zirconia(P>0.05). Conclusion: Besides high esthetic quality, zirconia had sufficiently high mechanical strength.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.4
• /
• pp.65-71
• /
• 2009

Hydraulic fracturing technology has been widely applied in the industry for the recovery of the natural resources such as gas, oil and geothermal heat from hot dry rock. During hydraulic fracturing stimulation, multiple cracks are created resulting in mechanical interaction between cracks. Such an interaction influences obtaining hydraulic fracturing key parameters (crack opening, length, and borehole net pressure). The boundary collocation method (BCM) has been proved to be very effective in considering mechanical interaction. However, for better confidence, it needs to be verified by comparison with analytical solutions such as stress intensity factors. In this paper, three cases, single fracture in remote uniaxial tension, single fracture in remote shear stress field and two arbitrary segments in an infinite plane loaded at infinity are considered. As a result, the BCM is proved to be valid technique to consider mechanical interaction between cracks and can be used to estimate the hydraulic fracturing parameters such as opening of the fracture, and so on.