References
- Tae, S. J. and Cho, K., 2002, Two-phase flow characteristics of refrigerant in T-branch with horizontal and vertical inlet tube, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 14, No. 9, pp. 741-748
- Kim, C. D., Jeon, C. D. and Lee, J., 2003, Effects of the temperature glide and superheat of R407C on the performance of evaporator, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 15, No. 10, pp. 852-859
- Kim, J. S., 1993, Two phase flow distribution in multi-parallel evaporator tubes (1st report: Non-heating mode), Refrigeration-Air Conditioning Engineering, Vol. 12, No. 1, pp. 1-20
- Park, J. H., Cho, K. and Cho, H. G., 1999, Characteristics two-phase flow distribution and pressure drop in a horizontal T-type evaporator tube, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 11, No. 5, pp. 658-668
- Domanski, P. A., 1989, EVSIM-An Evaporator Simulation Model Accounting for Refrigerant and One Dimensional Air Distribution, NISTIR 89-4133
- Youn, B., Park, H. Y. and Kim, C. H., 1998, Analytical model of dry surface cross-flow fin-tube heat exchanger by tube-by-tube method, Proceedings of the SAREK '98 Summer Annual Conference, pp. 1399-1404
- Lee, J. H., Kwon Y. C. and Kim M. H., 2003, An improved method for analyzing a fin and tube evaporator containing a zeotropic mixture refrigerant with air mai-distribution, International Journal of Refrigeration, Vol. 26, pp. 707-720 https://doi.org/10.1016/S0140-7007(03)00023-9
- ASHRAE, 1993, Fundamental Handbook (SI)
- McLinden, M. O., Klein, S. A., Lemmon, E. W. and Peskin, A. P., 1998, Thermodynamic and transport properties of refrigerants and refrigerant mixtures database (REFPROP), Ver. 6.01, NIST
- Gungor, K. E. and Winterton, R. H. S., 1986, A general correlation for flow boiling in tubes and annuli, International Journal of Heat and Mass Transfer, Vol. 19, No. 3, pp. 351-358
- Wang, C. C., Chiou, C. C. and Lu, D. C., 1996, Single-phase heat transfer and flow friction correlation for micro fin tubes, International Journal of Heat and Fluid Flow, Vol. 17, pp. 500-508 https://doi.org/10.1016/0142-727X(96)00048-3
- Schlager, L. M., Pate, M. B. and Bergles, A. E., 1990, Performance predictions of refrigerant oil mixtures in smooth and internally finned tube, II, design equations, ASHRAE Transaction, Vol. 96, pp, 170-182
- Haraguchi, H., Koyama, S., Esaki, J. and Fujii, T., 1993, Condensation heat transfer of refrigerants HFC134a, HCFC123 and HCFC22 in horizontal smooth tube and a horizontal microfin tube, Proc., 30th National Symposia of Japan, Yokohama, pp. 343-345
- Carnavos, T. C., 1980, Heat transfer performance of internally finned tube, Heat Transfer Engineering, Vol. 4, p. 32
- Geary, F. D., 1975, Return bend pressure drop in refrigeration system, ASHHAE Transactions, No. 2342, pp. 252-265
- Ito, H,. 1960, Pressure loses in smooth pipe bends, Basic Engineering, Transaction of ASME, Vol. 3, p. 135
- Schlager, L. M., Pate, M. B. and Bergles, A E., 1989, Heat transfer and pressure drop during evaporation and condensation of R22 in horizontal micro-fin tubes, International Journal of Refrigeration, Vol. 12, pp. 6-14
- Wang, C. C., Tao, W. H. and Chang, C. J, 1999, An investigation of the airside performance of the slit fin-and-tube heat exchangers, International Journal of Refrigeration, Vol. 22, pp, 595-603 https://doi.org/10.1016/S0140-7007(99)00031-6
- McQuiston, F. C. and Parker, J. D., 1994, Heating, Ventilating, and Air Conditioning Analysis and Design, John Wiley & Sons, pp. 543-547
- Natio, N., 1970, SHASE Transactions (The Society of Heating, Air-conditioning and Sanitary Engineers of Japan), Vol. 44, pp. 1-5
- Kline, S. J. and McClintock, F. A., 1953, Describing uncertainty in single sample experiments, Mechanical Engineering, Vol. 75, pp. 3-8