DOI QR코드

DOI QR Code

스포츠카의 에어로 파츠 설치에 따른 유동해석

Flow Analysis according to the Installation of an Aero Part in a Sports Car

  • 최계광 (공주대학교 금형설계공학과) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Choi, Kyekwang (Department of Metal Mold Design Engineering, Kongju National UNIV.) ;
  • Cho, Jaeung (Division of Mechanical and Automotive Engineering, Kongju National UNIV.)
  • 투고 : 2019.10.15
  • 심사 : 2019.11.11
  • 발행 : 2020.01.31

초록

In this study, flow analyses of a vehicle at driving were carried out after each installation of a tuning part, specifically the bonnet air ducts, the rear spoiler, and the rear diffuser. The study models were designed to comprise a total of eight cases in which each of the three parts were mounted individually or all together in vehicles. Assuming that the vehicle were driven with an average high speed of 100 km/h, the speed and pressure around the vehicle were obtained using CFD when driving. The rear diffuser that becomes the most effective among the three mounting parts has a major role in reducing air resistance.

키워드

참고문헌

  1. Kang, H. J., Kim, B. H., Kim, B. H. and Seo, J. H., "Structural Weld Strength Analysis on Door Hinge of Field Artillery Ammunition Support Vehicle," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 3, pp. 58-65, 2016. https://doi.org/10.14775/ksmpe.2016.15.3.058
  2. Yeo, D. H., Park, D. G. and Byon, S. M., "CFD Analysis on Stent Shape to Reduce Blood Flowing into Cerebral Aneurysm," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 1, pp. 42-50, 2017. https://doi.org/10.14775/ksmpe.2016.16.1.042
  3. Jun, C. W,, Sohn, J. H. and Yang, M. S., "Comparison of Fluid Modeling Methods Based on SPH and ISPH for a Buoy Design for a Wave Energy Converter," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 3, pp. 94-99, 2017.
  4. Ahn, K. C., Kim, B. H. and Lee, C. W., "Flow Analysis of Flowmeter for High-Viscosity Paint Spraying System", Journal of the Korean Society of Mechanical Technology, Vol. 16, No. 4, pp. 1709-1714, 2014. https://doi.org/10.17958/ksmt.16.4.201408.1709
  5. Lee, D. R., "Flow Analysis of a Thermopneumatic Micropump For Different Shapes of PDMS Membrane", Journal of the Korean Society of Mechanical Technology, Vol. 17, No. 2, pp. 245-250, 2015. https://doi.org/10.17958/ksmt.17.2.201504.245
  6. Lee, H. C. and Cho, J. U., "A Study on Air Flow Analysis due to the Shape of Automotive Body", Journal of the Korea Convergence Society, Vol. 5, No. 2, pp. 19-23, 2014. https://doi.org/10.15207/JKCS.2014.5.2.019
  7. Lee, H. C. and Cho, J. U., "Study of the Shape of Car Body Affecting Flow Resistance of Air Flowing Near Car", Journal of the Korea Academia-Industrial cooperation Society, Vol. 15, No. 8, pp. 4707-4712, 2014. https://doi.org/10.5762/KAIS.2014.15.8.4707
  8. Cho, J. U., "Flow Analysis of Air due to the Shapes of Motorbike," Journal of Korean Society of Mechanical Technology, Vol. 14, No. 1, pp. 53 - 60, 2012. https://doi.org/10.17958/ksmt.14.1.201202.53
  9. Cho, H. J., "Potential Flow Analysis around a Inlet Duct of a Water-jet Propulsion System", Journal of the Korean Society of Mechanical Technology, Vol. 16, No. 1, pp. 1149-1154, 2014. https://doi.org/10.17958/ksmt.16.1.201402.1149
  10. Kim, H. K. and Cho, H. M., "A Study on Comparative Analysis of Internal ECV Through Flow Analysis", Journal of the Korean Society of Mechanical Technology, Vol. 16, No. 1, pp. 1161-1166, 2014. https://doi.org/10.17958/ksmt.16.1.201402.1161
  11. Cho, J. U., "A Flow Analysis on Wing Shape of Cooling Fan at Automobile", Journal of the Korea Convergence Society, Vol. 5, No. 4, pp. 75-79, 2014. https://doi.org/10.15207/JKCS.2014.5.4.075
  12. Park, D. H. and Kwon, H. H., "Development of Automotive Seat Rail Parts for Improving Shape Fixability of Ultra High Strength Steel of 980MPa," Journal of the Korean Society of Manufacturing Process Engineer, Vol. 15, No. 5, pp. 137-144, 2016. https://doi.org/10.14775/ksmpe.2016.15.5.137