• 복식문화연구
• /
• 제20권4호
• /
• pp.529-534
• /
• 2012

An analysis of adult women's somatotypes classified by drop values can provide important preliminary data in determining standard clothing sizes for mass production of ready-made clothes. This is because the values are based on measurements of girth, which is essential information in the size-setting process. Adult women's body types are classified according to drop values in a standard clothing size system adopted by Korea and several other countries. This study aims to identify somatotype characteristics of adult women aged 20 to 69 by using five types of drop values: bust-waist, hip-waist, hip-bust, abdomen-waist, and hip-abdomen. Statistical cluster analysis of collected data revealed four somatotypes among adult women. Type R, with a developed lower body, accounted for 36.6%, and its bodyline was found to be closest to the average adult woman. Type X, constituting 25.4%, had the curviest contours of all and relatively large hip measurements, with the thinnest figure. Flat abdomen and hips characterized type Y, which accounted for 18.9%. Lastly, 19.0% fell into type H, the most obese figure, in which abdomen girth exceeded hip measurements. Since type H has excess fat deposits in the abdomen, not only hip measurements but also abdomen girth should be considered when designing top longer than torso-length and bottoms.

• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.72-80
• /
• 2013

For the proper cooling of in-wheel motor, the cooling channel should have the characteristics which are low pressure drop and adequate cooling oil supply to motor part. In this study, the flow performance of cooling channel for in-wheel motor was evaluated and the shape of the channel was optimized. First, the pressure drop and flow distribution characteristics of the initial channel model were evaluated using numerical analysis. Also, by the result of analysis and design modification, 4 design parameters of the channel were selected. Second, using the Taguchi optimal method, the cooling channel was optimized. In the method, nine models with different levels of the design parameters were generated and the flow characteristics of each models was estimated. Base on the result, the main effect of the design parameters was founded and optimized model was obtained. For the optimized model, the pressure drop and oil flow rate were about 0.196 bar and 0.207 L/min, respectively. The pressure drop decreased by about 0.3 bar and the oil flow rate to the motor part increased by about 0.2 L/min compared to the initial model.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3766-3777
• /
• 2022

It is essential to ensure the safety of spent nuclear fuel (SNF) transport cask in drop situation that is included in transport accident scenarios. The safety of the drop situation is affected by the impact absorption performance of impact limiters. Therefore, when designing an impact limiter, the uncertainty in the material properties that affect the impact absorption performance must be considered. In this study, the material properties of the wood inside the impact limiter were selected as the variables for a parametric study. The sensitivity analysis of the drop response of the SNF transport cask with impact limiter was performed. The minimum wood strength required to prevent a direct collision between the cask and floor was derived from the analysis results. In addition, the plastic strain response was analyzed and strain-based evaluation was performed. Based on this result, the critical values of wood properties that change the impact dynamic characteristics were investigated. Finally, the optimal material properties of wood were obtained to secure the structural safety of the SNF transport cask. The results of this study can contribute to the development of SNF transport cask, thereby ensuring safety in transport accident conditions.

• 한국항공우주학회지
• /
• 제37권1호
• /
• pp.99-104
• /
• 2009

본 연구에서는 스마트 무인기와 같은 소형 항공기 착륙 장치 낙하특성을 해석하고, 충격흡수효율 최적화를 위한 오리피스의 최적설계를 수행하였다. 스마트 무인기의 착륙장치의 방식은 미터링 핀이 없는 단순 유공압(oleo-pneumatic) 방식을 사용한다. 이 착륙장치를 상용 프로그램인 MSC ADAMS를 이용하여 모델링하였다. 해석 모델의 적합성을 확인하기 위해 해석된 결과와 시험 결과와 비교 검증 하였다. 해석 결과와 시험 결과는 잘 일치하였으며, 이를 통해 해석 모델이 본 낙하해석에 적합하게 모델링 되었음을 확인하였다. 검증된 해석 모델을 적용한 후, 오리피스의 크기를 변경하여 해석함으로써 가장 높은 효율을 가지는 최적의 오리피스 크기를 결정하였다.

• 한국임상보건과학회지
• /
• 제5권4호
• /
• pp.991-997
• /
• 2017

Purpose. The purpose of this study was to muscle properties analysis of SCM(sternocleidomastoid) Muscle according to posture type when using smartphone. Methods. This study was conducted on 73 college students who are using smartphone. Subjects were analyzed myotonPRO to confirm, prone posture group, stand posture group, drop head above $45^{\circ}$in sit posture on a chair group and drop head below $45^{\circ}$in sit posture on a chair group were measured SCM muscle. The myotonPRO were measured one measurer, total 3 times. Comparative analysis of the each groups were investigated of SCM muscle properties. Results. We found that Frequency, Stiffness, Creep and Relaxation were appeared difference in each posture. F index was increased at drop head below $45^{\circ}$group than stand posture group. S index was increased at drop head above $45^{\circ}$group than prone posture group. C index was decreased at drop head below $45^{\circ}$group and drop head above $45^{\circ}$group than prone posture group. R index was decreased at drop head above $45^{\circ}$group than prone posture group. Conclusions. The muscle properties were appeared difference in each posture of SCM muscle using smartphone.

• 대한기계학회논문집A
• /
• 제34권11호
• /
• pp.1733-1740
• /
• 2010

대형 드럼세탁기의 낙하 충격에 대한 포장재의 동적 거동 분석을 수행하였다. 해석에는 충격 해석에 널리 쓰이고 있는 LS-DYNA를 사용하였으며, 자유 낙하 시의 충격 가속도와 유효 응력, 그리고 고속 카메라를 통한 포장재 압축 변형 비교를 통해 해석 결과의 신뢰성을 검증하였다. 완충 특성 및 포장재 구조 에 대한 파라미터 분석을 통해 기존 포장 구조에 대한 설계 개선안을 도출하였으며, 유통 시험을 통해 유효성을 검증하였다. 본 연구에서 사용한 해석 기법 및 분석 방법 등을 통해, 향후 드럼 세탁기의 완충 성능 및 재료비 개선에 효과적으로 기여할 수 있을 것으로 기대된다.

• 설비공학논문집
• /
• 제12권9호
• /
• pp.870-878
• /
• 2000

An experimental study and a modeling are peformed to investigate the pressure drop of combining junctions in two-phase flows. Experiments on tripod geometry used in a condenser or an evaporator, are conducted with inlet mass fluxes from 200 to$ 400 kg/m^2$s, and pipe diameters of 7 m and 9.52 m. The working fluid is R22. The result shows that the pressure drop increases as the quality does, but the effect of the increase of the pressure decreases when the diameter of a pipe increases. When the mass flux increases, the pressure drop linearly does. Furthermore, when the pipe diameter decreases, the pressure drop has a quadratic increase.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.478-481
• /
• 1991

This paper discusses the principle and structure of instantaneous voltage drop compensator, which protects damage from instantaneous voltage drop in systems such as computer, variable speed drive, high voltage discharge-lamp, magnet switch. When instantaneous voltage drop occurs, control circuits detect it, then produce output voltage the same as normal condition voltage. Instantaneous voltage drop compensator has condenser bank as energy storage component, so system can be made small, light weight compared with UPS. In normal state, utility source transfers power, and in instantaneous voltage drop state, the energy of condenser bank transfers power through inverter, so high efficiency, compact, and especially low cost system can be manufactured.

• 한국분무공학회지
• /
• 제3권2호
• /
• pp.1-13
• /
• 1998

A theoretical and experimental study was carried out to predict the drop size distribution of the pressure swirl atomizer. Various analytical methods using the Kelvin-Helmholtz instability theory were tried to examine the wave growth on cylindrical liquid sheets. Cylinderical liquid sheets were extended to the case with the conical sheets. Perturbations due to tangential motion as well as longitudinal one were taken into account. And it was assumed that the breakup occurs when amplitude ratio exceeds exp(12), drop sizes were predicted only by theoretical approach. Drop size distribution was obtained by using maximum entropy formalism. Seven constraints in the form of the definition of mean diameter were used in this formulation in order to avoid the difficulties of estimating source terms. In this study $D_{10}$ only was introduced into the formulation as a constraint. The predicted drop size and drop size distribution agreed well with the measured data.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.250-254
• /
• 2011

Main role of landing gear is to absorb the energy which is generated by aircraft lanidng and ground maneuvering. Generally, in order to absorb the impact energy during landing, oleo-pneumatic type shock absorber is used for aircraft landing gear. Oleo-pneumatic type shock absorber has a good energy absorbing efficiency and is light in weight because its structure is relatively simple. For the landing gear development, it is necessary to conduct drop test in order to verify shock absorbing performance. In the drop test, first, gas spring curve verification tests are conducted. Then, limit and reserve energy absorption drop tests are performed based on the STANAG 4671. The drop tests results with performance analysis results are presented.