• Elastomers and Composites
• /
• v.39 no.1
• /
• pp.12-22
• /
• 2004

The plasma surface modification of natural rubber vulcanizate was carried out using chlorodifluoromethane in a radio-frequency (13.56 MHz) electrodeless bell type plasma reactor. The modification was qualitatively assessed by Fourier transform infrared spectroscopy. The frictional force of the plasma-treated surface was found to decrease with the time of plasma treatment. An increase in the surface polarity, as evidenced by the decrease in contact angle of a sessile drop of water and ethylene glycol on the natural rubber vulcanizate surface, was noted with the plasma modification. In the case of similar plasma treatment of glass surface, only a reduction in the polarity was observed. The use of geometric and harmonic mean methods was found to be useful to evaluate the London dispersive and specific components of surface free energy. Irrespective of the method used for evaluation, an increasing trend in the surface free energy was noted with increasing plasma treatment time. However, the harmonic mean method yielded comparatively higher values of surface free energy than the geometric mean method. The plasma surface modification was found to vary the frictional coefficient by influencing the interfacial, hysteresis and viscous components of friction in opposing dual manners.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.2
• /
• pp.201-210
• /
• 2018

In this study, we formulated oil-in-water emulsion composition for skin care products containing jadeite powder which is well known as far-infrared radiating material. Jadeite powder could sustain stable dispersion in aqueous solvents over a month and this helped mixing it high content in oil-in-water emulsion formulation. To identify the effect of jadeite as a far-infrared radiator materials relating to the skin surface temperature change, we applied emulsion formulation containing 2 weight percent jadeite powder onto facial skin surface and blank formulation together and analyzed surface temperature with thermo-vision. Our results showed that the temperature difference between jadeite powder formulation applied region and blank formulation reached to 1.5 ~ 2.0 degree Celsius. We also performed same test with nephrite powder and titanium dioxide powder but only jadeite powder containing formulation showed significant skin temperature change. To elucidate main cause of heat energy transfer, we tested heat radiation, energy dispersive spectrometer analysis and measured far infrared radiance emissivity, diffuse reflectance spectra and water evaporation rate. We found out jadeite powder could retard water evaporation effectively from the skin surface and resist temperature drop down. This is because of the innate chemical composition and surface structure of jadeite, which can bind with water molecules to form hydrogen bonds. It is concluded that we can develop novel skin care products for moisturizing and thermos with jadeite powder.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.17 no.2
• /
• pp.1-10
• /
• 2018

Due to the sudden drop in the number of students currently, Korea is facing a turning point in the urgent need to revise the school acceptance plan policy. Especially, in the case of the decrease of the number of students, the reckless establishment of a school in a certain area has an adverse effect of further reducing the number of students in the nearby school. The purpose of this study is to provide basic data on the appropriate scale policy through the correlation between the opening school year and the number of enrolled students in 19 out of 1,179 schools. The results of the linear regression analysis are as follows : First, in 19 cities nationwide, 17 cities except Suwon city and Anyang city had a hypothesis that 'the number of new school students is more than the number of existing school students'. Second, not only the results of the analysis of 1,179 schools in Korea, but also the results of regional analysis showed a hypothesis. Third, there are many small schools and oversized schools in the national city. It is necessary to establish an appropriate school policy.

• Tuberculosis and Respiratory Diseases
• /
• v.38 no.2
• /
• pp.135-142
• /
• 1991

We reviewed 15 cases of mesothelioma of the pleura, of which three cases were localized benign form and 12 cases were malignant diffuse form. The tumors were distributed equally in both sexes, and occured most commonly in fifth to seventh decades. The history of exposure to asbestos was present in only one case. The chief complaints were mainly chest pain and dyspnea. Associated symptoms were cough, sputum, hemoptysis, weight loss, anorexia, chill. On physical examination, unilateral, decreased breathing sound was main feature. The simple chest radiograph showed masses in all localized mesotheliomas (100%) and in 2 diffuse mesotheliomas (17%). 8 cases of diffuse mesotheliomas (67%) showed unilateral pleural effusions. Pleural effusions were mainly bloody (67%), and almost all were exudates. In all localized mesotheliomas, final diagnosis was made by open thoracotomy. In diffuse mesotheliomas, final diagnosis was made by open thoracotomy in 7 cases, chest wall mass biopsy in 2 cases, thoracoscopic biopsy in 1 case, pleural biopsy in 1 case, and pleural biopsy combined with axillary lymph node biopsy in 1 case. Localized mesotheliomas were treated by simple excision with good prognosis. In diffuse mesotheliomas, surgical treatment (pleuropneumonectomy, pleurectomy), chemotherapy, or radiotherapy, alone or in combination, were used with dismal prognosis. The prognostic factors were not found due to the small number of cases, incomplete follow up, and early drop out.

• Korean Journal of Food Science and Technology
• /
• v.38 no.2
• /
• pp.249-255
• /
• 2006

The optimum culture conditions for the ice nucleating activity and the cell growth of Xanthomonas translucens KCTC 2751 were investigated. The optimum initial pH and temperature for the cell growth and the ice nucleating activity were 6.5 and $25^{\circ}C$, respectively. The optimum culture medium for the ice nucleating activity was composed of 1.0% maltose, 1.4% yeast extract, 0.8% digested of gelatin, and 0.03% KCI in distilled water. Freezing operations carried out on distilled water showed that the degrees of supercooling were $-7.90^{\circ}C$ without ice nucleators, $-1.56^{\circ}C$ with silver iodide as a commercial ice nucleator, and $-1.36^{\circ}C$ when Xanthomonas translucens KCTC 2751 were added. During progressive freeze-concentration assays, the addition of Xanthomonas translucens KCTC 2751 led to lower saccharose concentrations in the crystals, while the cells led to higher saccharose concetrations in the concentrated phase.

• Membrane Journal
• /
• v.8 no.4
• /
• pp.203-209
• /
• 1998

The cutting oil emulsion microfiltration was carried out on dead-end call and crossflow systems equipped with 0.22 $\mu$m GVHP Millipore and 0.2 m stainless steel Mott microfiltration membranes, respectivdy. The oil drop size in the emulsion was varied from 0.07 to 0.22 $\mu$m. Cake filtration(CFM) and standard pore blocking models(SPBM) were applied to predict the permeation flux. The permeation fluxes of 0.01 vol% oil emulsion followed CFM for dead-end system very well under the condition of 400 rpm and below 100 kPa. The SPBM was, however, suitable for the permeation flux at 400 rpm and above 150 kPa. The oil layer on the membrane surface was destroyed and reproduced repeatedly as operating pressure was suddenly changed from 60 to 200 kPa, and then returned to 60 kPa. Also, we estimated the critical entry pressure(CEP) which is changed from CFM to SPBM, and CEP for dead-end system was around 100 kPa. The CEP increased from around 100 to 150 kPa for the crossflow system as the oil concentration increased from 0.01 to 0.03 vol% when Reynolds number was 7080.

• Journal of Technologic Dentistry
• /
• v.34 no.3
• /
• pp.263-271
• /
• 2012

Purpose: The purpose of this research was to examine department satisfaction for improving the competitiveness of department of dental technology and providing basic data for students successful guidance. Methods: The study subject were 560 students from 4 colleges, and they were selected by the convenient sampling method. Data for this survey was obtain by self-administration method. This questionnaire consist of general characteristics, the awareness of before entering department of dental technology, the satisfaction of department of dental technology, an opinion about change of one's course and temporary absence. Results: About the time of selecting their major, 70.1% of students answered the most before highschool. Department of dental technology and the most common source of information in selecting a majors is the person oneself(52.6%). The person who answers because of knowing a little bit for the question asking the priori knowledge of department of dental technology showed up as 66.3%. About the motivation for selection their major, 37.4% of students answered the most it seemed to be a future prospect. As to the extend of department satisfaction, the satisfaction showed up as 63.3%, but the extend of satisfaction was exposed to reduce as the grade increased. The dissatisfaction factor is the difficulty of the theory(29.8%). Many students do not want to change their majors even if they are provided with the chance to do so(68.7%). From the survey related to the experience of thinking over temporary absence and drop out, 56.8% of students responded they had experienced thinking about that. Current feelings after department selection was found to be the most significant factor that affects satisfaction of department of dental technology(Adjusted $R^2$=48.3%). Conclusion: The extend of satisfaction of the women is low. The extend of satisfaction reduces as the grade increases. The school subject extend of satisfaction can know that ratio about of considering the leave of absence and voluntary withdrawal increases. Therefore, the plan of education that women can adapt the women o the school subject well and that it can be satisfied is sought for. It is considered that effort promoting the extend of satisfaction is needed as the grade increases.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.11
• /
• pp.5-14
• /
• 2018

Worldwide, soil compaction work is one of the most important activities that are carried out on civil engineering works sites. Compaction work, particularly in the area of road construction, is considered to be important, as poor compaction work is closely related with poor construction even after a construction is complete. Currently, the plate bearing test or the sand cone method relative to the unit weight of soil test are commonly used to measure the degree of compaction, but as these require a great deal of time, equipment and manpower, it is difficult to secure economic efficiency. The method that is used to measure the degree of compaction according to the penetration depth achieved by free fall objects through gravity is the Free-Fall Penetration Test (FFPT), which uses a so-called "portable compaction measuring meter (PCMM)." In this study, the degree of compaction was measured and a penetration depth graph was developed after the field test using the portable compaction measuring meter. The coefficient of determination was 0.963 at a drop height of 10 cm, showing the highest level of accuracy. Both horizontal axis and longitudinal axis were developed in a decimal form of graph, and the range of allowable error was ${\pm}1.28mm$ based on the penetration depth. The portable compaction measuring meter makes it possible to measure the degree of compaction simply, quickly and accurately in the field, which will ensure economic efficiency and facilitate the process management.

• Journal of Embryo Transfer
• /
• v.18 no.3
• /
• pp.237-242
• /
• 2003

These studies were carried out to establish an effective in vitro embryo transfer methods by analyzing several factors. The base media were TCM-199 solution for in vitro maturation(IVM) of bovine follicular oocytes and Fer-TALP solution for in vitro fertilization(IVF) and CRlaa medium for in vitro culture(IVC). IVC used the fertilized oocytes of 24-hr culture (day 1)after IVF. Embryos were cultured in drop-culture that contained 25 embryos per 10${mu}ell$. Blastocysts cultured for 7 to 9 in vitro were transferred to recipients. The results obtained were as follows: 1. The pregnancy rate according to different region of embryo transfer were 33.8％, 48.1％, 45.0％ and 35.3％ respectively. 2. The pregnancy rate according to the parity of recipient when embryos were transferred to nulliparous (42.9％) was higher than that of 1∼3nd parlous(36.9％), however there were not show significant difference each other. 3. According to the stage of blastocyst, the pregnancy rate when middle blastocysts (MB) (45.5％) were transferred to recipients were higher than that of late blastocysts (LB) (41.0％). 4. When IVF-derived blastocysts cultured for 7 to 9 day were transferred to recipients, the pregnancy rate was higher 7 day of blastocyst than that of 8 day or 9 day of blastocyst. The results of embryo transfer according to the regions, the parity of recipient and the development stage showed that blastocyst formed for 7day transferred to nulliparou were higher pregnancy rate than others.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.4
• /
• pp.211-217
• /
• 2004

The instrument used in this study consists of a lkg capacity loadcell and a Imm tipping bucket rain gauge. There are two signals: one is the weight of the water in the tipping bucket and the other is the pulse from the reversing mechanism of the tipping bucket. The loadcell measures the weight of water with a 0.0lmm resolution up to 1mm rainfall and the bucket reverses beyond 1mm. From this point, a pulse signal generates and the loadcell starts measuring the weight again. A field test was carried out with the range of rainfall intensity from 42mm/h to 250mm/h. The result shows an error range from -2.2% to + 2.6% in 12 measurement cases with a rainfall of l00mm or more. This result satisfies the WMO recommendation for rainfall intensity instrumentation which allows a 5% range. In a field experiment during 17 to 19 August, 2004, more than 100mm/h rainfall intensity was observed by this instrument, confirming that our instrument has a sufficient capacity of rainfall intensity measurement under extreme conditions like Jangma (Bai-u season). Compared with existing commercial models which employ a water drop measurement method, our method can give a practical solution for diagnostic check of remote rain gauges using two independent signals.