• Electronics and Telecommunications Trends
• /
• v.37 no.4
• /
• pp.11-18
• /
• 2022

Sharing vehicle data among the companies within a car ecosystem can improve driving experience, increase driver comfort, contribute to social goals such as improving road safety and lowering fuel consumption. Furthermore, by participating in the ecosystem, companies can secure long-term and sustainable new revenue-generating opportunities. In this paper, we will examine the bottleneck and success factors of data sharing, as well as the technological solutions that urgently require development for car data sharing.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1D
• /
• pp.11-19
• /
• 2008

Currently, existing car following models among several basic systems of advanced vehicle systems are almost developed related to the physical relation between two vehicles except for the driver's behavior or environmental factors. But the consideration of driver's character and environmental factors on driving are very essential factors for actual application. Hence, we suggested calibrating the degree of driver's discomfort on driving that is the former study to develop a new car following model of advanced vehicle to use in actuality. The degree of driver's discomfortness (Measure-of-Alarmness; MOA)is measured related to the relationship between the following vehicle and the preceding vehicle, the environmental factors and driver's characters in ubiquitous traffic. We made up questions to drivers to obtain the general and the objective measurement of driver's MOA. And the fuzzy logic model for measurement of MOA was constructed based on the results of survey. We verified the suitability of fuzzy logic model through the computation of MOA with several scenarios. And we measured the quantitative degree of driver's discomfortness on car following related to several factors which affect drivers. In accordance with this study, development of car following model applying driver's MOA will promote the actual application of advanced vehicle more effectively than the existing models. Finally, we thought the measurement of driver's MOA will be applied significantly to evaluate safety and comfort of drivers on driving.

• Journal of Korean Society of Transportation
• /
• v.20 no.4
• /
• pp.19-26
• /
• 2002

The purpose of this paper is to study the fundamental characteristics of bicycle flows. Several experiments were conducted to obtain the characteristics of bicycle flows, speed variation along a curve radius, bicycle driver's travelling territory and saturation flow rate at signalized intersection. Bicycle facilities are categorized into uninterrupted and interrupted, the capacity of uninterrupted is approximately 5000bic/h, and that of the interrupted (at signalized intersection) is approximately 3000bic/h, when a curve radius is over 20m, bicycle speed is not increasing. Bicycle driver's travelling territory is used to occupancy area, it is the same concept as pedestrian's. Bicycle occupancy area is to be divided into circulation zone, comfort zone. and collision zone. Circulation zone is over 2.21$\times$4.1m and collision zone is less than 0.96$\times$2.47m. Comfort zone is defined as intermediate state between two zones.

• Journal of Auto-vehicle Safety Association
• /
• v.5 no.2
• /
• pp.24-31
• /
• 2013

This paper describes a coordinated control algorithm for rear-side collision avoidance. In order to assist driver actively and increase driver's safety, the proposed coordinated control algorithm is designed to combine lateral control using a steering torque overlay by Motor Driven Power Steering (MDPS) and differential braking by Vehicle Stability Control (VSC). The main objective of a combined control strategy is twofold. The one is to prevent the collision between the subject vehicle and approaching vehicle in the adjacent lanes. The other is to limit actuator's control inputs and vehicle dynamics to safe values for the assurance of the driver's comfort. In order to achieve these goals, the Lyapunov theory and LMI optimization methods has been employed. The proposed coordinated control algorithm for rear-side collision avoidance has been evaluated via simulation using CarSim and MATLAB/Simulink.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.3
• /
• pp.214-222
• /
• 2012

Driver's feeling is variously affected by lots of components such as engine, frame, wheels, and seats during the operation of automobiles. The main objective of this research is to identify the correlation between subjective evaluation and vibration metrics that was set by ISO to investigate development of the car vibration quality index using multiple linear regressions(MLR). A previous research related with automotive vibration quality used the method of calculating acceleration values of the point of a seat, a seat back, foot as RMS for objective evaluation. The automotive comfort is determined by RMS values. In comparison with the previous research, this study includes not only the vibration metrics, but also subjective values by jury evaluation. By indentifying the correlation between subjective evaluation and vibration metrics, the automotive vibration quality index is developed through MLR. Based on the results of this study, the proposed the automotive vibration quality index which developed through MLR will be helpful to obtain objective and reliable automotive comfort values.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.110-113
• /
• 2000

In general, speed control method of the elevator system has used motor pole change type or motor primary voltage control type. But it will change to vector control type in order to increase it's reliability, riding comfort and decrease material cost. It is the conception of vector control type in order to increase it's reliability, riding comfort and decrease material cost. It is the conception of vector control that primary current of the induction motor be controlled independently with magnetizing current(field current of DC motor) and torque current(armature current of DC motor). In this paper, by analyzing the effect of the time constant variation of rotor of the induction motor on the slip frequency type indirect vector control, a drive system for the motor will be constructed using a fuzzy slip frequency type indirect vector controller with fuzzy control method for estimating the vector time constant in the slip frequency type indirect vector control. The goal of this study is to enabling even more efficient speed control by constructing on elevator driver based on the newly developed drive system.

• Journal of Power System Engineering
• /
• v.14 no.3
• /
• pp.33-38
• /
• 2010

Technology of vehicle industry has been developing and it is required a better vehicle performance than before. Therefore, the consumers are asking not only an economic efficiency, functionality, polished design, ride comfort and silence but also a driving stability. The ride comfort, silence and driving stability are influenced by the size of vehicle and various facilities. But the principal factor is a room noise and vibration sensed by a driver and passenger. Thus, the NVH of vehicle has been raised and used as a principal factor for evaluation of vehicle performance. The primary objective of this study is an optimized design of powertrain mounting system. To optimized design was applied MSC.Nastran optimization modules. Results of dynamic analysis for powertrain mounting system was investigated. By theses results, design variables was applied 12 dynamic spring constant. And the weighting factor according to translational displacement and rotational displacement applied 3 cases. The objective function was applied to minimize displacement of powertrain. And the design variable constraint was imposed dynamic spring constant ratio. The constraint of design variable for objective function was imposed bounce displacement for powertrain.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.683-688
• /
• 2012

Driver's feeling is variously affected by lots of components such as engine, frame, wheels, and seats during the operation of automobiles. The main objective of this research is to identify the correlation between subjective evaluation and vibration metrics that was set by ISO to investigate development of the car vibration quality index using multiple linear regressions (MLR). A previous research related with automotive vibration quality used the method of calculating acceleration values of the point of a seat, a seat back, foot as RMS for objective evaluation. The automotive comfort is determined by RMS values. In comparison with the previous research, this study includes not only the vibration metrics, but also subjective values by jury evaluation. By indentifying the correlation between subjective evaluation and vibration metrics, the automotive vibration quality index is developed through MLR. Based on the results of this study, the proposed the automotive vibration quality index which developed through MLR will be helpful to obtain objective and reliable automotive comfort values.

• ETRI Journal
• /
• v.44 no.4
• /
• pp.641-653
• /
• 2022

In the process of autonomous vehicle motion planning and to create comfort for vehicle occupants, factors that must be considered are the vehicle's safety features and the road's slipperiness and smoothness. In this paper, we build a mathematical model based on the combination of a genetic algorithm and a neural network to offer lane-change solutions of autonomous vehicles, focusing on human vehicle control skills. Traditional moving planning methods often use vehicle kinematic and dynamic constraints when creating lane-change trajectories for autonomous vehicles. When comparing this generated trajectory with a man-generated moving trajectory, however, there is in fact a significant difference. Therefore, to draw the optimal factors from the actual driver's lane-change operations, the solution in this paper builds the training data set for the moving planning process with lane change operation by humans with optimal elements. The simulation results are performed in a MATLAB simulation environment to demonstrate that the proposed solution operates effectively with optimal points such as operator maneuvers and improved comfort for passengers as well as creating a smooth and slippery lane-change trajectory.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10C
• /
• pp.749-757
• /
• 2008

In this paper, we propose an authentication scheme for EVPT (Emergency Vehicle Priority Transit) service in Vehiclar Ad-hoc Networks (VANET) enable a variety of vehicle comfort services, traffic management applications, and infotainment services. These are the basis for a new generation of preventive and active safety functions. By intelligently controlling signalling at intersections, providing additional information to the driver and warning the driver in critical situations. we therefore focus on vehicle-to-infrastructure communication for the authentication between emergency vehicles and traffic lights system. This authentication process should identify the vehicle, and provide privacy protection.