• Korean Journal of Acupuncture
• /
• v.30 no.3
• /
• pp.171-177
• /
• 2013

Objectives : The purpose of this study is to investigate the mechanism of Cosmetic Acupuncture through reinterpretation of anatomy and physiology. Methods : The causes of wrinkle increases and rapid aging of facial skin were studied and the theoretical system of Cosmetic Acupuncture treatment was analyzed through anatomy and physiology reinterpretation. Results and Conclusions : An increase in wrinkles and rapid aging of facial skin is caused by xerosis. Skin condition represents the condition of subcutaneous muscle. The reason why skin becomes easily dry is the heat produced by craniofacial part. Craniofacial part always generates lot of physiological fever because of the muscles. This physiological fever is produced from the muscles that are responsible for maintaining skull suture, controlling the movement of temporomandibular joint, maintaining head and neck posture. Controlling this fever is the crux of Cosmetic Acupuncture mechanism. These muscles correspond to Foot Taeyang meridian-muscle, Foot Soyang meridian-muscle and Foot Yangmyung meridian-muscle. Cosmetic Acupuncture is effective for preventing facial skin from aging and wrinkle increase by mechanical stimulus on facial muscles, and for controlling craniofacial part meridian-muscle system producing the heat.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.13 no.2
• /
• pp.107-118
• /
• 2005

An experimental investigation was made to study two-phase flow distribution in a T-type distributor of slit fin-and-tube heat exchanger using R-22. Experiments were carried out under the conditions of saturation temperature of $5^{\circ}C$ and mass flow rate varying from 0.6 to 1.2kg/min. The inlet air has dry bulb temperature of $27^{\circ}C$, relative humidity of 50% and air velocity varying from 0.63 to 1.71m/s. A comparison was made between the predictions from the previously proposed tube-by-tube method and the present experimental data for the heat transfer rate of evaporator. Results show that $82.5\%$ increase of air velocity is needed for T-type distributor with four outlet branches than that of two outlet branches under the superheat of $5^{\circ}C$, which resulted in increasing of air-side pressure drop of $130\%$ for the former as compared to the latter.

• Journal of the Korean Society of Tobacco Science
• /
• v.18 no.2
• /
• pp.120-125
• /
• 1996

Dried tobacco leaf debris infected with tobacco mosaic virus (TMV) was subjected to heat treatment (6$0^{\circ}C$~10$0^{\circ}C$) with or without addition of moisture and to room temperature for natural decay to examine the periods of time required for the inactivation of PMV in the inoculum source. Wet conditions (60% moisture content of the debris) for heat treatment were more efficient than dry conditions to inactivate the virus at 7$0^{\circ}C$~10$0^{\circ}C$, and which decrease of temperature, the time needed for the viral inactivation increased greatly. At 6$0^{\circ}C$ and 7$0^{\circ}C$, the temperaturein a compost heap during the actively decomposing period, it takes about 15 days or more for the complete inactivation of the virus. However, considering the decrease of the viral infectivity during the decomposition, a shorter period of time will be required to inactivate TMV in the conditions mentioned above, suggesting that a well decomposed organic manure containing tobacco leaf debris may not have infective TMV and may not provide a potential inoculum source.

• Korean journal of food and cookery science
• /
• v.7 no.3
• /
• pp.1-6
• /
• 1991

Potato starches are obtained from Irish Cobbler (the dry type), Shepody and superior (the intermediate type) and Dejima (the moist type). Rheological properties of heat-gelatinized potato starch paste were studied to elucidate difference of various potato starches. Heat-gelatinized 3 to 7% potato starch paste showed pseudo plasticity in yield stress. As starch paste concentration increased, the values of consistency index was increased. Relationship between logarithmic consistency index and concentration of potato starch paste was linear at 5% starch concentration. Concentration dependence of consistency index and yield stress of Shepody was highest. As measuring temperature increased, the value of consistency index was decreased. Irish Cobbler starch paste at $50^{\circ}C$, Shepody, Superior and Dejima starch paste at $60^{\circ}C$ showed linear relationships with different slopes. The activation energies of Shepody starch paste was 3.97㎉l/㏖.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.6
• /
• pp.896-902
• /
• 2009

EGR is applied in order to lower temperature of combustion chamber by using the specific heat of carbon dioxide in engine exhaust gas. However, the problem of EGR system in diesel engine is high PM concentration. Combined EGR system can be reduced it by mixing exhaust gas of gas engine into the intake air of diesel engine. This experimental study was designed for EGR system for both engines use. The results of EGR experimental study by using diesel engine and gas engine are as follows. 1) The pressure of combustion and rate of heat release decreased. 2) The specific fuel consumption increased. But, up to middle load, it little increased. 3) NO concentration has decreased up to 50% in almost all combustion area. 4) The variation of the PM concentration at low load is not so seen. But at high load, PM increased rapidly when concentration of oxygen is decreased and most of it caused the increasing of Dry Soot.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.2
• /
• pp.20-26
• /
• 2013

This study focused on how it affects the surface roughness of work piece in cutting SCM415 steel, widely used steel in industry, by TiCN and TiN tools. Following conclusion was drawn from several experiments. The surface roughness of heat treated workpiece was better than that of non heat-treated materials. Moreover, the roughness of surface roughness(Ra 0.25) on feeding rate of 0.05 was better when it was in wet process, rather than dry process. As the feeding rate increases, TiCN coating tool shows better roughness of surface than TiN tool. Also, in heated treatment, TiCN coating tool shows the least straightness dimension deviation at feeding rate of 0.05, 0.15mm/rev, and concave-like R shape appears by the feeding rate orders of 0.05, 0.15, 0.1, 0.125 and 0.075mm/rev.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.2
• /
• pp.137-148
• /
• 1995

The nitridation kinetics of titanium powder were studied by isothermal and non-isothermal (dynamic) methods in high purity nitrogen under I atm pressure. For the comparison with nitridation, the oxidation kinetics of titanium powder were also studied in dry oxygen at I atm pressure. An automatic recording electrobalance was used to measure the weight gain as a function of time and temperature. For the reaction with nitrogen, the nitride was formed at over $700^{\circ}C$. The reaction with nitrogen followed the parabolic rate law, and the activation energy was calculated to be 31 kcal/mol in the isothermal method (above $900^{\circ}C$). The non-stoichiometric TiNx has been synthesized by the nitridation at a proper temperature and time, followed by the homogenizing treatment above $1100^{\circ}C$. In comparison with the stoichiometric $TiN_{1.0}$ and the non-stoichiometric TiNx ($TiN_{0.5}$ and $TiN_{0.65}$), the hot oxidation characteristics of the former is superior to that of the latter. However, both non-stoichiometric nitrides make little difference in the hot oxidation characteristics.

• Journal of Sasang Constitutional Medicine
• /
• v.20 no.3
• /
• pp.40-50
• /
• 2008

1. Objectives We analyze throat disease focused on Sasang constitutional medicine and find out throat disease's concept, pathology and medical treatment. 2. Methods We consider term, conceuption, symptoms, mechanism and medical treatment of throat disease in "Dongyisusebowon", "Dongyisusebowon Gabogubon", "Dongyisusebowon sasangchobongwon", "Dongyisasangshinpyun" and "Dongmuyoogo" 3. Results and conclusions 1) We find out throat disease's some concept that are refered variety in sasang constitutional medicine. 2) Throat disease's pathology are different according to sasang constitution. In Soeumin throat disease belong to taeeum syndrome and soeum syndrome, in Soyangin throat disease belong to chest heat syndrome, in Taeumin throat disease belong to dry heat syndrome, in Taeyangin throat disease belong to Yul gyuk syndrome 3) In sasang constitutional medicine, medical treatment of throat disease focus on not throat disease but human being and medical treatment of throat disease are almost internal treatment but in Soyangin and Taeumin, medical treatment of throat disease are external treatment.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4005-4012
• /
• 2022

As high-level radioactive waste (HLW) generated from nuclear power plants is harmful to the human body, it must be safely disposed of by an engineered barrier system consisting of disposal canisters and buffer and backfill materials. A gap exists between the canister and buffer material in a HLW repository and between the buffer material and natural rock-this gap may reduce the water-blocking ability and heat transfer efficiency of the engineered barrier materials. Herein, the basic characteristics and thermal properties of granular bentonite, a candidate gap-filling material, were investigated, and their effects on the temperature change of the buffer material were analyzed numerically. Heat transfer by air conduction and convection in the gap were considered simultaneously. Moreover, by applying the Korean reference disposal system, changes in the properties of the buffer material were derived, and the basic design of the engineered barrier system was presented according to the gap filling material (GFM). The findings showed that a GFM with high initial thermal conductivity must be filled in the space between the buffer material and rock. Moreover, the target dry density of the buffer material varied according to the initial wet density, specific gravity, and water content values of the GFM.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.17-25
• /
• 2017

To resolve the problem of the temperature rise in LED or OLED lighting, until now a thick metal film has been used as a heat-sink. Conventionally, this thick metal film is made by the electroplating method and used as the heat-dissipating plate of the electronic devices. However, nowadays there is increasing need for a Cu metal film with a thickness of several hundred micrometers that can be formed by the dry deposition method. In this work, we designed and fabricated a Cu film deposition system where the heating element is separated from the ceramic crucible, which makes ultra-rapid deposition possible by preventing heat loss. In addition, the resulting induction heating also contributes to the high deposition rate. By tuning the various parameters, we obtained a $100-{\mu}m$ thick Cu film whose heat conductivity is high and whose thickness uniformity is better than 2%, while the deposition rate is as high as $1000{\AA}/s$.