• 조명전기설비학회논문지
• /
• 제29권6호
• /
• pp.49-57
• /
• 2015

This paper presents the discharge characteristics and economic feasibility of a Dry $Air/O_2$ and a $N_2/O_2$ mixture gas in order to review $SF_6$ alternative. From AC discharge experiment in an quasi-uniform field, it was found that the optimal $N_2/O_2$ mixing ratio which breakdown voltage and surface flashover voltage were the highest was 70/30 and that the pressure dependence on the breakdown voltage was higher than that of the surface flashover voltage in the Dry $Air/O_2$ and the $N_2/O_2$ mixture gas. The mixing ratio (70/30) and the tendency of the pressure dependence were described in detail based on physical factors (impact ionization coefficient, electron attachment coefficient, secondary electron emission coefficient) involved in discharge mechanism and a electron source, respectively. In addition, the performance insulation and the economic feasibility of the Dry $Air/O_2$ and the $N_2/O_2$ mixture gas were discussed so that Dry $Air/O_2$ mixture gaswas more suitable than $N_2/O_2$ mixture gas to the $SF_6$ alternative.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1400_1401
• /
• 2009

In this paper describes the comparisons of the surface flashover characteristics according to the change of the insulation media by experimental GIS(Gas Insulated Switchgear) chamber in accordance with change of pressure(P) and electrode distance(d). The using insulation medias are $SF_6$, Dry-Air, I-Air(Imitation Air, $N_2$ : $O_2$ = 79[%] : 21[%]), $N_2:O_2$ mixture gas and pure $N_2$. In this study, in order to compare the properties $SF_6$ and order insulation gas, we investigated the properties of the various insulation media with a knife to knife electrode under ac high voltage application. The gas pressure was changed from 1 to 5[atm]. as a result, it was found that dielectric strength is $SF_6$ > I-Air > Dry-Air and the best environmental preservation gas is Dry-Air.

• 조명전기설비학회논문지
• /
• 제29권11호
• /
• pp.41-46
• /
• 2015

This study was conducted to discover a substitute of $SF_6$ gas. $SF_6$ gas is widely used across the industries. Thanks to superior electrical properties, in particular, it has been commonly used in electrical industry. However, there have been a lot of studies on its serious effect on global warming. As a substitute of this synthetic gas, a mixture of dry air and $N_2/O_2$ was chosen in this study. In case of $N_2/O_2$, dielectric strength differs depending on the mixing ratio. This study examined dielectric breakdown and flashover after adjusting oxygen percentage in the dry air. This test was conducted in a quasi-uniform electric field depending on pressure, oxygen concentration and gas mixtures. The test results found that dielectric voltage and flashover voltage were the highest at a certain oxygen concentration. It is the results of this photoionization and electron attachment of oxygen.

• 한국산업융합학회 논문집
• /
• 제15권2호
• /
• pp.49-54
• /
• 2012

With the improvement of industrial society, the high quality electrical energy, simplification of operation and maintenance, ensuring reliability and safety are being required. This paper reviews a basic data of the surface discharge characteristics for teflon resin in not only pure $N_2$, $N_2:O_2$ mixture gas and Dry-Air as being focused on environmentally friendly insulating Gas also $SF_6$. Used electrodes are Knife to Knife. With the changing distance of electrodes and pressure, we can find it, surface discharge voltages and surface dielectric strengths, respectively. Surface discharge Voltages of $N_2:O_2=80:20$ mixture gas are more higher than the $N_2:O_2$ Mixture gases.

• 조명전기설비학회논문지
• /
• 제23권5호
• /
• pp.96-100
• /
• 2009

산업사회의 발달과 더불어 신뢰성 높은 양질의 전기에너지와 운전 및 보수의 간편화, 계통 운용의 신뢰성, 안전성 확보가 요구되고 있다. 따라서 본 논문은 각종 전력설비에서 $SF_6$을 대체할 수 있는 친환경절연제로 연구되고 있는 $N_2-O_2$ 혼합가스($N_2:O_2=100$ : 0, 79 : 21, 60 : 40, 40 : 60) 절연파괴특성을 구명(究明)하여 이를 $SF_6$가스의 특성과 비교하였다. 이상의 연구 결과, 제조공기와 Dry-Air 절연특성을 구명함으로서 각종 전력응용 설비의 절연설계에 $SF_6$ 대신 친환경적인 모의공기를 사용 가능함을 본 연구에서 구명(究明)하였다. 제조공기를 이용한 친환경적인 절연재 사용으로 지구의 온난화현상 감소에 크게 기여할 것으로 기대된다.

• 청정기술
• /
• 제25권1호
• /
• pp.81-90
• /
• 2019

프로페인($C_3H_8$)의 건식 개질($CO_2$ 개질)을 통한 합성 가스($H_2$와 CO 혼합물) 제조를 위해 $Ni-CeO_2/{\gamma}-Al_2O_3$ 촉매가 충진된 유전체 장벽 방전 플라즈마 반응기를 사용하였다. 열 또는 플라즈마에 의해 환원된 $Ni-CeO_2/{\gamma}-Al_2O_3$ 촉매를 사용하여 $C_3H_8/CO_2$ 비율 1/3, 총 유량 $300mL\;min^{-1}$에서 플라즈마-촉매 건식 개질을 수행하였다. 건식 개질에 대한 촉매 활성은 온도범위 $500{\sim}600^{\circ}C$에서 평가되었다. $Ni-CeO_2/{\gamma}-Al_2O_3$ 촉매 제조를 위해 전구물질 수용액(질산니켈, 질산세륨)으로 함침된 ${\gamma}-Al_2O_3$를 공기 분위기에서 소성시킨 후, $H_2/Ar$ 분위기에서 환원시켰다. 촉매 특성 조사에는 X-선 회절분석기(XRD), 투과전자현미경(TEM), 전계 방출 주사전자현미경(FE-SEM), 승온 탈착($H_2-TPD$, $CO_2-TPD$) 및 라만 분광기가 이용되었다. 열로 환원된 촉매와 비교하면 플라즈마 방전하에서 환원된 $Ni-CeO_2/{\gamma}-Al_2O_3$ 촉매가 개질 반응을 통한 합성 가스 생산에서 보다 우수한 촉매 활성을 나타내었다. 또한, 플라즈마로 환원된 $Ni-CeO_2/{\gamma}-Al_2O_3$가 개질 반응의 문제점인 탄소퇴적 관점에서 장기 촉매 안정성을 보여주었다.