• 제목/요약/키워드: Driving Mode

검색결과 747건 처리시간 0.029초

서울시 도시형 버스의 추행패턴에 관한 연구 (A Study of Driving Pattern of City-bus in the City of Seoul)

  • 정남훈;이우택;선우명호;이영재;엄명도
    • 한국자동차공학회논문집
    • /
    • 제10권2호
    • /
    • pp.55-65
    • /
    • 2002
  • Emission from road traffic is one of the major sources of air pollution, and provides some undesirable effects on the atmspheric environment and human health. In the city of Seoul, the higher portion of diesel vehicles runs compared with that of other countries. Emission from the diesel vehicles is much higher than that of other vehicles. In this study, the driving pattern of city-bus in Seoul is investigated through on-road vehicle test and compared with the test modes of other countries in order to examine appropriateness of the present test mode that is taken in our country.

유한요소법을 이용한 모드변환형 초음파 모터의 해석 및 제작 (Analysis and Fabrication of the Mode Conversion Type Ultrasonic Motor Using Finite Element Method)

  • 이재형;박태곤
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 제5회 영호남 학술대회 논문집
    • /
    • pp.23-26
    • /
    • 2003
  • An ultrasonic motor is a motor which uses vibration -a type of elastic vibration- to obtain a driving force, which then drives the motor using friction. In this paper, mode conversion type - single resonance mode ultrasonic rotary motor that use langevin type ultrasonic vibrator was studied. This model was proposed for the first time by Japanese Kumada in 1985. In this study, finite element analysis (FEA) of a stator and bidirectional driving characteristic of a rotor was newly obtained. The amplitude and phase of displacement and elliptical trajectory of beam was confirmed by FEA The fabricated motor was operated to clockwise and counterclockwise in 40.8 [kHz] and 44.2 [kHz] respectively. But bidirectional driving characteristics did not coincide each other.

  • PDF

고속도로 주행 모우드의 개발연구 (Development of expressway mode)

  • 박선
    • 오토저널
    • /
    • 제6권1호
    • /
    • pp.63-70
    • /
    • 1984
  • The KIER expressway mode was constructed from actual speed-versus-time traces generated by an instrumented test car driven a variety of expressways. This mode reflects the correct proportion of operation on each of the six expressways and preserves the non-steady-state characteristics of real driving. The average speed of the mode is 79.43 km/h and the mode length is 16.22 km.

  • PDF

동적 시뮬레이터에서 속도와 운전 형태 변화에 따른 운전자의 감성 평가 (Assessment of the Drivers Sensibility due to the Changes on Speed and Driving Mode of a Vehicle in a Dynamic Simulator)

  • 정순철;민병찬;신미경;김철중
    • 산업경영시스템학회지
    • /
    • 제24권65호
    • /
    • pp.51-63
    • /
    • 2001
  • The present experiment investigated the possibility of evaluating of the human sensibility contingent on the speed and modes of driving using the responses from the autonomic nervous system, subjective assessments, Simulator Sickness (55) in dynamic simulator. The three conditions of the speed of driving were 40 $\pm$ 10 km/h, 100$\pm$10 km/h, 160 $\pm$ 10 km/h, and the participant was instructed to drive the car for three minutes on the elliptical track. It is programed in such a way that the modes of driving can be changed smoothly using road DB in Dynamic Simulator, and for signifying the change of the condition the road signs were used. The instruction was given to the participant to drive the car on the fixed speed of 20 km/h for 30 seconds, then to drive the car on sudden-start mode of driving from the 20 km/h to 160 km/h within 10 seconds. For the sudden-stop mode of driving, it was instructed that stop the car from the speed of 160km/h to 20km/h within 10 seconds when the subject see the road sign, then drive the car at the fixed speed of 20 km/h for 30 seconds. The results of the subjcetive assessment showed that the level of pleasantness and the tension was increased, and physiological response showed that the level of activity of the autonomic responses were also increased as the speed of the car increased. Also, for results on the driving modes showed that the level of pleasantness was highest for the sudden-stop, next highest was sudden-start, and the lowest was 20 km/h fixed speed condition for the subjective assessment, and tile order of the level of activation of the autonomic nervous system showed the same results as above. From the results of the present study it was concluded that the presentation and evaluation of the stimulus for the human sensitivity is possible in dynamic simulator.

  • PDF

LNG-디젤 혼소엔진의 성능 및 실차 적용성 연구 (A Study on Vehicle Application and Performance of LNG-Diesel Dual Fuel Engine)

  • 이석환;김홍석;조규백;홍순철;이진욱
    • 한국분무공학회지
    • /
    • 제16권2호
    • /
    • pp.97-103
    • /
    • 2011
  • The electronically controlled diesel engine was converted to dual fuel engine system. Test engine was set up for investigating the power output, thermal efficiency and emissions. ND 13-mode tests were employed for the engine test cycle. The emission result of dual fuel mode meets Euro-4 (K2006) regulation and the engine performance of dual fuel engine was comparable to the performance of diesel engine. To estimate economical efficiency, test vehicles have been operated on a certain driving route repeatedly. Fuel economy, maximum driving distance per refueling and driveability were examined on the road including free ways. Developed vehicle can be operated over 500 km with dual fuel mode and shows 80% of diesel substitution ratio. Driveability of dual fuel mode is similar with that of diesel mode.

하이브리드 자동차용 리튬배터리의 충전량, 용량감퇴, 저항감퇴 예측을 위한 슬라이딩 모드 관측기 설계 (The SOC, Capacity-fade, Resistance-fade Estimation Technique using Sliding Mode Observer for Hybrid Electric Vehicle Lithium Battery)

  • 김일송;이진국
    • 전기학회논문지
    • /
    • 제57권5호
    • /
    • pp.839-844
    • /
    • 2008
  • A novel state of health estimation method for hybrid electric vehicle lithium battery using sliding mode observer has been presented. A simple R-C circuit method has been used for the lithium battery modeling for the reduced calculation time and system resources due to the simple matrix operations. The modeling errors of simple model are compensated by the sliding mode observer. The design methodology for state of health estimation using dual sliding mode observer has been presented in step by step. The structure of the proposed system is simple and easy to implement, but it shows robust control property against modeling errors and temperature variations. The convergence of proposed observer system has been proved by the Lyapunov inequality equation and the performance of system has been verified by the sequence of urban dynamometer driving schedule test. The test results show the proposed observer system has superior tracking performance with reduced calculation time under the real driving environments.

Wide viewing angle and fast response time using novel vertical-alignment - 1/4 ${\pi}$ cell mode

  • Lee, Jeong-Ho;Seo, Dae-Shik;Kim, Hyang-Yul
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
    • /
    • pp.9-10
    • /
    • 2000
  • The wide viewing angle and fast response time characteristics of negative dielectric anisotropy nematic liquid crystal (NLC) using a novel vertical-alignment (VA) - 1/4 ${\pi}$ cell mode on a homeotropic alignment layer were investigated. Good voltage-transmittance curves and low driving voltage using the novel VA - 1/4 ${\pi}$ cell mode without a negative compensation film were obtained. The iso-viewing angle characteristics of NLC using the novel VA - 1/4 ${\pi}$ cell mode without a negative compensation film can be achieved. The fast response time of 24.4 ms in NLC was successfully measured. The iso-viewing angle, fast response time, and low driving voltage characteristics using the novel VA - 1/4 ${\pi}$ cell mode can be achieved.

  • PDF

새로운 VA-$\pi$ 셀 모드를 이용한 광시야각과 고속 응답에 관한 연구 (A Study on wide viewing angle and fast response time using new VA-$\pi$ cell mode)

  • 서대식;이정호
    • 한국전기전자재료학회논문지
    • /
    • 제13권4호
    • /
    • pp.332-336
    • /
    • 2000
  • We have developed a novel vertical-alignment(VA) -$\pi$ cell mode that provides a wide viewing angle and fast response times for nematic liquid crystal(NLC) with negative dielectric anisotropy on a homeotropic polymide(PI) surfaces. Good voltage-transmittance curves and low driving voltages were achieved with the new VA-$\pi$ cell mode without a negative compensation film. Iso-viewing angle characteristics using the new VA-$\pi$ cell mode without a negative compensation film was also successfully observed. As well a fast response time of 31.7 ms for a new VA-$\pi$ mode was measured. Consequently the iso-viewing angel fast response time and low driving voltage characteristics using a VA-$\pi$ cell can be achieved.

  • PDF

복합 재료와 형상 기억 합금 코일 스프링 구동기를 이용한 유연하게 변형 가능한 바퀴 로봇의 설계 및 제작 (Design and Fabrication of Soft Deformable Wheel Robot using Composite Materials and Shape Memory Alloy Coil Spring Actuators)

  • 고제성;이대영;김지석;김승원;조규진
    • 한국정밀공학회지
    • /
    • 제30권1호
    • /
    • pp.47-52
    • /
    • 2013
  • In order to operate a search and rescue robot in hazardous area, the robot requires high mobility and adaptable locomotion for moving in unpredictable environments. In this paper, we propose the deformable soft wheel robot that can produce three kinds of driving modes; caterpillar driving mode, normal wheel driving mode, legged-wheel driving mode. The robot changes its driving mode as it faces the various obstacles such as a small gap, stairs etc. Soft film and composite materials are used for fabrication of deformable wheel structure and Shape Memory Alloy (SMA) coil spring actuators are attached on the structure as an artificial muscle. Film lamination and an composite manufacturing process is introduced and the robot design is required to be modified and compromised to applying the manufacturing process. The prototype is developed and tested for verifying feasibility of the deformable wheel locomotion.

운송 및 엔터테인먼트용 로봇차량의 바운스 및 주행제어 실험 연구 (Experimental Studies on Bouncing and Driving Control of a Robotic Vehicle for Entertainment and Transportation)

  • 조성택;정슬
    • 한국지능시스템학회논문지
    • /
    • 제25권3호
    • /
    • pp.266-271
    • /
    • 2015
  • 본 논문은 오락과 운송의 목적으로 만들어진 로봇 차량의 주행과 바운싱 제어에 관해 소개한다. 로봇 차량은 2 바퀴로 균형을 유지하며 2명의 탑승자를 태울 수 있도록 만들어 졌다. 즐거움을 극대화하기 위해 균형제어 뿐만 아니라 바운싱 제어까지 구현하였다. 탑승자는 주행모드, 균형모드, 그리고 바운싱 모드를 선택할 수 있다. 균형제어와 바운싱 제어 그리고 주행제어를 실험하여 그 가능성을 확인하였다.