• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.309-312
• /
• 1996

In view of physical mechanics, unicycle's dynamical system is a very sensitive system. Mechanical unicycle's structure has mechanical components of wheel, body frame, driving actuator and several mechanical elements. Mechanical unicycle is closed link system. Each component is chained with the others. For design of unicycle robot. we must decide the sizes, masses, positions of mechanical components throughout kinematics and kinetics analysis of unicycle robot. In this paper, we analized driving and closed link mechanism of unicycle robot

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1934-1944
• /
• 2017

As a key component of high-voltage power conversion system for electric vehicles (EVs), bidirectional DC/DC (Bi-DC/DC) is required to have high efficiency and light weight. Conventional design methods optimize the Bi-DC/DC at the maximum power dissipation point (MPDP). For EVs application, the work condition of the Bi-DC/DC is not strict as the MPDP, where the design method using MPDP may not be optimal during travel of EVs. This paper optimizes the Bi-DC/DC converter targeting efficiency and weight based on the driving cycle. By analyzing the two-phase interleaved Bi-DC/DC for hybrid energy storage systems (HESS) of EVs, its power dissipation is calculated, and an efficiency model is derived. On this basis, weight models of capacitor, inductor and heat sink are built, as well as a dynamic temperature model of heat sink. Based on these models, a method using New European Driving Cycle (NEDC) for optimal design of Bi-DC/DC which simultaneously considered efficiency and weight is proposed. The simulation result shows that compare with conventional optimization methods revealed that the optimization approach based on driving cycle allowed significant weight reduction while meeting the efficiency requirements.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.996-1002
• /
• 2013

This study addresses the development of a full duplex robotic system for transferring flat-panel display glass. We propose to accomplish this using a bidirectional linear transfer mechanism in place of the conventional rotary transfer mechanism. The developed full duplex robot comprises a driving part that carries the glass panel laterally, vertical part that can be moved up and down by means of a ball screw and linear motion guide arrangement, and hand part that slides by the cylinder of the driving part along the guide rail with a V-guide bearing attached to the bottom of the support. In addition, an alignment part prevents the hand part from derailing and holds the hand part while the driving part moves horizontally. The full duplex robot lifts and drives a glass panel directly while transferring it to the buffer and does not require rotational motion. Therefore, both transferring and stacking are realized with a single device. This device can be used in existing industrial facilities as an alternative to existing industrial robots in current as well as future process lines. The proposed full duplex robot is expected to save considerable amounts of time and space, and increase product throughput.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.159-165
• /
• 2010

본 논문에서는 원격제어기반 이동체 감지 및 변형 퍼스널 로봇시스템을 설계 및 구현하고 성능을 분석하였다. 설계에 있어서 중점적으로 고려한 사항은 퍼스널 로봇의 버튼기반 및 원격제어방식 설계, 휠 주행모드/보행모드/자동 주행모드/감시모드의 동작모드 설계, 원격제어기능 설계, 주변환경 변화감지 기능 설계, 모션데이터 추출기법 설계, 장애물 탐지기법 설계이다. 개발한 퍼스널 로봇은 언제 어디서나 원격지에서 인터넷과 접속하여 로봇의 동작 및 영상인식을 제어하여 주변 환경변화를 감지하는 이동체 감지 및 4가지의 변형이 가능하다. 또한 실험결과, 실내의 문턱이나 전선등으로 이루어진 지형의 요철을 다리 관절로 이동 가능하며, 자동 주행모드로 진행 할 경우 30cm*30cm 공간의 장애물 환경에서 3개의 적외선 센서를 이용하여 장애물을 성공적으로 벗어남을 확인하였다.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2005년도 춘계 학술발표대회 논문집
• /
• pp.72-73
• /
• 2005

• 동력기계공학회지
• /
• 제16권2호
• /
• pp.60-65
• /
• 2012

Pneumatic actuators are clean, lightweight, and can be easily serviced, whereas low energy efficiency has been considered as a critical shortcoming compared with corresponding hydraulic and electrical actuators. This study describes a new design method of pneumatic cylinder driving apparatus by lowering a supply pressure. The simulation study demonstrates that the designed system with the proposed method can operate at the smaller energy consumption state compare to the designed system with the conventional method for the specified working conditions.

• 대한기계학회논문집A
• /
• 제38권7호
• /
• pp.799-807
• /
• 2014

본 논문에서는 가용공간이 적은 실내에서의 사용을 중점으로 한 새로운 방식의 구동방식을 갖는 전동 볼체어의 개발을 소개하고자 한다. 볼체어의 가장 큰 특징은 크게 두 가지로 나뉜다. 첫째는, 구조적 특징으로서 부피와 무게를 최소화하기 위해 원형에 가까운 모양의 팔각형 외골격 프레임 설계를 수행하였고, 공을 포함한 모든 구동부가 로봇 내부에 장착되어 크기뿐만 아니라 사용안전성 면에서 실내용으로 적합하도록 설계하였다. 둘째는, 구동 메커니즘의 특징으로서 볼마우스의 동작 원리를 역발상하여 로봇의 구동방식에 적용하였다. x축, y축의 회전을 담당하는 두 개의 옴니휠이 공을 굴리는 방식으로 각각 모터의 속도를 제어하여 두 개의 바퀴만으로 전 방향 구동이 가능한 홀로노믹 시스템을 구현하였다. 이러한 두 가지의 특징으로부터 볼체어가 좁은 이동 공간에서 전방위 이동을 효과적으로 수행할 수 있음을 실험적으로 구현하였으며, 본 로봇의 자세한 개발 과정을 본 논문에 서술하였다.

• 동력기계공학회지
• /
• 제12권3호
• /
• pp.38-43
• /
• 2008

The usage of electric forklift truck is gradually increasing due to the convenience at conveying and arranging the materials in the industrial field. In this study, the author designed and suggested the optimum driving system and load tester which both of them are the most important part of the forklift truck. The planetary gear is chose to driving system because it makes big power even though the motor size is small. The gear teeth of planetary gear were designed and the designed planetary gear was tested considering the yield strength and the abrasion of gear teeth. The B-Type electric brake which consists of multiple plates and operates with non-magnetic type was connected with a single shaft in the driving system. So, it can be applied at the sudden braking situation which has the torque increment. And it has the compact size and excellent durability Load tester can give the various levels of load to the planetary gear of driving system in the electric forklift truck and it can also measure the levels of the load which were applied. Therefore, we can measure the noise, torque and perform the durability, vibration tests using load tester. It will be economical because many kinds of test can be performed using reasonable priced load tester The driving system of electric forklift truck which has sufficient competitive can be manufactured using our designed planetary gear reducer with reasonable price. The designed load tester can use for checking the performance of other reducers, as well.

• 드라이브 ㆍ 컨트롤
• /
• 제15권2호
• /
• pp.22-31
• /
• 2018

This study deals with verifying the design feasibility, of an independently driving hydraulic system for disaster response purposes, through an analytical approach. The development target is a system in which four traveling motors are driven independently, and must be easy to operate even under conditions in which different loads are applied to the traveling motors. In order to be suitable for complex work, the hydraulic system was designed using the main control valve with a pressure compensation function. If we can develop an analytical model that reflects the specifications and functions of the parts through the analysis program, we can verify the validity of the design before we make the prototype. The purpose of this study therefore, is to verify the feasibility of designing an independent drive hydraulic system through the development of an analysis model from the viewpoint of complex work. The analysis program uses Simulation X.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.362-368
• /
• 2017

The endurance test is important to evaluate and predict defects of the vehicles. In particular, in order to improve the reliability of the endurance test for the powertrain system of military vehicles, the driving load is measured and analyzed at test courses and maneuvering roads. As a result, new test courses for powertrain system is additionally needed to improve test reliability. In this paper, it shows that new test courses for powertrain system is designed and constructed using the measuring and anlayzing result between CPG test courses and army maneuvering roads.