• International Journal of Automotive Technology
• /
• 제7권4호
• /
• pp.449-457
• /
• 2006

The driver model during drift cornering was examined, and a technique to improve vehicle movement performance during drift cornering was investigated. Based on the results obtained, the driver was found to steer using feedback of the body slip angle and the body slip angle velocity during drift cornering. Moreover, improvement of the cornering force characteristic, at which exceeded the maximum cornering force calm as much as possible is important.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.446-448
• /
• 2008

A new plasma display panel sustaining driver using single side sustaining technique with the dual resonant method is proposed. Since this circuit enables to reduce switches in energy recovery circuit with keeping voltage stress like that of prior circuit, it can be low cost circuit comparing with a conventional driver. To integrate sustain function into one side with single power source in the driver, a charge pump method is adopted to make negative sustaining voltage and achieve dual resonant energy recovery on sustaining modes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.39-40
• /
• 2009

This paper presents a white-LED driver IC for a mobile application. It uses a high efficiency current mode boost converter method for a low voltage application. For a LED drive, it provides a PWM(Pulse Width Modulation) and analog dimming function. The device was designed and fabricated using 0.35um BCD process. The evaluated waveforms for an implemented IC show promising results.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.101-104
• /
• 2008

This paper is a report of designing for LED lights driver unit. The main purpose of driver designing is high electrical efficient performance and intelligent control LED driver. This LED driver can be used for intelligent light control. This product expects to improve the light control by dimming instead of interlace on/off light control that increases the social cost such as car accidents and etc.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.461-466
• /
• 2002

This paper show Device Driver for RTOS-FT Systems. In this paper, a definition of Device Driver is introduced which is used in RTOS-FT Systems. The structure of Device Driver is briefly divided into physical layer and logical layer. The specific characteristic of Physical Held and logical field which is discussed in this paper is suggested for the system which is satisfied with fault-tolerant theory.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1995년도 추계학술대회 학술발표 논문집
• /
• pp.159-164
• /
• 1995

Driving maneuver in car following are affected by not only the factors related to road structure and traffic condition, but also the factors related to driver's cognition to them. So the aim of this research this to model the relation of driver's cognition for car-following distance considering driver's fuzziness for imformation cognition, As a result, driver's cognition of car-following distance model with fuzzy number is proposed. The 'width', which characterizes the fuzzy number can introduce car-following informtion into the model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.140-142
• /
• 2001

In this paper, we designed a high precision Linear Motor Driver with 120 commutation method. It was composed of three parts which were divided into Power and Inverter Circuit, Analog Circuit with PWM Generation and Fault Protections, and Logic Circuit We selected LC-DSP by MEI for testifying a high accuracy of a designed driver. We proved the propriety as measured the accuracy with each velocity.

• 한국정보통신학회논문지
• /
• 제20권12호
• /
• pp.2317-2325
• /
• 2016

본 논문은 reference driver를 이용한 10비트 10MS/s 축차근사형(SAR: Successive Approximation Register) 아날로그-디지털 변환기(ADC: Analog-to-Digital Converter)를 제안한다. 제안하는 SAR ADC는 커패시터형 디지털-아날로그 변환기(CDAC: Capacitive Digital-to-Analog Converter), 비교기, SAR 로직, 그리고 공급 전압 노이즈에 대한 내성을 향상시키는 reference driver로 구성된다. ${\pm}0.9V$의 아날로그 입력전압을 가지는 SAR ADC를 위해 reference driver는 0.45V, 1.35V의 기준 전압을 생성한다. 설계된 SAR ADC는 $0.18{\mu}m$ CMOS 공정을 이용하여 제작되었으며 1.8V의 공급전압을 사용하였다. 제안된 SAR ADC는 reference driver를 이용하여 +/- 200mV의 공급 전압 변화에서도 ${\pm}0.9V$의 입력 범위를 유지한다. 10MS/s의 샘플링 주파수에서 5.32mW의 전력을 소모한다. 측정된 ENOB는 9.11 비트 이며, DNL과 INL은 각각 +0.60/-0.74 LSB와 +0.69/-0.65 LSB이다.

• 한국산학기술학회논문지
• /
• 제21권10호
• /
• pp.1-7
• /
• 2020

최근 LED 디스플레이 시스템이 활발히 보급됨에 따라서 시스템 구동을 위한 LED 드라이버의 효과적인 제어방법에 대한 연구가 진행 중이다. 그 중에 가장 대표적인 것이 LED Driver 채널의 균일한 밝기 제어이다. 본 논문 에서는 채널 휘도 편차 최소화를 위한 전류보상 및 시스템 보호 기능을 갖는 BLU용 LED driver IC를 제안하였다. 제안하는 LED Driver IC는 채널 간 ±3% 이내의 current accuracy와 150mA 채널 전류를 목표로 설계하였다. 설계 사양을 만족시키기 위해 채널 구동 PWM 신호를 이용한 chopping 동작을 수행하도록 하여 채널 앰프 옵셋을 상쇄할 수 있도록 하였다. 또한 pre-charge기능을 구현하여 빠른 동작 속도와 채널간 휘도 편차를 최소화할 수 있도록 하였다. LED에러(오픈, 쇼트), 스위치 TR 쇼트 감지 및 동작 온도 보호 회로를 설계하여 IC 및 BLU시스템을 보호할 수 있도록 하였다. 제안된 IC는 Cadence 및 Synopsys사의 Design Tool을 사용하여 설계 하였으며, Magnachip 0.35um CMOS 공정을 사용하여 제작되었다. 제작된 LED driver IC는 채널 간 ±1.5% 이내의 current accuracy와 150mA 채널 출력특성을 만족하였으며, 평가 보드를 통해 에러 검출 회로들이 정상 동작함을 확인하였다.

• 대한인간공학회지
• /
• 제31권5호
• /
• pp.657-670
• /
• 2012

Background: Today, numerous telematics technologies, i.e., technologies developed by integrating telecommunications with information processing, are applied in vehicles. One such developmental application of this technology to vehicles is to increase the safety or convenience of drivers by providing them with necessary information such as warnings and information on emergencies and traffic situations. However, under certain conditions, there is a high probability of traffic accidents if the driving workload is high. Nowadays, the navigation system is frequently used in the vehicles, this system provides various information including route to the driver. But, the existing navigation systems are not only considered a driver's reaction but also provide unilaterally to the information regardless of them. Such one-side information service type may miss important information to the driver. In addition, it sometimes interferes safety driving. Objective: To solve this problem, the intelligent navigation system needs to the providing way that it checks the driver's reactions after providing information. Namely, if the driver passes the information received from the navigation, then the intelligent system provides more loudly and more frequently. Method: Therefore, in this study we introduce the intelligent navigation system that it automatically controls modality type and its strength when the driver misses or overlooks the information for their safety and entertainment and we analyze the driver's cognitive responses about the modality type and its strength. Results: To evaluate the effectiveness of the proposed system, we analyzed the reaction time and driving workload for each type of the information, modality and its strength. Also we evaluated the users' subjective satisfaction and understanding based on a questionnaire.