• Journal of the Ergonomics Society of Korea
• /
• v.30 no.1
• /
• pp.213-220
• /
• 2011

Objective: The aim of this study was to investigate middle-aged drivers' driving performance and heart-rate as the behavior and physiological changes due to intersection types in left-turn situation. Background: In Korea, the drivers were aged 40~50s are most plentiful. In addition, the intersection traffic accidents are increasing every year. However, the researches for middle-aged drivers and intersection environments have been little. Method: In this study, three kinds of left-turning intersection types(T1, T2, T3) was used as the within-subject independent variables, three age groups(young, middle-aged, elderly) was used as the between-subject independent variables. Also, passing time, approaching velocity, speed and steering variations and heart-rate were used as dependent variables. Results: Overall, middle-aged drivers' driving behaviors were similar to those of the younger drivers. At the T2 intersection type, however, the approaching velocity of middle-aged drivers was similar to younger drivers, whereas the passing time of middle-aged drivers was similar to elderly drivers. Conclusion: These results could be interpreted that a transition driving behavior of middle-aged drivers in terms of age would be appeared on the T2 intersection type. Application: The results might help to understand the characteristics of driving behavior for middle-aged drivers.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.690-696
• /
• 2011

A number of conventional railway bridge is more than 2600. Non-ballast plate girder bridge is about 700 and this is 27% of all bridge numbers. Non-ballast plate girder has advantages that self load is more lighter than moving load and construction cost is more inexpensive than concrete bridge. But non-ballast plate girder has disadvantages that vibration and noise is bigger than concrete bridge. This study had analyzed behavior of non-ballast plate girder according to the arrangement of supports and driving conditions to review the proper arrangement of support. Measurements were performed in single line and disel locomotive of 7400type were used as test vehicle. The vehicle's driving conditions are as follows; Change of driving direction, Constant speed driving, Deceleration driving, Acceleration driving. Main measurement contents were horizontal displacement and vertical vibration acceleration in girder of vicinity support. Results of measurement are as follows; In case that a vehicle drives from fixed support to movable support, vertical vibration acceleration of the girder was smaller than opposition case.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.46-55
• /
• 2006

There are many kinds of braced cut wall methods as the sheet pile, SCW, CIP and slurry wall which is adoptable for a deep excavation construction in a coastal filled land. The braced cut wall which has a strong stiffness is very stable but it has the weak point that the construction cost is high. Thus when a braced cut wall is designed, the geotechnical engineers choose the braced cut wall which has more safe and economic in the consideration of surrounding buildings near the construction site. Especially, when the sheet pile method as a braced cut wall is cheesed, the layer order and consistence of a coastal deposit stratum are considered and the pile driving method is also considered. This paper introduces the case that the originally box-type sheet pile wall was changed to U-type and high strength material after the pilot test at the subway construction site in a coastal filled land. This paper also introduces the case that the sheet pile's driving method was changed to special method in the section of the temporary coffer dam which had made when the present coastal filled land was formed.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.353-358
• /
• 2001

Turbo-charging or Super-charging has been used to boost engine power for Gasoline Engine and Diesel Engine came to the world at the beginning of $20^{th}$ century. So far Turbo-Charger has enjoyed a high reputation in the charging filed for its technical advantages such as no demand of operation power from engine and an excellent charging effect in the event of a static operation at mid- and high engine speed. A mechanically driven Super-Charger, however, is now emerging in order to meet demands of the age of speed such as high engine power for a quick change of the driving mode - high engine torque even at low engine speed. Since Super-Charger needs driving power from engine, it cannot improve its relatively higher fuel consumption against that of Turbo-Charger. This negative point is still an obstacle to the wide use of Super-Charger. Super-Charger using Screw-type compressor which has already had a considerable base in air compressor market will fulfill this purpose of improving fuel consumption by minimizing operation power owing to no charging at idling or partially loading driving. This study aims to develop power control concept to achieve this minimization of operation power.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.2
• /
• pp.129-135
• /
• 2011

Dry CVT(Continuously variable transmission) consists of a driving pulley and a driven pulley joined by rubber V-belt. Each pulley consists of a fixed flange and a movable flange. The movable flange of the driving pulley has the centrifugal roller and a ramp plate in the flange. The movable flange moves toward a fixed flange under the actuation of a centrifugal roller, as the driving pulley speed increases. The main advantages of the Dry CVT with V-belt, which has been popular in Asia, are a simple mechanism, less maintenance and low cost. The important claim which have an influence on the performance of the Dry CVT is the wear of the centrifugal roller. In this study ball type is proposed instead of roller type of movable flange to resolve claim. Also experiments are carried out for new model to evaluate performances.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.6
• /
• pp.83-89
• /
• 1997

In order to study on fatigue crack retardation and retardation mechanism in variable loading, the effects of crack tip branching in fatigue crack growth retardation were examined. The characteristics of crack tip banching behavior was considered to micro structure. It was examined that the variation of crack tip branching angle. Crack tip branching was observed along the grain boundary of ferrite and pearlite structure. It was found that the abanching angle ranges from 25 to 53 degrees. Using the finite element method, the variable of crack driving force to branching angle was examined. The effective crack driving force ( $K_{\eff}$ ) decreased as the braching angle increases. The rate of decrease was 33% for the kinked type and 29% for the forked one. It was confirmed that the effect of crack tip branching is a very important factor in fatigue crack growth retardation. Therefore, crack branching effect should be considered building the hypoth- etical model to predict crack growth retardation.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.13 no.2
• /
• pp.87-100
• /
• 2009

Hedging strategy for European option of jump-type semimartingale asset model, which is derived from stochastic differential equation whose driving process is a jump-type semimartingle, is discussed.

• Korean Journal of Culture and Social Issue
• /
• v.22 no.1
• /
• pp.19-39
• /
• 2016

Though research has shown that public transportation drivers experience greater burnout than other drivers, the sources of their burnout and possible mediators remain largely unknown. In response, in this study we investigate the relationships among sensation seeking, Type A driving behavior, and meaning of work to elucidate the burnout experienced by bus drivers in Gyeonggi-do, South Korea. To collect data regarding these relationships, 188 bus drivers answered a questionnaire involving the sensation seeking scale, burnout scale, and meaning of work scale. Results showed that Type A driving behavior mediated the relationship between sensation seeking and burnout, while meaning of work moderated the mediated model. These findings demonstrate that sensation-seeking bus drivers tend to experience greater burnout given their tendency to exhibit Type A driving behavior, and this relationship depends on perceived meaning of work. This study therefore contributes meaningful information and outlines significant implications in understanding drivers' burnout.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.2
• /
• pp.87-97
• /
• 2018

Bus, a major transportation mode, doesn't have a systematical evaluation system for dangerous driving behavior yet. This paper analyzes the characteristics and pattern of bus driving behavior using Digital Tacho Graph(DTG) data on express bus. 8 types of dangerous driving behavior were considered according to timeslot, the day of week and weather condition. As results, rapid acceleration, rapid left right turn and rapid deceleratio accounted for more than 97% and relatively high percentages were shown in dawn, on Friday and on the clear day, respectively. From the statistical analysis, correlation between the dangerous driving types and difference according the timeslot were found, and 3 groups considering the level of the dangerous driving were suggested. This study contributes to setting an efficient and reliable eduction system for using driving simulators.

• Journal of Animal Science and Technology
• /
• v.65 no.4
• /
• pp.878-889
• /
• 2023

Animal welfare during transport became an largely issue because of increasing demand for improved animal welfare standards. Most studies on the animal welfare during transportation have concentrated on the atmosphere and the temperature of the truck compartments. Thus, the objective of study was to collect and quantify three axis acceleration and determine the effect of bedding for transporting pigs from farm to slaughterhouse. A total of 2,840 crossbred fattening pigs with a live weight of approximately 115 kg were used. They were raised in the same commercial farms and transported to the same commercial slaughterhouse. A 3×2×2 completely randomized factorial design was used to investigate effects of rubber type bedding (bedding or non-bedding) and two levels of driving style (aggressive or normal) in three different time periods with different outside temperatures. Air temperature treatments were as follow: high temperature ([HT] higher than 24℃); low temperature ([LT] lower than 10℃); normal temperature ([NT] 10℃ to 24℃). In our experiment, pigs transported under aggressive driving style showed lower (p < 0.05) pH and water holding capacity (WHC) than those transported under normal driving style. Pigs transported under normal driving style showed a lower percentage of drip loss (DL) (p < 0.05) than those transported with an aggressive driving style. Also, transported with bedding showed higher (p < 0.05) lying behavior but lower (p < 0.05) sitting behavior than those transported without bedding. Pigs transported under normal driving style showed lower (p < 0.05) cortisol level than those transported under aggressive driving style. In conclusion, aggressive driving style cause acute stress in pigs, while bedding helps alleviate acute stress in pigs during transportation in LT.