• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.53-55
• /
• 1993

This paper describes the development of a software that has the man expert knowledge, experience and inference. This software is helpful for selecting the motors and driving systems which are best fit for the applications. Developed software can automatically select the most reasonable motor driving systems, only if a semi-skilled engineer inputs the performance criteria for the applications and mechanical data. Expert system inference engine and knowledge-base are implemented by C programming language. Data-base was implemented from manufacturer's catalogues for DC motors and brushless DC motors. Efficiencies of the various motor driving systems are compared reference on the average efficiency depends on the operating profiles. Developed expert system was tested in various of applications to verify the reliability, quick and easy selecting of the motor driving systems.

• Journal of Information Display
• /
• 제11권4호
• /
• pp.173-181
• /
• 2010

In this paper, light-emitting-diode (LED) backlight driving circuits and dimming method for medium-sized and large liquid crystal displays (LCDs) are proposed. The double loop control method, the intelligent-phase-shifted PWM dimming method, the fast-switching current regulator, and the current matching techniques are proposed to improve not only the current regulation characteristics and the power efficiency but also the current matching characteristics and the transient response of the LED current. The brightness of the backlight using the proposed local dimming method was determined from the histogram of the local block to reduce the power consumption of the backlight without image distortion. The measured maximum power efficiency of the LED backlight driving circuit for medium-sized LCDs was 90%, and the simulation results showed an 88% maximum power efficiency of the LED backlight driving circuit for large LCDs. The maximum backlight power-saving ratio of the proposed dimming method was 41.7% in the simulation with a high-contrast image. The experiment and simulation results showed that the performance of LEDs as LCD backlight units (BLUs) improved with the proposed circuits and method.

• 전자공학회논문지A
• /
• 제31A권7호
• /
• pp.110-116
• /
• 1994

In this paper a Duty Effective Overlap Scanning method (DEOS) for the improvement of driving efficiency of LC displays which have the RMS voltage responding characteristics is proposed and new processing method of data signals for optimum application of this method is also proposed. Proposed method has a few advantages such as the increment of duty ratio the increment of driving power loaded on LC cell and the decrement of RMS voltage error rate caused by signal attenuation on electrodes composing of display when compared with the conventional method which is called as optimum voltage amplitude selection method. And also by adopting new data signal processing method which has 3 kinds of voltage levels additional advantage much improving crosstalk phenomenon which is the most serious problems of simple matrix structured display is obtained. For the characteristic estimation new mathematical representation for new overlap scanning method and data signal processing method are induced and defined. And by the defined formula and simulation the characteristics of the proposed method and the conventional method are compared and analyzed. As a result of estimation this new method being able to optimize the overlap rate of scan signal and using 3 levels of data signals has the characteristic which can improve the driving efficiency of LC displays.

• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.7-13
• /
• 2011

The climate change due to the increased consumption with fossil fuel and rise of the oil price have been serious global issues. Automobile industry consumes 30% of the oil every year and causes air pollution and global warming by the exhaust emissions and carbon dioxide ($CO_2$). The demand of two-wheeled vehicle increases every year due to the parking and traffic problem caused by the increased automobiles in the urban area. Approximately 50,000,000 two-wheeled vehicles were produced in 2008. The development and sales of the hybrid two-wheeled vehicle industry become active due to its increased market demands. In this paper, the change of the motor and battery efficiency, driving distance, hill climbing ability with the change of the motor capacity was analyzed. Simulation of the peculiarities in urban driving schedule(World-wide Motorcycle Test Cycle(WMTC), Manhattan driving schedule), constant speed(10 km/h, 35 km/h) of small electronic two-wheeled vehicle was also carried out. Through the simulation result, appropriate capacities of the motor and battery for urban driving was acquired.

• 전기학회논문지
• /
• 제66권10호
• /
• pp.1540-1546
• /
• 2017

In piezoelectric device applications, it is important to improve a system efficiency because of the low generated power. In this paper, an optimal driving method is proposed to improve a system efficiency for a piezoelectric energy harvesting system. The proposed method considers disappear energy in input capacitors and the converter efficiency according to the input voltage magnitude to minimize energy losses. Experimental results based on various energy generation cases verify that the proposed method significantly improves the system efficiency; the efficiency is approximately 9.97% higher than that of the conventional method.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권10호
• /
• pp.458-463
• /
• 2003

In order to develope piezoelectric transformer for the ballast of fluorescent lamp, a new shape and electrode pattern of piezoelectric transformer has been investigated in this work. The composition of piezoelectric ceramics was 0.95Pb(Zr$_{0.51}$Ti$_{0.49}$)O$_3$+0.03Pb(Mn$_{1}$3/Nb$_{2}$3/)O$_3$+0.02Pb(Sb$_{1}$2/Nb$_{1}$2/)O$_3$. The sample prepared by this composition system showed the characteristics which has about 1200 of relative dielecric constant, 1100 of the mechanical quality factor, 0.53 of the electromechanical coupling coefficient, 320 pC/N of the piezoelectric constant d$_{33}$, 0.3 % of the dissipation factor. Diameter and thickness of disk-type piezoelectric transformer was 45 mm and 4 mm, respectively. The driving and generating electrode with their gap of 1mm were fabricated on the top surface. But the common electrode was fabricated on the whole bottom surface. The electrode surface ratio of driving and generating part on the top surface ranges from 1.4:1 to 3:1. We investigated the electrical characteristics with the variation of the electrode surface ratio of driving and generating part in the range of load resistance of 100 $\Omega$～70 k$\Omega$. The set-up voltage ratio of this piezoelectric transformer increases with increasing both the electrode surface of driving part and the load resistance. The set-up voltage ratio at no load resistance was more than 60 times. On the other hand, the efficiency decreases with increasing the electrode surface of driving part. In the case of the electrode surface of both 1.4:1 and 2:1, maximum efficiency showed above 97 % at load resistance of 2 k$\Omega$. However, in the case of the electrode surface of 3:1, maximum efficiency showed about 94 % at load resistance of 3 k$\Omega$.>.>.>.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.674-677
• /
• 2000

Operational principles and driving characteristics of two well-known energy recovery circuits for ac plasma display panels Weber and Sakai circuits are investigated Efficiency of two circuits is analyzed by comparing the in put current of the circuits with different operating conditions. Driving characteristics of the Weber circuit are studied when the magnitude and pulse width of the driving boltage very.

• 대한교통학회지
• /
• 제36권3호
• /
• pp.169-183
• /
• 2018

공격운전은 주변차량 운전자를 위협하며 주행하기 때문에 교통사고 발생 개연성이 높다. 따라서 공격운전의 법제도 마련, 검지, 관리방안 등 대책이 필요하다. 본 연구의 목적은 공격운전의 주행행태가 교통류에 미치는 영향을 분석하였다. Multi-agent 주행 시뮬레이션과 교통류 시뮬레이션 VISSIM을 이용하여 공격운전의 거동을 구현하였다. 교통류 시뮬레이션과 상충분석을 이용하여 공격운전이 교통운영효율성 및 교통안전성 측면에서 교통류에 미치는 영향을 분석하였다. 분석 시나리오는 다양한 교통상황과 공격운전차량 비율을 고려하여 설정하였다. 상충분석 결과 일반적으로 공격운전 주행행태는 교통안전성을 감소시키는 것으로 나타났다. 교통운영효율성 분석결과 흥미로운 점은 서비스 수준 A, B, C 경우 공격운전차량 비율이 증가할수록 평균주행속도가 증가하였다. 이와 반대로 서비스 수준 D와 E인 경우 공격운전차량 비율이 증가할수록 평균주행속도가 감소하였다. 본 연구 결과는 공격운전을 줄이기 위한 교통안전정책 마련 시 기초자료로서 효과적으로 활용될 수 있을 것으로 기대된다.

• 전자공학회논문지
• /
• 제51권2호
• /
• pp.168-172
• /
• 2014

교류형 플라즈마 디스플레이에서 유지기간 중에 자기소거 방전을 발생시켜서 휘도효율을 향상시키기 위한 새로운 유지 구동방법이 제안된다. 일반적인 AC PDP에서 하나의 서브필드 시간은 초기화, 기입, 유지기간으로 나누어져 있다. 그 중 유지기간 동안에 2개의 상판 전극인 X와 Y 전극에 교대로 사각 유지파형이 인가되어 화상을 표시하기 위한 유지기간 중의 플라즈마 방전이 연속적으로 발생된다. 그러나 일반적인 구동방법에 있어서 하판의 A전극에는 기입기간에서 종래의 구동방법에서는 셀을 선택할 때만 기입파형이 구동되고 유지기간 중에는 접지 상태로 놓여있으므로 유지 방전에 관여하지 않는다. 본 실험에서는 유지기간 중에 자기소거 방전을 발생시켜 휘도효율을 상승시키기 위하여 유지펄스의 뒷부분에서 음의 펄스를 A전극에 인가하였다. A전극의 음의 펄스는 주 유지방전이 발생된 후 셀 내부의 공간전하들을 벽전하로 전환시켜서 3전극의 전위가 접지 상태가 될 때 재 축적된 벽전하로 인하여 방전을 한번 더 유도시켰다. 그 결과, 유지기간 중 A 전극의 전압 높이에 따른 휘도 효율을 측정하였고 최적의 구동전압을 적용했을 때 휘도효율을 측정한 결과 종래와 비교해서 약 40 % 향상되었다.

• 한국안전학회지
• /
• 제28권2호
• /
• pp.6-13
• /
• 2013

This study focuses on finding ECO driving patterns which consider driving safety of the ATO system train and reliability and which optimize efficiency of the driving energy consumption. Research results derived by performing simulation of those 5 models show that the emergency braking which affects safety of passenger and the machinery is minimized, and safe driving speed is maintained by the prohibition of drastic acceleration/deceleration, coasting and constant-speed driving. Therefore if this result is applied to the urban railway train by amending or making ATO program to save energy usage that improve environmental quality, its effects as ECO driving pattern is huge.