• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표회 논문집(I)
• /
• pp.145-150
• /
• 1998

This study deals with the effect on performance of epoxy resign mortar mixed special cement for surface control and maintenance of aging concrete construction. The test of main property of epoxy resign in this study are the evaluation on the adhesive strength between substrate and epoxy resign mortar under the environment of wet or concrete substrate surface. We gained the test results of good adhesive strength over 15 kgf/$\textrm{cm}^2$ under the wet and dry condition of concrete surface.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.517-518
• /
• 2012

• 접착 및 계면
• /
• 제3권2호
• /
• pp.40-44
• /
• 2002

본 실험에서는 고무-황동 도금 스틸 코드 복합체의 접착성에 미치는 미가류 복합체의 방치 기간과 가류 복합체의 열노화의 영향을 검토하였다. 또한 이런 방치 조건에 따른 접착력 변화가 타이어 내구력에 어떤 영향을 미치는지를 평가하였다. PAD 접착 시편을 사용하여 박리 접착 강도를 측정하였다. 미가류 복합체의 방치 기간은 공장 조건에서 최대 35일이고 가류 복합체의 열노화는 $85^{\circ}C$ 항온조에서 5, 10일간 실시하였다. 박리 접착 강도는 방치일수가 길수록 하락하는 경향을 보였다. 또한 열노화 기간이 길수록 그 값은 낮았다. 박리 접착 강도가 낮을수록 타이어 내구력도 낮았고, 그 주된 원인이 수분과 열에 의한 노화가 고무와 스틸 코드의 접착력을 하락시켜 코드와 고무의 계면에서 파괴가 일어났기 때문이라는 것을 SEM관찰과 내구력 평가로 확인할 수 있었다. 즉, 스틸 코드 표면의 부식이나 접착증의 노화가 접착강도 하락에 크게 영향을 미치고 그 결과 타이어의 내구력 하락에도 직접적인 영향을 미친다는 것을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제39권11호
• /
• pp.1099-1103
• /
• 2015

자연계에 존재하는 다양한 생명체 중 몇몇은 벽이나 천장을 자유자재로 걸어다닌다. 이러한 생명체 중 대표적으로 Gecko는 발가락 표피에 수십억개의 주걱모양의 나노헤어를 가지고 있으며, 이러한 구조로 인하여 높은 접착력을 가진다. 본 연구에서는, 도마뱀 발바닥 섬모와 같은 미세 마이크로 구조물에 금속코팅을 하여 접착특성을 향상시키는 것을 제안한다. 도마뱀 모방 인공섬모 구조물을 DRIE공법으로 준비된 몰드를 이용하여 PDMS로 제조하였다. 그리고, 인공섬모의 금속 코팅은 플라즈마 스퍼터링을 사용하여 수행하였다. 접착력과 내구성은 실험을 유리에 반복 접착 실험으로 평가 하였다. 접착성 및 내구성 실험을 통하여 인공섬모 구조물에 금속코팅이 미치는 영향에 대해 관찰하였다.

• Restorative Dentistry and Endodontics
• /
• 제29권2호
• /
• pp.153-161
• /
• 2004

This study investigated that the effect of rewetting agent on dentinal microtensile bond strength(${\mu}TBS$). Human molars were sectioned to expose the superficial dentin surfaces. Samples were divided into two groups according to type of adhesives-Single Bond (S) and One-Step (0)], and again subdivided into five groups by different dentin surface treatment-dry for 15s (D), blot dry (BD) or dry for 15s, and rewet with different rewetting agents [distilled water (DW), Gluma Desensitizer (GD) and Aqua-Prep (AP)] for 30s. After application of adhesive, composite resin was built up on the bonding surface. Each tooth was sectioned to obtain stick with $1\textrm{mm}^2$ cross sectional area and the ${\mu}TBS$ was determined by EZ test. In the S group, the mean ${\mu}TBS$ of GD, AP, and BD group was significantly higher than that of DW and D group (p < 0.05), In the O group, the mean, ${\mu}TBS$ of AP, GD, BD and DW group was significantly higher than that of D group (p < 0.05). The data suggested that Gluma Desensitizer and Aqua-Prep could be successfully used as rewetting agents, and Distilled water could be acceptable in aceton based adhesive system only.

• Journal of the Korean Wood Science and Technology
• /
• 제14권2호
• /
• pp.29-35
• /
• 1986

This study was carried out to examine the effect of aluminium sulfate addition to the alkali-acid catalyst phenolic resin for the manufacture of the kapur (Dryobalanops spp.) plywood on the reduction of phenolic resin spreading. On the manufacture of plywood, Adhesive Contents such as 50g/$m^2$, 75g/$m^2$ and 150g/$m^2$ were treated. The spreading adhesive content of 50g/$m^2$ and 75g/$m^2$ had been controlled to about 150g/$m^2$ added with the water in order to get sufficient spreading and controlled to pH 4.5 with aluminium sulfate [$Al_2(SO_4)_3$]. The results are summarized as follows: 1. Specific gravities of air dried plywood manufactured from each adhesive ranged from 0.77 to 0.86 and their moisture contents met the KS requirements. 2. In dry and wet shear strengths, 150 $P_{Al{\cdot}Ac}$ adhesive showed the highest and 75 $P_{Al{\cdot}Ac{\cdot}Am}$ adhesive indicated higher value than 150 $P_{Al{\cdot}Ac}$ adhesive. 3. In case of glue shear strength after boiling test, 150 $P_{Al{\cdot}Ac}$ adhesive was the best and adding of aluminium sulfate was not effective on reinforcement of boiling water resistance of phenolic resin, but met KS requirements. 4. 75 $P_{Al{\cdot}Ac{\cdot}Am}$ adhesive showed the good shear strength and met KS requirements. Therefore, adding of aluminium sulfate was very efficient for economical plywood manufacture.

• Tribology and Lubricants
• /
• 제26권2호
• /
• pp.129-135
• /
• 2010

Geckos have a unique ability to cling to ceilings and walls utilizing dry adhesion. Their foot pads are covered by a large number of small hairs (setae) that contain many branches per seta with a lower level of spatulae. Their fibrillar structure is the primary source of high adhesion. In this study, we construct the adhesion design database for biomimetic adhesive system. A simple idealized fibrillar structure consisting of single array of beams is modeled. The fibers are assumed as oriented cylindrical cantilever beams with spherical tip. We consider three necessary conditions; buckling, fracture and sticking of fiber structure, which constrain the allowed geometry. The adhesion analysis is performed for the attachment system in contact with rough surfaces with different s values for different main design variables-fiber radius, aspect ratio and material elastic modulus and so on. The developed adhesion design databases are useful for understanding biological systems and for guiding of fabrication of the biomimetic attachment system.

• Journal of the Korean Wood Science and Technology
• /
• 제24권2호
• /
• pp.42-45
• /
• 1996

A residue from the newsprint waste was investigated as a filler in adhesive for bonding southern pine plywood. The residue was prepared by drying the wet residue to 8% moisture content and grinding the dry material using a laboratory Wiley mitt with a 75-${\mu}m$(200-mesh) screen. The residue was compared to a commercial filler commonly used in structural plywood adhesives. A total of 48 three-ply panels. 12.7mm nominal thickness and 0.3 by 0.3 m in size, were fabricated at two press times(4 and 5 min) and three assembly times(20, 40 and 60 min). Evaluations of the residue were carried out by performance tension shear tests after two 4-hour boil accelerated aging tests on plywood. The test results included tension shear strength and estimated wood failure values. All plywood made with the residue filler were comparable to the control-bonded plywood. These results indicate that residue from the newsprint waste streams would be suitable as filler for plywood adhesives.

• Journal of the Korean Wood Science and Technology
• /
• 제42권1호
• /
• pp.34-40
• /
• 2014

흰개미 방제 및 방곰팡이 효력이 입증된 저독성 네오티코치드계 목재보존제가 집성재 제조용 레조르시놀계 접착제의 접착력에 미치는 영향을 조사하였다. ACQ, CUAZ, 네오니코치드계 약제를 도포 처리한 다음 건조시킨 소나무 판재를 사용하였으며, 집성 접착 후에 블록 전단시험편을 채취하여 상태 및 촉진 열화 시험 후의 전단접착력과 목파율을 측정하여 비교하였다. ACQ 및 CUAZ 처리 집성재는 무처리 및 네오니코치드계 목재보존제 처리 집성재에 비하여 낮은 전단접착력을 보여 접착력 저하가 인정되었다. 이것은 이들 방부제 중에 함유되어 있는 구리화합물에 기인하는 것으로 판단되었다. 네오니코치드계 목재보존제 처리 집성재는 상태 및 촉진열화 시험 후에도 가장 우수한 전단접착력을 나타내 레조르시놀계 접착제의 접착성능에는 영향을 미치지 않는 것으로 판단하였다.

• The Journal of Advanced Prosthodontics
• /
• 제1권2호
• /
• pp.63-67
• /
• 2009

STATEMENT OF PROBLEM. Use of custom tray and tray adhesive is clinically recommended for elastomeric impression material. However there is not clear mention of drying time of tray adhesive in achieving appropriate bonding strength of tray material and impression material. PURPOSE. This study is to investigate an appropriate drying time of tray adhesives by evaluating tensile bonding strength between two types of polyvinylsiloxane impression materials and resin tray, according to various drying time intervals of tray adhesives, and with different manufacturing company combination of impression material and tray adhesive. MATERIAL AND METHODS. Adhesives used in this study were Silfix (Dentsply Caulk, Milford, Del, USA) and VPS Tray Adhesive (3M ESPE, Seefeld, Germany) and impression materials were Aquasil Ultra (monophase regular set, Dentsply Caulk, Milford, Del, USA) and Imprint II Garant (regular body, 3M ESPE, Seefeld, Germany). They were used combinations from the same manufacture and exchanged combinations of the two. The drying time was designed to air dry, 5 minutes, 10 minutes, 15 minutes, 20 minutes, and 25 minutes. Total 240 of test specimens were prepared by auto-polymerizing tray material(Instant Tray Mix, Lang, Wheeling, Il, USA) with 10 specimens in each group. The specimens were placed in the Universal Testing machine (Instron, model 3366, Instron Corp, University avenue, Nowood, MA, USA) to perform the tensile test (cross head speed 5 mm/min). The statistically efficient drying time was evaluated through ANOVA and Scheffe test. All the tests were performed at 95% confidence level. RESULTS. The results revealed that at least 10 minutes is needed for Silfix-Aquasil, and 15 minutes for VPS Tray Adhesive-Imprint II, to attain an appropriate tensile bonding strength. VPS Tray Adhesive-Imprint II had a superior tensile bonding strength when compared to Silfix-Aquasil over 15 minutes. Silfix-Aquasil had a superior bonding strength to VPS Tray Adhesive-Aquasil, and VPS Tray Adhesive-Imprint II had a superior tensile bonding strength to Silfix-Imprint II at all drying periods. CONCLUSION. Significant increase in tensile bonding strength with Silfix-Aquasil and VPS Tray adhesive-Imprint II combination until 10 and 15 minutes respectively. Tray adhesive-impression material combination from the same company presented higher tensile bonding strength at all drying time intervals than when using tray adhesive-impression material of different manufactures.