This study was performed to improve water quality of stream by applying hydraulic structures (weir and river bed material) made of porous concrete. The physical and chemical characteristics of porous concrete were measured to estimate application possibility of it in hydraulic structures and it was considered as a proper material for the hydraulic structures. In the results of comparison for the component of matters attached on the hydraulic structures made of porous and ordinary concrete, DW (dry weight) amount attached on porous concrete was 1.6 times higher than that on ordinary concrete under the condition of the same flow rate but influence by flow rate (difference of 10 times) was not shown. Therefore, we could understand that the material of media was more important in DW amount than flow rate. The rate of AFDM (ash free dry mass) to DW also was more at porous concrete than at ordinary concrete. Especially, the high rates of nitrogen and phosphorous in matters attached on porous concrete verify that they were removed by assimilation, adsorption and metabolism of periphyton. The removal percentage of SS, BOD, COD, T-N and T-P by hydraulic structures applying porous concrete compared with ordinary concrete was increased by 34.6%, 36.9%, 33.9%, 18.3% and 21.6%, respectively. Therefore, applying porous concrete to hydraulic structure is expected to contribute to improvement of stream water quality.
Journal of Korean Society for Atmospheric Environment
/
v.19
no.6
/
pp.689-699
/
2003
This study was to examine characteristics of treating toluene vapor, which gets to be problematic due to its harmful carcinogenicity and mass generation from various sources, through a biological treatment facility which is environment-friendly and adopts a high-efficient and low-cost clean technology. In order to identify whether Alnus Firma Fruit (AFF) can be used as a media for a bioreactor, its utility and basic operating factors, a study was conducted on pressure drop, supply of nutrient substances and retention time which are operating factors of a biofilter, and eliminating characteristics were compared between AFF and the conventional biological activatedcarbon (BAC) widely used as filter media. In the case of AFF, the initial microbial deposits was 2.3${\times}$10$^{7}$ CFU/g dry AFF, which represents the initial microbial density higher than the case of BAC showing 5.5${\times}$10$^{6}$ CFU/g dry BAC And it took about 2 weeks to acclimate until its eliminating rate got to be increased over 90%. As a result of comparing pressure loss taking place with the lapse of time between BAC and AFF, after 130 days passed at SV 25h$^{-1}$ , BAC showed that its eliminating efficiency had a tendency to drop greatly due to a great pressure loss (0.53\longrightarrow54.7 mm$H_2O$/m) caused by an excess of biomass as accumulated. On the other hand. AFF showed that the pressure drop was 0.53 mm$H_2O$/m, about 2 times as much as the initial pressure loss of 0.4 mm$H_2O$/m, which represents no great change in the pressure loss, and its eliminating efficiency was also shown to be continuously high. Therefore, when AFF was used as a filler for a biological treatment facility, a biological filter enabling improvement of the purifying efficiency to be promoted could be provided, and moreover, the pressure loss was so small that the filler replacement cycle or the back flushing cycle could be extended. So, even in terms of the operating cost, it was identified to be an economical filler When an inorganic material was used as a filler, the biofilters performance acted sensitively on whether nutrient substances were supplied or not. In the case of AFF with low adsorptivity, addition of ethyl-alcohol increased the solubility of toluene, and consequently, biodegradation got to be actively made by microbes, and thus, its eliminating rate could be increased. As the flow velocity and the inflow concentration got to be more increased, its eliminating rate got to be lower, and particularly, an increase in the flow velocity made its eliminating rate drop more greatly than an increase in the concentration.
Journal of The Korean Society of Grassland and Forage Science
/
v.6
no.3
/
pp.151-156
/
1986
There are differences in recommendations in the USA as to whether nitrogen fertilizer should be applied when establishing alfalfa (Medicago sativa L). The reason for not applying nitrogen is because some researchers found the addition of nitrogen reduced nodulation of alfalfa plants. A replicated experiment was conducted under controlled environmental conditions at the University of Nevada-Reno, Reno, Nevada, USA, to determine the effects of nitrogen application on seedling growth and nodulation of alfalfa when grown in a cool environment. A sterile sand was used in the growing media to which a complete nutrient solution minus nitrogen was applied volumetrically to each pot daily. Half of the pots received $NH_4NO_3$, at the rate of 11.2 kg/ha, at seeding and two and four weeks after planting, giving a total nitrogen application rate of 33.6 kg/ha. Rhizobia inoculant (R-12) consisted of a mixture of strains 171-15a. 1682c and 80 PI 265 of Rhizobium meliloti. Inoculant was applied to the seeds prior to planting and to the sand media at two and four weeks after seeding. Twenty seeds were planted in pots 14.0 cm in diameter and 11.5 cm deep. Seedlings were thinned after emergence to ten plants per pot. They were grown in a controlled environment chamber with a 16-hour light period. Soil temperatures at 6 cm depth ranged from $5.7^{\circ}C\;to\;21.5^{\circ}C$ and had a daily mean of $16.2^{\circ}C$ Plants were harvested at weekly intervals for seven weeks at which time root, shoot and total length, dry weight, volume and number of nodules per plant were determined. Root, shoot and total length were not affected by nitrogen fertilizer. However, application of nitrogen increased the size of the seedlings as determined by dry weight and volume when compared to plants which were not fertilized. This indicates that rhizobia did not fix enough atmospheric nitrogen to promote good growth. Nitrogen application resulted in significantly more nodules per plant. The effect of nitrogen fertilizer became more apparent as the plant became older. Results of this experiment show there are benefits from applying nitrogen at a low rate when establishing alfalfa under a cool environment.
Growth of red pepper (Capsicum annuum) 'Kumtap', tomato (Lycoperisocon esculentum) 'Seokwang', petunia (Petunia hybrida) 'Madness Rose', and pansy (Viola tricolor) 'Magestic Giant' in mixtures of chestnut woodchips and granular rockwool at 25:75, 50:50, or 75:25 (v/v) was examined. Chestnut woodchips were soaked in water for 48 hours or aged in open field for 6 months in order to remove substances impeding plant growth. A commercial plug medium was used as the control. All treatments showed in a similar result in red pepper, petunia, and pansy. Plant height, fresh weight, dry weight, and chlorophyll content in media containing chestnut woodchips, especially in higher proportions, were poorer as compared to those in the control. On the contrary, height, fresh weight, and dry weight of tomato seedlings in media containing woodchips were significantly higher than those in the control. For petunia, pansy, and red pepper, six month ageing in open field of woodchips was more favorable for growth than 48 hour water soaking. Emergance of petunia seed was inferior, especially when woodchip content was higher, to the other crops with a resultant growth suppression. From the results, chestnut woodchips proved to be a practical material as a medium component only in tomato plants.
Lee Kang Mo;Kwon Jeong Hwa;Hwang Seung Jae;Jeong Byoung Ryong
Journal of Bio-Environment Control
/
v.14
no.4
/
pp.302-306
/
2005
This Study was Conducted in 3 glasshouse to examine the Possibility for cultivation of plug seedlings using four growing media containing recycled PET-bottle-particles (PBT) as a medium component. Plug seedlings of 'Seokwang' tomato were grown in media containing $100\%$ PBT, $100\%$ peatmoss, or $50\%$$PBT+50\%$ peatmoss. A commercial plug medium (Tosilee) was used as the control. All seeds were sown in 128 cell plug trays on July 12, 2004. Seedling growth was measured at 30 days after sowing. Percent seed germination was greater than 95% in all treatments. Plant height, shoot fresh and dry weights, leaf area, and hypocotyl length were the greatest in the control treatment. Root length and weight were the greatest in the $100\%$ PBT treatment, which had a medium pH of 7.3. Leaf area and shoot dry weight were greater in the $50\%$$PBT+50\%$ peatmoss treatment, than in the $100\%$ PBT treatment, while they were the smallest in the $100\%$ peatmoss treatment. No toxicity symptoms caused by the use or PBT had been observed in any treatment. The results suggest a possibility of recycled PBT, a valuable reusable resource, to be used as a component for medium amendments in horticultural transplant production.
The content of taxol and related compounds in needle and stem tissues of exotic yews growing in the Chollipo Arboretum which located in the West Sea of Korea were determined by HPLC. A considerable variation in contents of taxol and the related compounds within species and among cultivars were observed. The content of taxol was much higher in the needles than those in the young stem tissues except T. X media cv. Vermuleun, T. baccata cv. Washingtonii, and T. X cuspidata cv. Nana, and the content of 10-deacetyl baccatin III(10-DAB III) was also slightly higher in the needle. The needle of T. cuspidata cv. Nigra collected from April was contained the high amount of taxol(1,027 ${\mu}g$ per g dry weight) and also contained high quantity in 10-DAB III(267 ${\mu}g$ per g dry weight). Concentration of taxol in needle was significantly greater than those of meristemic and ovary tissues, Exotic yews growing at the Chollipo Arboretum containing T. cuspidata cv. Nigra could be suitable materials as a source for the tissue and cell cultures for production of taxol.
To improve the productivity of shiitake mushroom (Lentinula edodes), seven different types of media for liquid spawn (denoted as "A" to "G") were prepared with 0.3% soybean meal and varying sugar and glucose concentrations. During 14 days of incubation, the pH of the liquid culture gradually acidified with increasing incubation period. Additionally, there was a significant, but not prominent, difference in the degree of acidification depending on the sugar to glucose ratio. Liquid spawn culture "G," which had the highest sugar content was the most acidic on the last day of incubation. Mycelium dry weight increased significantly with increasing incubation period, and there was no significant difference in mycelium dry weight irrespective of the sugar to glucose ratio even after 14 days of culture. The inoculation of liquid spawn in sawdust medium with an inoculation volume ${\geq}45mL$ and incubation period of 15 to 18 days were the optimal culture conditions. Productivity of fruit bodies in sawdust medium and mushrooms treated with liquid spawn was significantly higher compared to solid spawn treatment. The mushrooms treated with liquid spawn had better chewiness, and the free amino acid content, which is associated with savory taste, was higher in these mushrooms compared to those treated with solid spawn.
Tai, Nguyen Huy;Park, Jong Seok;Shin, Jong Hwa;Ahn, Tae In;Son, Jung Eek
Horticultural Science & Technology
/
v.32
no.3
/
pp.340-345
/
2014
Since the moisture content (MC) of growing medium closely related with the crop transpiration, the MC should be included to the environmental factors to be considered for irrigation control in soilless culture. The objective of this study was to analyze the transpiration of paprika plants using daily mean solar radiation (RAD) and vapor pressure deficit (VPD) as well as the growth of the plants at different MCs of rockwool growing media. The starting points of irrigation were controlled by a moisture sensor with minimum set points of 40%, 50%, and 60% of MCs. The canopy transpirations were measured for 80 to 120 days after transplanting and analyzed. The transpirations were well regressed with a combination of both RAD and VPD rather than daily mean RAD only under the controlled MCs. The transpiration at 60% MC was higher than those at 50% and 40% MCs. Leaf area, leaf fresh and dry weights at 60% MC were higher than those at 50% and 40% MCs while the number of leaves had no significant difference among the MCs. There were no significant differences in number of fruits and fruit size among all the MCs, while fruit weight was significantly lower at 40% MC than other treatments. Fresh and dry fruit yields were the highest at 60% MC. Therefore it was concluded that the transpiration was affected by the MC of rockwool growing medium and the minimum set point of 50-60% MC of rockwool growing medium gave better effects on the growth of the paprika plants.
Fattah, Mohammed Y.;Al-Mosawi, Mosa J.;Al-Ameri, Abbas F.I.
Earthquakes and Structures
/
v.11
no.1
/
pp.83-107
/
2016
In this study, the response and behavior of machine foundations resting on dry and saturated sand was investigated experimentally. A physical model was manufactured to simulate steady state harmonic load applied on a footing resting on sandy soil at different operating frequencies. Total of (84) physical models were performed. The parameters that were taken into consideration include loading frequency, size of footing and different soil conditions. The footing parameters are related to the size of the rectangular footing and depth of embedment. Two sizes of rectangular steel model footing were used. The footings were tested by changing all parameters at the surface and at 50 mm depth below model surface. Meanwhile, the investigated parameters of the soil condition include dry and saturated sand for two relative densities; 30 % and 80 %. The dynamic loading was applied at different operating frequencies. The response of the footing was elaborated by measuring the amplitude of displacement using the vibration meter. The response of the soil to dynamic loading includes measuring the stresses inside soil media by using piezoelectric sensors. It was concluded that the final settlement (St) of the foundation increases with increasing the amplitude of dynamic force, operating frequency and degree of saturation. Meanwhile, it decreases with increasing the relative density of sand, modulus of elasticity and embedding inside soils. The maximum displacement amplitude exhibits its maximum value at the resonance frequency, which is found to be about 33.34 to 41.67 Hz. In general, embedment of footing in sandy soils leads to a beneficial reduction in dynamic response (displacement and excess pore water pressure) for all soil types in different percentages accompanied by an increase in soil strength.
KSCE Journal of Civil and Environmental Engineering Research
/
v.7
no.4
/
pp.41-50
/
1987
The present study was conducted to measure and predict the leachate generation and to establish the methods of leachate control and handling by both field and lab-lysimeter studies. The change of biodegradable matter, field capacity, dry density, quantity and quality of leachate as a function of time of landilling were measured. The model based on the theory of unsaturated flow and contaminant transport in porous media was developed and simulation model was used for the prediction of movement of landfill moisture and for the strength in leachate in terms of organic and inorganic contaminant. The model constructed from the present study in terms of unsaturated decomposition and transport combined with the evapotranspiration and surface runoff showed good agreement with the results obtained by lysimeter studies.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.