• 수산해양기술연구
• /
• 제31권2호
• /
• pp.190-198
• /
• 1995

전원을 단락시킴이 없는 SCR이중 브리지 트리거 방식을 고안하여, 정역전이 가능한 SCR 서보증폭기로 구성하여 본 결과 다음과 같은 결론을 내릴 수 있었다. I. 출력전압의 부호를 변경시킬 때 현재의 전언부호가 반전될 때까지 도통 상태를 유지시키다가, 전원부호가 반전된 이후 적절한 SCR을 도통 시킴으로서 크리거 실패가 없게 되어, 전원을 단락시키지 않게 되고 SCR의 소손을 막을 수 있었다. II. -에서 약 30Hz 부근까지는 60Hz의 전원으로서 원하는 출력을 표현할 수 있었는데, 이는 대형 직류 전동기의 동특성을 충분히 확보할 수 있는 값이다. III. 유도성 부하의 경우라도 이미 도통된 SCR을 통하여 유동성부하L에 저장될 수 있는 에너지의 총량은 전원의 반주기 시간과 전원이 파고치값 한계내이므로, 다음 반주기동안 부호만 반전된 전원 전압과 동일한 반주기의 시간이 존재하므로, 에너지 보존의 법칙에 의해 반드시 다음 반주기 안에 현재도통된 SCR은 소호되게 되므로 트리거실패는 존재하지 않는다.

• 한국정보통신학회논문지
• /
• 제23권8호
• /
• pp.966-974
• /
• 2019

본 연구에서는 저전력 영역에서의 효율을 개선하기 위해 바이패스 구조를 갖춘 2.4GHz CMOS 전력 증폭기를 제안한다. 바이패스 구조를 설계하기 위해, 구동 증폭단의 공통 게이트 트랜지스터를 두 개로 분할하였다. 공통 게이트 트랜지스터 중 하나는 고출력 전력 모드를 위한 전력단을 구동하도록 설계된다. 다른 공통 게이트 트랜지스터는 저출력 전력 모드를 위해 전력단을 바이 패스하도록 설계하였다. 측정 된 최대 출력은 20.35 dBm이며 효율은 12.10 %이다. 11.52 dBm의 측정 된 출력에서 효율은 전력증폭단을 바이 패스함으로써 1.90 %에서 7.00 %로 향상됨을 확인하였다. 측정 결과를 바탕으로 제안 된 바이 패스 구조의 타당성을 성공적으로 검증 하였다.

• 한국소음진동공학회논문집
• /
• 제26권1호
• /
• pp.82-88
• /
• 2016

This paper proposes a new type of semi-active direct-drive valve(DDV) car suspension system using piezoelectric actuator associated with displacement amplifier. As a first step, controllable piezoelectric DDV damper is designed and governing equation of a quarter-vehicle suspension system consisting of sprung mass, spring, tire and the piezostack DDV damper is constructed. After deriving the equations of the motion, in order to control spool displacement and damping force the skyhook controller is designed and applied. The performance evaluation of the proposed semi-active suspension system is conducted with different displacement of spool. Then, the ride comfort analysis is undertaken in time domain with bump road profile.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.260-270
• /
• 1994

With the prevalent use of robot, the interests in moving speed of robot have been increasing for the purpose of upgrading performance of production. But the faster robot manipulator moves, the worse working accuracies are. And mechanical vibration is more and more serious with the increment of the moving speed of robot. So, the study on the cause and control method of robot vibration is one of the points of issue in robotics. This paper focuses on the vibration of 3 DOF parallel link drive mechanism robot. We assume that links of robot manipulator are `rigid' and joints are `flexible elements'. Governing equations of robot system including controller, servo amplifier, D.C servo motor, transmission with elasticity, and manipulator dynamics are derived. On the basis of modelling, we define `controller stiffness' by the proportional gain of controller and `stiffness of transmission'. Numerical and experimental research is performed to study vibration phenomena of robot induced from the variation of these two defined stiffnesses, and its results are shown.

• 제어로봇시스템학회논문지
• /
• 제9권1호
• /
• pp.10-21
• /
• 2003

During seek operation in disk drives, the recording head is moved toward desired track by seek servo controller and then is settled onto the center of the desired track by settling servo controller. If the head speed at the start of settling servo control is not slow, it may produce overshoot relative to the center of track and thus extend the settling time. The degradation in settling performance will be more severe as the track width becomes smaller for higher density of data storage. We design a new settling servo controller for minimizing settling time based on the pole-zero cancellation. In order to cancel slow poles in settling response, we apply discrete pulse signals to the system in addition to the state feedback control. For exact pole-zero cancellation, we consider the dynamics of power amplifier used for actuator current regulation and the effects of delay in control action. In addition, we present system parameter identification algerian for the robustness of our controller to system parameter variation. In order to demonstrate the practical use of our controller, we present experimental results obtained by using a commercially available disk drive.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권12호
• /
• pp.671-678
• /
• 1999

In this study, it has been aimed that the accuracy of position control be increased by microstep drive to the 2 phase 8 pole HB type prototype of linear pulse motor of which winding are applied sine wave current and the vibration and noise in the lower speed region be decreased. The fixed off-time method which controls the exciting current bandwidth, was applied to the microstep current controller. When the LPM was driven 1/8 microstep its accuracy of position was 0.109[mm] (=tooth pitch 3.5[mm] ). Also, the elimination method of harmonics in the static thrust force is proposed. It was confirmed that the position error range of the prototype LPM was $\pm$0.2[mm].

• 한국산학기술학회논문지
• /
• 제19권11호
• /
• pp.695-700
• /
• 2018

본 논문에서는 고유전율 인쇄회로기판 상의 좁은 면적 내에 패키지(Package) 되지 않은 마이크로파(Microwave) 부품을 고밀도로 집적하는 HMIC (Hybrid Microwave Integrated Circuit) 기술을 적용하여 모듈(Module)의 크기를 소형화, 경량화하고 동시에 근접한 소자 상호간의 전자기적 간섭을 최소화 하는 구조 설계 및 제작 기술을 적용하여 광대역 주파수 범위에서 균일한 전기적 성능을 갖는 광대역 전력증폭기를 개발한 내용을 다루었다. 제작한 광대역 전력 증폭기의 성능을 측정한 결과, 동작 주파수 범위에서 소신호 이득은 32 ~ 36 dB 범위 내에 이득평탄도 ${\pm}1.5dB$를 갖음을 확인하였다. 또한, 출력전력은 동작 주파수 범위에서 30 dBm 이상을 만족하였으며, 잡음 지수는 7 dB 이내로 측정되어 목표규격을 만족하는 특성을 나타내었다. OIP3(Output Third Order Intercept Point)는 39 dBm 이상을 만족함을 확인하였다. 제작한 광대역 전력 증폭기는 전자전 체계의 재밍(Jamming) 발생 장치의 고출력 증폭기를 전기적으로 구동하기 위하여 필요한 목표 성능을 모두 만족함으로써 실제 적용이 가능하며, 향후 마이크로파 대역의 유사 전력 증폭기를 설계하는데 도움이 될 것으로 기대한다.

• 한국소음진동공학회논문집
• /
• 제19권8호
• /
• pp.781-787
• /
• 2009

This research is concerned with the application of the active linear actuator to the active vibration control of structure. The active linear actuator will be mounted on the sub-frame so that it can cancel the excitation transferred from the engine. Accelerometer mounted on the sub-frame detects the vibration and its signal is fed into the DSP controller where the control algorithm is installed. The output of the DSP controller is connected to the driver which amplifies the DSP output. In general, the pulse width modulation power amplifier is used to drive the voice-coil type actuator. This study shows the dynamic characteristics of the active linear actuator and active vibration control experimental results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.74-77
• /
• 2002

In this paper we present a novel temperature compensated Hall effect power IC for accurate operation of wide temperature and high current drive of the motor coil. In order to compensate the temperature dependence of Hall sensitivity with negative temperature coefficient(TC), the differential amplifier has the gain consisted of epi-layer resistor with positive TC. The material of Hall device and epi-resistor is epi-layer with the same mobility. The variation of Hall sensitivity is -38% at 150$^{\circ}C$ and 88% at - 40$^{\circ}C$. But the operating point(B$\sub$op/) and release point(B$\sub$RP/) of the Hall power IC are within ${\pm}$25%. The experimental results show very stable and accurate performance over wide temperature range of -40$^{\circ}C$ to 125$^{\circ}C$.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.172-178
• /
• 1993

This paper deals with the modeling and experiment of a robot system for force/impact control performance. The basic model is composed of a direct drive motor, servo amplifier, link, force sensor and environments. Based on the developed model, the stability of the whole system was analyzed via root locus method. For the force control, integral force compensation with velocity feedback method shows the best performance of all the explicit force control strategies. In dealing with impact, PID position control and the explicit force control method were implemented. Instead of add more damping to the robot system by velocity feedback, we developed a new passive damping method and it was also applied to enhance the damping characteristic of the system.