• The Journal of the Korea Contents Association
• /
• v.14 no.9
• /
• pp.45-53
• /
• 2014

In this study, we analyzed the next generation ITS (C-ITS) technology trends, focusing on the national and international C-ITS projects. Based on the promotion practices of developed countries, we pointed out the lack of linkages with the existing ITS infrastructure. As a way to overcome this problem, we proposed the three-direction to enable the existing ITS infrastructure corresponding to the C-ITS. First one is developing a technique to improve the performance of the existing ITS infrastructure and automate the performance management (Performance-enhanced ITS). Second, developing active sensors or fusion sensor which along with V2X communication technology implement of an active safety driving support system (Safety-enhanced ITS). Third, we need to develop a technology that generate the new advanced traffic data by integrating the collected data from existing ITS infrastructure and nomadic device (Cloud-ITS). By improving the function of the existing ITS infrastructure for adaptation to the new V2X communication environment, we enhanced the efficiency of maintenance performance and would maximize the benefit of the introduction of C-ITS.

• The Journal of the Korea Contents Association
• /
• v.6 no.11
• /
• pp.317-326
• /
• 2006

By the rapid progress of U-IT(Ubiquitous Information Technology), a variety of national development policies have been devised on the basis of the utilization of the technology Above all things, a number of local governments are driving to construct a 3D GIS(Geographical Information System) that is as a infrastructure for the regional development which is including a u-City construction as a future city model, the competitiveness reinforcement of local governments, a reasonable means of urban management, etc. In this study we tried to find the fundamental direction of construction and utilization of 3D GIS in local governments. As the result of study, we suggested the advanced vision of 3D GIS has a role of treating the public affairs of local governments and of supporting the various private business scope.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.308-316
• /
• 2004

As we know that there are so many restrictions controlling the autonomous robot to turn and move in an indoor space. In this research, Ive adopted the concept ‘Omni-directional wheel’ as a driving equipment, which makes it possible for the robot to move in horizontal and diagonal directions. Most of all, we eliminated the slip error problem, which can occur when the system generates power by means of slip. In order to solve this problem, we developed a ‘slip error correction algorithm’. Following this program, whenever the robot moves in any directions, it defines its course by comparing pre-programmed direction and the current moving way, which can be decided by extracted image of floor line. Additionally, this robot also provides the limited security and service function. It detects the motion of vehicle, transmits pictures to multiple users and can be moved by simple order's. In this paper, we tried to propose a practical model which can be used in an office.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.461-466
• /
• 2020

In this study, the relationship between the track support stiffness and the track impact factor for a sleeper floating track and a turnout system with wood ties currently employed in Korean urban transit was assessed by performing field tests using actual vehicles running along the service lines. Field tests were performed on four track systems (i.e., sleeper floating track, and point, lead and crossing sections of turnout system). The theoretically designed track impact factor and track support stiffness were compared with the corresponding track impact factor and track support stiffness measured through field tests for the target tracks on the service line. The track impact factor for the service line appeared to increase with the deviation of track support stiffness according to vehicle driving direction; therefore, it was inferred that the deviation of track support stiffness between each track section directly affected the track impact factor.

• The Research Journal of the Costume Culture
• /
• v.23 no.1
• /
• pp.126-144
• /
• 2015

The object of this study is to develop textile designs and fashion products based on the cultural resource of Jeju Bangsatop, which means a stone tower preventing misfortune and driving out evil spirits. The field surveys of 32 Bangsatops located at 17 villages in Jeju were conducted. As a result, unlike stone towers located in other regions, Jeju Bangsatops made with basalt. In addition, wood and stone birds, Dolhareungbang, and other sculptures are built on the tops. Jeju Bangsatops were classified into four types based on the body form of the tops: Conical, truncated conical, trapezoid, and irregular shaped Bangsatops. Jeju Bangsatops located in a area or a village are symmetrically arranged in direction of south and north, left and right, east and west, or face to face. The conical, truncated conical, and irregular shaped Jeju Bangsatops which are designated as folk cultural properties or which have the unique sculptures of stone birds and the statues of Dolhareungbang built on the tops were selected as motifs for textile pattern design. The 4 basic patterns of Jeju Bangstops were designed. The six creative textile designs were developed by the various repeat arrangements of the basic patterns and were printed on oxford cotton fabrics by digital textile printing (DTP) method. The sixteen products of wallets, bags, hats and shoes were actually made with the DTP fabrics, the DTP fabrics which were naturally dyed in gray and blue colors, or the DTP fabrics which were redesigned with textile crayon. Therefore, it is confirmed that Jeju Bangsatop could be very useful as a motif for the development of cultural products focusing on Jeju tourism souvenir market.

• The KSFM Journal of Fluid Machinery
• /
• v.10 no.6
• /
• pp.7-16
• /
• 2007

An axial-type fan which operates at the relative total pressure of 671Pa and static pressure of 560Pa with the flow rate of $416.6m^3/min$ is developed with an optimization technique based on the gradient method. Prior to the optimization of fan blade, a three-dimensional axial-type fan blade is designed based on the free-vortex method along the radial direction. Twelve design variables are applied to the optimization of the rotor blade, and one design variable is selected for optimizing a stator which is located behind of the rotor and is used to support a fan driving motor. The total and static pressure are applied to the restriction condition with the operating flowrate on the design point, and the efficiency is chosen as the response variable to be maximized. Through these procedures, an initial axial-fan blade designed by the free vortex method is modified to increase the efficiency with the satisfaction of the operating condition. The optimized fan is tested to compare the aerodynamic performance with an imported same class fan. The test result shows that the optimized fan operates with the satisfaction of restriction conditions, but the imported fan cannot. From the experimental and numerical test, they show that this optimization method improves the fan efficiency and operating pressures of a fan designed by the classical fan design method.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.4
• /
• pp.105-117
• /
• 2004

The Pasadena Freeway follows the Arroyo Seco through foothills and scenic passes to link Downtown Los Angeles with Pasadena. The approximately 10 mile road was the first freeway built in the West during the 1930's and is today designated as a Historic Parkway. As it approaches Pasadena, it terminates at a traffic light intersection at Glenarm Street, and then becomes a commercial road the Arroyo Parkway. This one and a quarter mile long, north south road moves significant volumes of traffic both into and out of Pasadena. The Arroyo Parkway is thus a major 'gateway' and an important axis of orientation and movement, terminating in the City's core civic, commercial and retail district. Planting, lighting, signage, paving, furnishing and fixtures ought to all be properly designed and coordinated to create a distinctive 'gateway' experience arriving to Pasadena and driving along the Arroyo Parkway. Alternate design studies, developed in discussion with City officials and others involved in the redevelopment of the area, would need to be done to properly decide on the best direction. Issues of heritage and traditional streetscape will likely have to be reconciled with both the reality of the vehicular character of the road and more contemporary themes. Obviously with such large parcels of property available in the Arroyo Fair Oaks corridor, there is a huge potential for redevelopment and building. This potential would only be strengthened by the Light Rail Line and its stations, the improvements to the Arroyo Parkway, and the redevelopment of the Arts Center College of Design. Guides and controls to the development process, including programming and physical design studies, would need to be developed in order to ensure that the maximum potential for the corridor be realized. This concept proposal suggests that the whole strip might be developed as a Arts and Technology corridor, with special emphases on education, public culture, media and lifestyle. The full programming possibilities need to be further developed. Additionally, appropriate urban design guidelines to ensure high quality development also need to be incorporated into an overall development plan.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.582-585
• /
• 2018

As traffic volume increases and road networks become more complicated, identifying for accurate traffic flow and driving smooth traffic flow are a concern of many countries. There are various analytical techniques and studies which desire to study about effective traffic flow. However, the necessary activity is finding the traffic flow pattern through data visualization including location information. In this paper aim to study a real-world urban traffic trajectory and visualize a pattern of traffic flow with a simulation tool. Our experiment is installing the sensor module in 40 taxis and our dataset is generated along 24 hours and unscheduled routes. After pre-processing data, we improved an open source traffic visualize tools to suitable for our experiment. Then we simulate our vehicle trajectory data with a dots animation over a period of time, which allows clearly view a traffic flow simulation and a understand the direction of movement of the vehicle or route pattern. In addition we further propose some novel timelines to show spatial-temporal features to improve an urban environment due to the traffic flow.

• Journal of Convergence for Information Technology
• /
• v.10 no.8
• /
• pp.127-136
• /
• 2020

Chemical terrorism and accidents using chemicals are continuously occurring and attempted in and out of the country. In Korea, the National Institute of Chemical Safety affiliated with Ministry of Environment employs the CARIS(Ver. 2018) to assess the damage impact range for field-based response against chemical terrorism and accidents. However, the current version of CARIS can not consider the effects of closed space such as indoor and underground, so it is difficult to provide accurate evaluation results for damage impact range required for field response, on top of the limited information available. The limitations and directions for improvement were studied by comparing and reviewing the evaluation results of the damage impact range obtained by driving CARIS (Ver. 2018) and the domestic and foreign literature. Proposed improvements also included the direction of information provided to residents, including the need to build modeling for special points, such as underground, indoor, etc., and on-site response personnel. It is expected that through the continuous supplementation and correction of CARIS, chemical terrorism and accident response capability system will be advanced further.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.2
• /
• pp.104-109
• /
• 2020

In this paper, we proposed a miniaturized folded inverted F antenna with ISM-band (center frequency : 447 MHz) for mounting in intelligent parking sensor. First, to mount the antenna in the intelligent parking sensor module (72 mm × 70 mm) with limited size, a folded inverted F antenna was designed at low frequency 447 MHz (wavelength λ : 670 mm) of the ISM-band. As a result, it resonates in the ISM band and obtains suitable characteristic with a -10 dB bandwidth of 13 MHz (2.9%). In addition, the H-plane pattern by the vertical and horizontal elements represents the omni-directional patterns from which the null point is removed, and the E-plane has directivity in a specific direction. Finally, it is suitable as and antenna for vehicle management in parking lots.