• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.3
• /
• pp.165-173
• /
• 2013

Core loss has a major effect on heat generation in synchronous motors with surface-mounted permanent magnets (SPMs). It is essential to perform heat transfer analysis considering core loss in SPM because core loss is seriously affected by torque and speed of motors. In the present study, mechanical loss, core loss and coil loss are evaluated by measuring input and output energies under various driving conditions. For a better understanding heat transfer paths in synchronous motors, we developed a lumped thermal system analysis model. Subsequently, heat transfer analysis has been performed based on acquired energy loss, temperature data and thermal resistance with three types of SPM. It is shown that the torque constants decrease by Max. 10% as speed increase. At the rated torque, the core loss is Max. 10.9 times greater than the coil loss and the hysteresis loss of magnets is dominant in total loss.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.4
• /
• pp.55-63
• /
• 2018

In recent years, with the growing interest in electric vehicles, the development of a Neighborhood Electronic Vehicle (NEV) made for urban driving is accelerating. Existing NEVs are set to ~0.3 - 0.35 with more emphasis on performance rather than minimizing air resistance. In this paper, a NEV with a streamlined car body is proposed. The shape of dolphins and sharks was applied to the car body to minimize the air resistance generated when driving. Also, the performance of the vehicle was estimated by calculating the traction force and the roll couple, etc. To check the drag coefficient of the car body, finite element analysis software (COMSOL Multiphysics) was used. The frame of the vehicle is divided into the forward and the rear parts. Carbon pipe is used for the frame by MIG welding. The car body of the vehicle was fabricated by forming carbon fiber. This study confirmed the general possibility of using NEVs through driving experiments.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1994.09a
• /
• pp.79-86
• /
• 1994

Two case studies on the application of Pile Driving Analyzer (PDA) are introduced. It is shown that the PDA and CAPWAP are effective tools for the construction control of pile foundations with minimum cost and time. The PDA and CAPWAP techniques are able to evaluate the performace of hammer and driving system: to check the stresses in the pile due to driving: to determine the damage of pile: to predict the ultimate bearing capacity of pile: to estimate the important soil paramaters such as the soil resistance, quake, and damping etc.: and to provide the load - displacement curve from the simulated static load test. Theoretical backgrounds of wave mechanics is briefly reviewed and the methodology of construction control using the PDA is also discussed.

• Design & Manufacturing
• /
• v.8 no.1
• /
• pp.35-39
• /
• 2014

Window roller housings are durable because high-quality source materials such as stainless steel is used in making them. After a series of precise structure analysis, their design is optimized. They are subject to repetitive driving tests of more 100,000 times, durability tests, impact resistance tests, corrosion tests and others. For a long time, gaps often occur in press molded products owing to serious squareness deformation and flatness deformation of them. Severe burrs in press molded products require frequent grinding, which leads to short life cycle and rough or unreliable movement of assembled roller housing, which, in turn, causes product defects. This study focuses on developing measures to resolve existing defects and to improve lifespan of dies by designing and making a window roller shearing die.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.5
• /
• pp.14-20
• /
• 2020

In this study, the overall states of the airflow when a truck with or without side pairing is driven at a maximum speed of 90 km/h, regulated by domestic law, were investigated through computational fluid dynamics numerical analysis. All the tested models showed that the airflow went under the truck body; specifically, the air did not flow along the underside to the rear of the truck but through the sides of its underside. The drag with the drag coefficient at model 3 was clearly higher than those for the other two models. The results of this study could help to improve the truck performance by reducing its resistance against the air flown from it in driving itself.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.1
• /
• pp.36-42
• /
• 2020

In this study, flow analyses of a vehicle at driving were carried out after each installation of a tuning part, specifically the bonnet air ducts, the rear spoiler, and the rear diffuser. The study models were designed to comprise a total of eight cases in which each of the three parts were mounted individually or all together in vehicles. Assuming that the vehicle were driven with an average high speed of 100 km/h, the speed and pressure around the vehicle were obtained using CFD when driving. The rear diffuser that becomes the most effective among the three mounting parts has a major role in reducing air resistance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.327-330
• /
• 1999

In this paper, the electrical characteristics of λ vibration-mode piezoelectric transformer for applying to CCFL driving inverter was investigated. Piezoelectric transformer was made of PZT - PMN -0.5wt% N $b_2$ $O_{5}$ composition. As a results of the electrical characteristics of piezoelectric transformer, when applied voltage was 35[ $V_{rms}$] in 100[k$\Omega$] load resistance, output voltage was about 510[ $V_{rms}$] and output power was more than 2[W]. As output power increased, step-up ratio and temperature was very stable until output power was 2.5(W). Also, Efficiency was maximum in 70[k$\Omega$] load resistance, and about 89[%]. Also, when piezoelectric transformer was continuously driven for 10[hrs], output voltage and temperature change ratio was fess than 10[%], and very stable. Conclusively, piezoelectric transformer fabricated in this paper can be applied to piezoelectric inverter for CCFL driving.g.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.5
• /
• pp.545-551
• /
• 2022

We proposed a design method for constant current pyro squib circuit. The current method using N MOSFET for the stability problem has a weakness of the current change, requiring a new design. This paper identified the problem with conventional squib circuit where the current is reduced by 25 % when maximum resistance is 3 ohms. Thus, we proposed a stable constant current driving circuit using P MOSFET and PNP BJT. We confirmed stable constant circuit operation through simulations and measurements of the proposed circuit design where the current did not change until the resistance reached 3 ohms.

• Korean Journal of Culture and Social Issue
• /
• v.17 no.3
• /
• pp.305-320
• /
• 2011

The objectives of the present research are twofold. First, this research aims to compare the effect of trait characteristics(sensation seeking, social resistance and type-A behavior) with that of driving specific characteristics(driving anger and type-A driving) on problematic driving behavior. Second, the role of life stress as a mediator in the relationships between general trait characteristics and traffic safety index was examined. 1158 licensed commercial vehicle drivers were surveyed and their accident-related records were obtained in this research. Results showed that driving specific characteristics were significant indicators of traffic safety and life stress mediated the relationships between general trait characteristics and traffic safety index. These findings implicate that understanding drivers' driving specific characteristics and their levels of life stress is important to reduce problematic driving behaviors and enhance traffic safety.

• Journal of the korean Society of Automotive Engineers
• /
• v.8 no.3
• /
• pp.46-54
• /
• 1986

Driving pattern of gasoline passenger car was measured and analyzed at some areas(6urban area routes, 4 radial routes, 4 circular routes)in Seoul city. Measured items were vehicle speed, engine speed, intake manifold vacuum, and fuel consumption. Driving pattern data were reappearanced with engine dynamometer. Results of this investigation might be summarized as below; 1. When we compared urban area route with radial or circular route in rush hour, it was found that the average vehicle speed was measured to be lower about 25% and fuel consumption to be higher about 12% in urban area route. 2. Average vehicle speed was measured to be higher about 30% and driving resistance output to be higher about 25% in non-rush hour, but average fuel economy was increased a little. 3. On the bases of average fuel economy and characteristics of exhaust emissions, optimum driving vehicle speed was found about 60 km/h in the 4th(top)and about 40km/h in the 3rd in driving of experimental engine. 4. Idling frequency and exhaust emissions of CO,HC were related to idling closely. But exhaust emission of NOx, which had nothing to do with idling frequency, had relation to acceleration time ratio.