• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.4
• /
• pp.465-474
• /
• 2010

The effects of four types of tropical protein-rich trees on nutrient digestibility, nitrogen (N) balance, urinary purine derivative (PD) excretion and blood metabolites in four Thai Brahman cattle (290${\pm}$2.5 kg) were studied. The animals were fed twice daily, with each feeding consisting of 1 kg (fresh weight) rice straw and one of the four dietary supplements: i) 1.98 kg oven-dried rain tree pods (RTP) and 20 g premix (RTPP), ii) 980 g RTP and 1 kg sun-dried leucaena leaves and 20 g premix (LLRT), iii) 980 g RTP and 1 kg sun-dried cassia leaves and 20 g premix (CLRT) and iv) 980 g RTP and 1 kg sun-dried mulberry leaves and 20 g premix (MLRT). The apparent dry matter (DM) and organic matter (OM) digestibilities were higher (p<0.05) in cattle fed the CLRT supplement than in those fed the other supplements, whilst the apparent digestibility of neutral detergent fibre (NDF) was higher (p<0.05) in cattle fed the CLRT and MLRT supplements than in those fed the other supplements. The N-balance of cattle fed LLRT and CLRT supplements was higher (p<0.05) than in cattle fed RTPP and MLRT supplements, whilst the apparent digestibility of N was highest (p<0.05) in cattle fed RTPP supplement, compared to the other supplements. Allantoin and PD excretion in the urine, and the ratios of allantoin/DOMI and PD/DOMI were higher (p<0.05) in cattle fed RTPP and MLRT than for those fed LLRT and CLRT supplements. Plasma ${\beta}$-hydroxy butyrate (${\beta}$-HBA) and insulin concentrations were higher (p<0.05) in cattle fed RTPP supplement than in those fed the other supplements. The study demonstrated the value of using local multipurpose trees (MPTs) to improve Brahman cattle feeding systems in the tropics.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.166-166
• /
• 1982

This study has been made to make an observation regarding present status of the coal mine props which is desperately needed for coal production, despite of great shortage of the timber resources in this country, and investigate the effects of diffusion process on the decay resistances of the mine props as applied preservatives of Malenit and chromated zinc chloride. The results are as follows. 1. Present status of the coal mine props Total demand of coal mine props in the year of 1975 was approximately 456 thousand cubic meters. The main species used for mine props are conifer (mainly Pinus densiflora) and hardwood (mainly Quercus). Portions between them are half and half. With non fixed specification, wide varieties of timber in size and form are used. And volume of wood used per ton of coal production shows also wide range from 0.017 cubic meter to 0.03 cubic meter. 2. Decay resistance test a) The oven dry weight decreased between untreated specimen and treated specimen has not shown any significantly, although it has shown some differences in average values between them. It may be caused by the shorter length of the test. b) The strength of compression test between untreated specimen and treated specimen has also shown the same results as shown in case of weight decrease. Reasons assumed are the same. c) The amounts of the extractives in one percent of sodium hydroxide (NaOH) between untreated and treated specimen have shown the large value in case of untreated specimen than that of treated. 3. The economical benifit between untreated and treated wood when applied in field has seen better in long tenn base in case of treated wood, although the primary cost of treated wood add a little bit more cost than that of the untreated wood.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.335-343
• /
• 2002

Blend resin (PET/PETG 70/30 blend) of poly (ethylene terephthalate) (PET) and poly (ethylene terephthalate glycol) (PETG) of weight percent 70/30 was prepared by a twin-screw extruder. Undrawn films of the blend and pure PETG were made by melt-press in hot press. Drawn films were made by capillary rheometer. Crystallinity, shrinkage, thermal, dynamic mechanical, and mechanical properties of these blends and PETG drawn films were investigated by wide angle X-ray diffractometer, dry oven, DSC thermal analyzer, and tensile tester. The crystallinity and density of these films increased with increasing draw ratio and draw rate but decreased with increasing draw temperature. The crystallinity and density of the blend films were higher than those of PETG films. The tensile strength and tensile modulus of these drawn alms increased with increasing draw ratio and draw rate but decreased with increasing draw temperature. The tensile strength and tensile modulus of blend films were higher than those of PETG films. Shrinkage of PETG md blend films decreased with draw ratio and draw rate. Shrinkage of undrawn blend film was 600% higher than that of pure PET film.

• Korean Journal of Medicinal Crop Science
• /
• v.10 no.3
• /
• pp.200-205
• /
• 2002

Platycodin D was isolated from n-butanol extract of Platycodi radix(Platycodon grandiflorum and identified by the spectroscopic analysis using $^1H$ and $^{13}C$ NMR techniques. A new method of analysis of platycodin D by high performance liquid chromatography(HPLC) was established using a reversed phase system with YMC-Pack ODS-AM( 250 X 4.6 mm) column and 30% acetonitrile as a mobile phase. Evaporative light scattering detector was used as detector. The kinds of extraction solvents and methods were examined to determine the efficient extraction condition and HPLC analysis was carried out to establish the optimum drying condition for the root of Platycodon grandiflorum. The contents of Platycodin D was highest as 0.083% when platycodon roots were dried at $60^{\circ}C$ using dry oven.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.519-524
• /
• 2017

Physical, mechanical and deteriorating properties of Phellodendron amure were investigated. Air dried density located indoor was 0.41 but $0.43g/cm^3$ outdoor. In oven dry shrinkage, T/R ratio for located indoor was 1.40 but 1.32 outdoor. Hygroscopic property at $40^{\circ}C$ with 90% relative humidity was 16.30% for indoor and 15.80% for outdoor. Compressive strength for outdoor conditioned sample was 43.81 MPa but 40.33 MPa for indoor conditioned. Also bending strenght for outdoor conditioned was 84.63 MPa but 68.80 MPa for indoor conditioned. Impact strength was 3.43 and $4.00J/cm^2$ indoor and outdoor, respectively. Hardness at cross-section was 47.92 and 49.20 MPa indoor and outdoor, respectively. With one-year conditioning at indoor or outdoor, there was no significantly different in strength properties, which came from strong resistance for deterioration. Also Phellodendron amure wood showed dimensionally stable raw material based on low T/R ratio.

• Journal of Chest Surgery
• /
• v.20 no.4
• /
• pp.643-654
• /
• 1987

The effect of prostacyclin[PGI, ] on myocardial preservation during global ischemia was studied in the isolating working rabbit heart model. Forty hearts underwent a 15 minute period of retrograde nonworking perfusion with Krebs-Henseleit buffer solution [37*C] and were switched over to the working mode for 15 minutes. After baseline measurement of heart rate, peak aortic pressure, aortic flow, and coronary flow, all hearts were subjected to 60 minutes of ischemic arrest at 10*C induced with St. Thomas Hospital cardioplegic solution: Group I had single dose cardioplegia, Croup II double dose, Croup III oxygenated double dose, and Group IV single dose with PCI, infusion [10ng/min./gm heart weight]. Hearts were then revived with 15 minute period of nonworking reperfusion at normothermia, followed by 30 minutes of working perfusion. Repeat measurements of cardiac function were obtained and expressed as a percent of the preischemic baseline values. Oxygen content of arterial perfusate and coronary effluent was measured by designed time interval. Leakage of creatine kinase was determined during post-ischemic reperfusion period. Finally wet hearts were weighed and placed in 120*C oven for 36 hours for measurement of dry weight. In the PGI, treated group [IV], heart rate increased consistently throughout the period of reperfusion from 100*5.0% [p<0.001] to 107*6.2% [p<0.001]. The percent recovery of aortic flow showed 95*5.7% [p<0.001] at the first 3 minute and full recovery through the subsequent time. Coronary flow was augmented significantly in the 3 minute [96*6.2%, p<0.001] and then sustained above baseline values. Among the Croup I, II, and III, all hemodynamic values were significantly below preischemic levels. PGI2 relatively increased oxygen delivery [1.22*0.19ml/min, p<0.001] and myocardial oxygen consumption [0.90*0.13ml/min, p<0.001] during reperfusion period. Leakage of creatine kinase in the PGI2 group was 9.3*1.58IU/15min [p<0.001]. This was significantly lower than Group I [33.0*2.68 IU/15min]. The water content of PCI2 treated hearts [81*0.9%, p<0.001] was also lower than the other groups.

• Journal of Adhesion and Interface
• /
• v.3 no.2
• /
• pp.40-44
• /
• 2002

We invested effect of the keeping-time of uncured composite and thermal aging, of cured composite on adhesive strength for rubber-brass coated steel cord composite in this study. We also evaluated how the adhesive strength affects to tire endurance. Using PAD adhesion specimen, peel adhesive strength was measured. The uncured composite was kept for several days up to 35 days in factory. Cured composite was also kept for 5 and 10 days at $85^{\circ}C$ in dry oven. Peel adhesive strength was decreased with increasing keeping-time and showed lower value with increasing thermal aging time. The lower peel adhesive strength, the lower tire-endurance. This fact was caused by the humidity and thermal aging which affected in the decrease of adhesive strength of the rubber-steel cord composite and resulted in interface fracture between rubber and steel cord. This phenomenon was confirmed from SEM investigation and tire-endurance. It was just known that corrosion of steel cord's surface and aging of adhesive layer strongly affected to decrease of adhesive strength. This resulted in directly decreasing tire-endurance.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.1
• /
• pp.44-53
• /
• 1994

This research was carried out to investigate the effect of paper sludge addition on formaldehyde emission, and physical and mechanical properties of UF-particleboard. In order to investigate the effect of paper sludge addition to resin, particleboards were bonded with urea-formaldehyde resins containing 5, 10, 15% paper sludge powders of three types(A Type: -200 mesh, B Type: -100~+200 mesh. C Type: -50~+100 mesh), based on weight of resin solid. Also the effect of paper sludge addition to furnish was studied from particleboards fabricated with ratios of sludge to particle of 5:95, 10:90, 15:85 based on oven-dry weight. Tests were conducted on the manufactured particleboards to determine formaldehyde emission, bending properties, internal bond strength and thickness swelling. The obtained results were summarized as follows: The addition of paper sludge powder to resin yielded a higher pH of cured resin. Formaldehyde emission decreased with the increase of paper sludge powder addition to resin and paper sludge composition ratio to furnish. Particleboard bonded with urea-formaldehyde resin containing paper sludge powder and particleboard mixed with paper sludge have similar bending properties(MOR, MOE) and thickness swelling compared with control particleboard. Internal bond strength of particleboards treated with paper sludge were lower than that of control particleboard. The use of paper sludge as scavenger was achieved reduction of formaldehyde emission without depression of physical and mechanical properties of particleboard. Also the use of paper sludge was able to concluded that there is possibility of partial substitution of wood particle materials.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.1
• /
• pp.47-50
• /
• 2015

PURPOSE. This study aimed to discover a way to increase the bond strength between bis-acryl resins, using a comparison of the shear bond strengths attained from bis-acryl resins treated with light curing, pressure, oxygen inhibition, and heat. MATERIALS AND METHODS. Self-cured bis-acryl resin was used as both a base material and as a repair material. Seventy specimens were distributed into seven groups according to treatment methods: pressure - stored in a pressure cooker at 0.2 Mpa; oxygen inhibition- applied an oxygen inhibitor around the repaired material,; heat treatment - performed heat treatment in a dry oven at $60^{\circ}C$, $100^{\circ}C$, or $140^{\circ}C$. The shear bond strength was measured with a universal testing machine, and the shear bond strength (MPa) was calculated from the peak load of failure. A comparison of the bond strength between the repaired specimens was conducted using one-way ANOVA and Tukey multiple comparison tests (${\alpha}$=.05). RESULTS. There were no statistically significant differences in the shear bond strength between the control group and the light curing, pressure, and oxygen inhibition groups. However, the heat treatment groups showed statistically higher bond strengths than the groups treated without heat, and the groups treated at a higher temperature resulted in higher bond strengths. Statistically significant differences were seen between groups after different degrees of heat treatment, except in groups heated at $100^{\circ}C$ and $140^{\circ}C$. CONCLUSION. Strong bonding can be achieved between a bis-acryl base and bis-acryl repair material after heat treatment.

• Culinary science and hospitality research
• /
• v.15 no.3
• /
• pp.128-138
• /
• 2009

This study analyzed the qualitative characteristics and antioxidant effect of Artemisia by experimenting its medicinal effect and functionality. Moisture content increased in proportion to heating time and decreased in reverse proportion to temperature and time. In the contents of mineral compounds, P was shown in the order of roasting temperature $230^{\circ}C$ > $80^{\circ}C$ > $110^{\circ}C$, and blanching condition was 0.50% in one and two minute treatment and 0.38% in five minute treatment. The contents of Ca didn't have significant differences according to the types of treatment. The contents of Fe were higher than general vegetables with 0.54~1.02 mg/100 g. The contents of phenolic compounds were highest in the control plot, followed by one minute blanching and roasting at $110^{\circ}C$ was the lowest. The intensity of electron donating ability was decreased in 14 minute blanching at $230^{\circ}C$. Based on the result of the study, roasting at low temperature and blanching which is Korean traditional method are desirable when cooking with Artemisia.