• Journal of the Korean Wood Science and Technology
• /
• 제23권4호
• /
• pp.39-45
• /
• 1995

The plywoods commonly used as decorative interior materials for the construction are inflammable and so it is a causative factor for making fire accidents, resulting in the destruction of human life and personal properties. Indeed, it is, therefore, required to produce fire-retardant plywoods. In this study, a special grade of defect-free, Kapur plywood was used. Specimens were cut into 3- by 20cm dimensions from 120- by 240- by 0.33-cm panels(thin panel) or 120- by 240- by 0.5-cm panels(thick panel). Some specimens were treated with diammonium phosphate(DAP), but some were not treated with diammonium phosphate to use as control panels. Chemical absorption, drying curves, drying rates and dynamic Young's modulus were investigated. The results were summaries as follows; 1. The specimens were soaked into 19% diammonium phosphate solution by a full cell pressure process and the diammonium phosphate retained in the thin and thick plywoods was 1.409kg/$(30cm)^3$, 1.487kg/$(30cm)^3$, respectively. 2. Diammonium phosphate-treated plywoods were redried with press-drying process at one of either condition dried on the platen($115^{\circ}C$) for a period of time or dried on the platen($50^{\circ}C$) for 3 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. or dried on the platen($60^{\circ}C$) for 2 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. The drying rate of treated thin specimens dried at $60^{\circ}C$ plus $30^{\circ}C$ and $115^{\circ}C$ only was found to be 0.04 %/min. and 8.53 %/min. Similarly, the drying rate of treated thick specimens were 0.03 %/min. and 6.77 %/min. respectively. 3. It was evident that highly-significantly different drying rate of treated plywoods was observed between plywood thicknesses and platen temperatures and the rate was increased by elevating the platen temperature up to $115^{\circ}C$. Based on the two-way variance analysis, highly significant drying rate was observed from the interaction between plywood thicknesses and platen temperatures. 4. After redrying, the specimens were weighed and reconditioned to a constant weight in a facility maintained temperature ($20^{\circ}C$) and relative humidity(65%) prior to test dynamic Young's modulus. The test revealed that the thin specimens dried at the platen temperature of $50^{\circ}C$, $60^{\circ}C$, $115^{\circ}C$ and untreated specimens showed 1.070E+09 dyne/$cm^2$, 1.156E+09 dyne/$cm^2$, 1.243E+09 dyne/$cm^2$, and 1.052E+09 dyne/$cm^2$, respectively. Likewise, the thick specimens revealed 5.647E+09 dyne/$cm^2$ 5.670E+09 dyne/$cm^2$, 6.395E+09 dyne/$cm^2$ and 5.415E+09 dyne/$cm^2$, respectively. 5. It was evident that significantly different dynamic Young's modulus was observed between the plywood thickness and the platen temperature, but not in the two-way interaction between the plywood thickness${\times}$the platen temperature.

• 아시안잔디학회지
• /
• 제3권2호
• /
• pp.77-82
• /
• 1989

This experiment was carried out to determine the value of turfgrass clippings as a source of protein for animal feed. Levels of crude protein(CP) and in vitro dry matter digestibility(JVDMD) were determined for Korean lawngrass (Zoysia Japonica Steud.) under three levels of nitrogen fertilizer ( 0 , 350 and 700kg ha year and three levels of mowing interval between cuts (lO, 20, and 30 days). Sampling was done on the three-year old turffield on which nitrogen and mowing treatments were Imposed. Clippings were collected after mowing, and CP levels were calculated from a measurement of total N(CP = N >< 6.25) l)y Auto-analyser system-2 procedure and IVDMD by Maeng's method which was partly modified with Tilley and Terry's procedure. With the increased nitrogen legime the CP content of leaf clippings varied from 6.6 to 13.6% and that Of stem clippings from 4 to 10.3%. The CP levels of clippings were directly proportional to the N fertilization rate. The highest CP content was recorded in early July when it was 14.1% at 35OkgN ha -and I 18.l%kgN ha-1 with 10-wcek mowing interval. Mowing interval had little effect on the CP content in both leaf and stem clippings. The level of IVDMD in the Korean lawngrass clippings varied with mowing interval. The highest level measured was 47%, hut this varied during the growing season and occurred in the following order : early summer > summer > fall. This experiment has shown that Korean lawngrass clippings can he helpful source of protein for use in some animal feeds and that a high concentration of CP can occur depending upon N fertllizer and that of I VDM I) upon mowing practices.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권5호
• /
• pp.643-648
• /
• 2005

Near infrared reflectance spectroscopy (NIRS) has become increasingly used as a rapid, accurate method of evaluating some chemical constituents in cereal grains and forages. If samples could be analyzed without drying and grinding, then sample preparation time and costs may be reduced. This study was conducted to develop robust NIRS equations to predict fermentation quality of corn (Zea mays) silage and to select acceptable sample preparation methods for prediction of fermentation products in corn silage by NIRS. Prior to analysis, samples (n = 112) were either oven-dried and ground (OD), frozen in liquid nitrogen and ground (LN) and intact fresh (IF). Samples were scanned from 400 to 2,500 nm with an NIRS 6,500 monochromator. The samples were divided into calibration and validation sets. The spectral data were regressed on a range of dry matter (DM), pH and short chain organic acids using modified multivariate partial least squares (MPLS) analysis that used first and second order derivatives. All chemical analyses were conducted with fresh samples. From these treatments, calibration equations were developed successfully for concentrations of all constituents except butyric acid. Prediction accuracy, represented by standard error of prediction (SEP) and $R^2_{v}$ (variance accounted for in validation set), was slightly better with the LN treatment ($R^2$ 0.75-0.90) than for OD ($R^2$ 0.43-0.81) or IF ($R^2$ 0.62-0.79) treatments. Fermentation characteristics could be successfully predicted by NIRS analysis either with dry or fresh silage. Although statistical results for the OD and IF treatments were the lower than those of LN treatment, intact fresh (IF) treatment may be acceptable when processing is costly or when possible component alterations are expected.

• 한국건설순환자원학회논문집
• /
• 제6권1호
• /
• pp.95-102
• /
• 2011

순환굵은골재 콘크리트에서 혼합전의 순환굵은골재에 부착되어 있었던 모르타르의 성상변화를 조사하기 위한 방법으로, 시멘트풀 속에 순환굵은골재를 투입하여 경화시킨 다음 순환굵은골재에 부착된 모르타르의 비캇경도와 공극분포를 검토하였다. 이때 순환굵은골재는 모재콘크리트의 압축강도를 3수준(25.5MPa, 41.7MPa, 60.1MPa)으로 변화시켜 제조한 것을 파쇄시킨 다음 표면건조포화상태 및 절대건조상태에서 사용되었다. 실험결과 순환굵은골재에 부착된 모르타르의 비캇경도는 순환굵은골재의 모재콘크리트의 강도가 클수록 크며, 재령이 증가할수록 크게 되는 것으로 나타났다. 또한, 시멘트풀 속에서 부착모르타르의 공극분포는 $100nm{\sim}10{\mu}m$ 크기의 공극이 감소되며, 6nm~100nm 크기의 작은 공극이 증가하는 것으로 나타났다.

• 동물자원연구
• /
• 제29권4호
• /
• pp.183-190
• /
• 2018

This study was conducted to evaluate the acceptability of cured cooked boneless chicken drumettes as a raw material for Chuncheon Dakgalbi and to observe its effect on pH, lipid oxidation, volatile basic nitrogen (VBN) content and total viable count (TVC) during refrigerated storage under vacuum. Boneless chicken drumettes were dry cured with a mixed curing agent (0.20% w/w) consisting of sodium chloride (93.1%), sodium nitrite (5.9%) and sodium bicarbonate (1.0%) for 24 h at $2{\pm}2^{\circ}C$. Cured samples were cooked using an oven at $150^{\circ}C$ for 20 min and stored at $5.5{\pm}0.5^{\circ}C$ for 60 days under vacuum. Non-cured cooked sample was used as a control. Sensory evaluation was performed on day 2 of storage using 22 untrained panelists and samples were mixed with Dakgalbi sauce and reheated using a microwave for 2 min. There were no significant differences between control and treatment group on appearance, flavor, texture, juiciness and overall acceptability. Cured cooked boneless chicken drumettes had significantly (p<0.05) higher pH, lower lipid oxidation, VBN and TVC consistently during storage in comparison with control. These results suggest that dry curing could be applied to boneless chicken drumettes as raw material for Chuncheon Dakgalbi and could extend its shelf life during refrigerated storage under vacuum.

• Journal of the Korean Wood Science and Technology
• /
• 제31권4호
• /
• pp.31-37
• /
• 2003

국내에 많이 조림되어 있는 은사시나무(Populus alba×P. glandulosa)의 효율적인 건조를 위해 기본적인 물리적 성질을 조사하였다. 캠퍼스에서 벌채한 원목을 32 mm 판목 판재로 제재하여 관행열기건조(저온건조), 고온건조, 마이크로파-진공(MW/V)건조의 3가지 방식으로 건조하여 건조속도, 건조결함, 길이방향 수분경사, 색상 등을 비교하였다. 평균생재비중(전건무게-생재부피 기준)은 0.349±0.074였으며, 심재의 생재함수율은 200% 내외, 변재는 100%내외로 심재 함수율이 더 높았다. 생재에서 전건까지의 수축율은 방사방향과 접선방향이 각각 2.4%와 7.3%였으며 심·변재간 차이는 없었다. 생재에서 함수율 10%까지 건조시간은 컨디쇼닝시간을 제외하고 저온건조는 65시간, 고온건조는 35시간, MW/V건조는 22시간이었으며, 건조목 표면을 색차계로 조사한 결과 MW/V건조 판재의 색상이 가장 밝고 깨끗하였다.

• Geomechanics and Engineering
• /
• 제33권2호
• /
• pp.221-230
• /
• 2023

The liquefaction of soil occurs when a soil loses strength and stiffness because of applied stress, such as an earthquake or other changes in stress conditions that result in a loss of cohesion. Hence, a method for improving the strength of liquefiable soil needs to be developed. Many techniques have been presented for their possible applications to mitigate liquefiable soil. Recently, alternative methods using biopolymers (such as xanthan gum, guar gum, and gellan gum), nontraditional additives, have been introduced to stabilize fine-grained soils. However, no studies have been done on the use of carrageenan as a biopolymer for soil improvement. Due to of its rheological and chemical structure, carrageenan may have the potential for use as a biopolymer for soil improvement. This research aims to investigate the effect of adding carrageenan on the soil strength of treated liquefiable soil. The biopolymers used for comparison are carrageenan (as a novel biopolymer), xanthan gum, and guar gum. Then, sand samples were made in cylindrical molds (5 cm × 10 cm) by the dry mixing method. The amount of each biopolymer was 1%, 3%, and 5% of the total sample volume with a moisture content of 20%, and the samples were cured for seven days. In terms of observing the effect of temperature on the carrageenan-treated soil, several samples were prepared with dry sand that was heated in an oven at various temperatures (i.e., 20℃ to 75℃) before mixing. The samples were tested with the direct shear test, UCS test, and SEM test. It can increase the cohesion value of liquefiable soil by 22% to 60% compared to untreated soil. It also made the characteristics of the liquefiable increase by 60% to 92% from very loose sandy soil (i.e., ϕ=29°) to very dense sandy soil. Carrageenan was also shown to have a significant effect on the compressive strength and to exceed the liquefaction limit. Based on the results, carrageenan was found to have the potential for use as an alternative biopolymer.

• 한국산림과학회지
• /
• 제57권1호
• /
• pp.32-38
• /
• 1982

본연구(本硏究)는 합판제조시(合板製造時) 증량제(增量劑)로 이용(利用)되고 있는 소맥분(小麥粉)을 토란(土卵)으로 대체(代替)하기 위한 가능성(可能性)을 규명(糾明)하기 위해 실시(實施)되었다. 토란(土卵)과 소맥분(小麥粉)은 건조기내(乾燥器內)에서 전건상태(全乾狀態)로 건조(乾燥)시킨 후(後) 실험용(實驗用) 분쇄기(粉碎機)로 80~100 mesh로 분말화(粉末化)하여 증량제(增量劑)로 사용(使用)하였다. 합판제조(合板製造)에는 요소(尿素) 및 석탄산수지(石炭酸樹脂)를 사용(使用)하였으며 각수지(各樹脂)에 증량재료(增量材料)를 10, 20, 30, 50%의 비율(比率)로 혼합(混合)하여 시험(試驗)을 실시(實施)하였다. 본연구(本硏究)에서 얻어진 결론(結論)은 다음과 같이 요약(要約)할 수 있다. 1) 요소수지(尿素樹脂)의 상태(常態) 및 내수접착력(耐水接着力)은 모든 증량비율(增量比率)에서 토란(土卵)이 소맥분(小麥粉)을 훨씬 능가(能加)하고 있었다. 따라서 토란(土卵)은 소맥분(小麥粉)을 대체(代替)할 수 있는 가능성(可能性)을 보였다. 2) 석탄산수지(石炭酸樹脂)의 상태(常態) 및 내수접착력(耐水接着力)은 일반적(一般的)으로 소맥분(小麥粉)이 토란(土卵)보다 높은 접착력(接着力)을 나타내었다. 그러나 상태접착력(常態接着力)의 경우 30%와 50%의 증량(增量)에서는 토란(土卵)이 소맥분(小麥粉)보다 좋은 접착력(接着力)을 보였다.

• 한국가구학회지
• /
• 제21권1호
• /
• pp.62-71
• /
• 2010

This study was carried out to investigate the physical and mechanical properties of 6 hardwoods before and after heat treatment in an effort to produce the high quality industrial lumber product. The object of the research was to design living products with heat treated woods. The results were as follows. Specific gravities of green woods were in range from 0.87 to 1.12. The specific gravities of never treated woods showed higher than those of the heat treated woods. The shrinkage of heat treated woods when green to air & oven dry was significantly low, compared to never treated woods. The compression strengths parallel to grain of heat treated woods showed higher than those of never treated woods. The moduli of rupture (MOR) of never treated and heat treated woods were $170.37N/mm^2~107.07N/mm^2$ and $122.78N/mm^2~61.27N/mm^2$ respectively. MORs of heat treated woods showed lower than those of never treated woods. The modulus of elasticity (MOE) of heat treated woods showed higher than those of never treated woods.

• Journal of the Korean Wood Science and Technology
• /
• 제18권3호
• /
• pp.6-16
• /
• 1990

The objectives of this study were to investigate the relative effects of specific gravity and particle size on internal bond and tensile strengths and fracture toughness of particleboard and to compare mechanical strength with fracture toughness. The particleboard was manufactured with three different particle sizes at specific gravity levels of 0.6, 0.7, and 0.8 with a resin content of 10% based on oven dry weight. The results were summarized as follows: 1. Internal bond strength. fracture toughness in internal bond test. maximum tensile strength, and fracture toughness in tension test increased with the increase of specific gravity of particleboard. 2. As partcle size increased, internal bond strength, fracture toughness. maximum tensile strength. and fracture toughness in tension test increased. 3. The maximum tensile strength and fracture toughness appeared to be in a direct relationship, and then maximum tensile strength could be used for predicition of fracture toughness for tension test. 4. The fracture toughness in internal bond test was somewhat independent on induced crack length.