• Geomechanics and Engineering
• /
• v.24 no.3
• /
• pp.281-293
• /
• 2021

Uncertainties in geomechanical input parameters which mainly related to inappropriate data acquisition and estimation due to lack of sufficient calibration information, have led wellbore instability not yet to be fully understood or addressed. This paper demonstrates a workflow of employing Quantitative Risk Assessment technique, considering these uncertainties in terms of rock properties, pore pressure and in-situ stresses to makes it possible to survey not just the likelihood of accomplishing a desired level of wellbore stability at a specific mud pressure, but also the influence of the uncertainty in each input parameter on the wellbore stability. This probabilistic methodology in conjunction with Monte Carlo numerical modeling techniques was applied to a case study of a well. The response surfaces analysis provides a measure of the effects of uncertainties in each input parameter on the predicted mud pressure from three widely used failure criteria, thereby provides a key measurement for data acquisition in the future wells to reduce the uncertainty. The results pointed out that the mud pressure is tremendously sensitive to UCS and SHmax which emphasize the significance of reliable determinations of these two parameters for safe drilling. On the other hand, the predicted safe mud window from Mogi-Coulomb is the widest while the Hoek-Brown is the narrowest and comparing the anticipated collapse failures from the failure criteria and breakouts observations from caliper data, indicates that Hoek-Brown overestimate the minimum mud weight to avoid breakouts while Mogi-Coulomb criterion give better forecast according to real observations.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.10a
• /
• pp.343-349
• /
• 1998

A modeling of machined geometry and cutting force was proposed for the case of round shape machining, and the effects of internally machined profile are analyzed and its realiability was verified by the experiments of roundness tester, especially in boring operation in lathe. Also, harmonic cutting force model was proposed with the parameter of specific cutting force, chip width and chip thickness, and in this study, we can see that bored workpiece profile was also mapped into cutting force signal with this model. In general, we can calculated the theoretical lobe profile with arbitrary multilobe. But in real experiments, the most frequently measured numbers are 3 and 5 lobe profile in experiments. With this results, we can predict that these results may be applied to round shape machining such as drilling, boring, ball screw and internal grinding operation with the same method.

• Nuclear Engineering and Technology
• /
• v.33 no.2
• /
• pp.156-165
• /
• 2001

A radiological safety assessment was performed for a hypothetical near-surface radioactive waste repository as a simple screening calculation to identify important nuclides and to provide insights on the data needs for a successful demonstration of compliance. Individual effective doses were calculated for a conservative ground water pathway scenario considering well drilling near the site boundary. Sensitivity of resulting ingestion dose to input parameter values was also analyzed using Monte Carlo sampling. Considering peak dose rate and assessment time scale, C-14 and T-129 were identified as important nuclides and U-235 and U-238 as potentially important nuclides. For C-14, the dose was most sensitive to Darcy velocity in aquifer The distribution coefficient showed high degree of sensitivity for I-129 release.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.120-128
• /
• 2002

In order to analyze shell structures more accurately and effectively, a hybrid 4-node quadrilateral shell element is formulated. The element includes the frilling degrees of freedom and the independent parameter terms of the stress resultants are appropriately selected to overcome some of the shortcomings of the standard 4-node quadrilateral elements. In order to show the accuracy and convergent characteristics of the proposed shell element, three numerical examples are analyzed and the results are compared with the existed. As a result of this study, following conclusions are obtained. (1)Analysis results by the proposed element are less sensitive to the element geometric distortion. (2)The proposed element does not produce any spurious zero-energy modes

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3
• /
• pp.165-173
• /
• 2009

The physical properties of a seafloor sediment have been used as a basic data for the ocean survey. Conventional methods such as a coring, a drilling, and a grabbing have been used to explore the physical properties but these methods have a number of shortcomings as it is time consuming, expensive and spatially limited. To overcome these limitations, seafloor sediment classification using acoustic signals has been studied actively. In this paper, we obtained the backscattered signal from the seafloor sediment using an echo sounder which is one kind of seafloor topography equipment. Nakagami probability density function of the backscattered signals from the seafloor sediment was computed and a Nakagami parameter was compared with the physical properties of the seafloor sediment. We have confirmed that Nakagami parameter, m is correlated with the physical properties of a seafloor sediment. This study will be utilized as a basic data of the seafloor sediment research.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.11 no.2
• /
• pp.23-40
• /
• 1974

Semisubmersible 해양석유시추선의 기본설계에 필요한 파랑중(波浪中)에서 운동(運動)을 계산(計算)하는 이론적방법(理論的方法)을 제시하고 "MOHOLE"과 "SEDCO 1350-F" 석유시추선들의 운동(運動)을 해석하였다. 이 규칙파에서 운동계산을 불규칙해양파(波)에 적용하는 응용해석을 보여주었다. 현재 이론적 방법으로는 6자유도(自由度)의 운동을 해양파의 어떤 방향에 대해서도 정확히 계산할 수 있으며 계산의 정확성은 수조(水槽)에서의 모형선의 운동측정치와 실선(實船)의 운동측정치와 비교하여 증명되었다. 또 현재의 방법은 종전에 개발된 방법보다 더 일반적(一般的)인 경우를 다룰 수 있으며 결과치도 더 정확하다. 극소운동특성을 갖는 해양석유시추선과 부체(浮體)해양구조물의 설계는 경비가 비싸고 시간이 많이 드는 모형실험보다는 유체역학적(流體力學的) Parameters를 신속 정확히 자주 변경 검토해야 하는 기본설계단계에서는 정확한 이론적인 전자계산기에 의한 계산방법이 절실히 필요하다. 예상(豫想)과 같은 부가질량(附加質量)과 감쇠력(減衰力)은 Resonance 운동주기에서만 운동에 영향을 준다. 해양구조물에 작용하는 파력(波力)은 Froude-Krilov force, 부가질량(附加質量) 및 감쇠력(減衰力)과 Restoring force로 구성했으며 규칙파(規則波)에서의 6자유도(自由度) 운동방정식은 본 논문에 제시된 실험측정치(値)와 실험으로 정확도가 증명된 이론치(値)의 부가질량과 감쇠력 계수(係數)를 써서 풀었다. 규칙파(規則波)에서의 계산된 운동을 Pierson Moskowitz 해양파(海洋波) 스펙트럼과 linear superposition principle에 의해 불규칙해양파(不規則海洋波)에서의 운동을 계산하는데 사용했다. 불규칙파(不規則波)에서의 운동은 운동스펙트럼과 통계적 운동치로 나타냈다. 현재의 계산방법은 실제 기본설게에 사용되어 왔으며, 다른 응용분야는 파랑중(波浪中)에서의 파면(波面)과 Deck간(間)의 Clearance, 계류선(係留線)의 동장력(動張力)계산의 기본 Data 및 기본설계의 Draft 등 Parameters를 통(通)한 Optimum Design 등(等)이다. 파(波)의 한 방향(方向)에 대(對)한 전자계산기(電子計算機)(IBM 370 또는 CDC 6400)에 의한 운동계산은 10초(秒)미만밖에 안걸린다. 또 현재의 계산방법은 해양석유시추선뿐 아니라 이와 비슷한 부체(浮體)해양구조물과 Pipe-laying선(船) 또 Supply Boat설계(設計)에도 쓰여지고 있다.

• Geomechanics and Engineering
• /
• v.15 no.2
• /
• pp.805-810
• /
• 2018

The abrasivity of rocks results in tool wear in rock excavation or drilling projects. It can affect significantly the cost and schedule of the projects performed in abrasive rock massess. For this reason, the understanding of the mechanism of rock abrasivity is very important for excavation projects. This study investigates the effect of strength on the LCPC abrasivity coefficient (LAC) for igneous rocks. The LCPT test, the uniaxial compressive strength (UCS) and the Brazilian tensile strength (BTS) tests were carried out on the igneous rock samples. The abrasive mineral content (AMC) was also determined for each rock type. First, the LAC was correlated to the AMC and a very good correlation was found between the two parameters. Then, the multiple regression analysis was carried out by including the AMC, UCS and BTS to the analysis in order to infer the effect of the strength on the LAC. It was seen that the correlation coefficients of multiple regression models were greater than that of the relation between the LAC and the AMC. It is concluded that the AMC is the dominant parameter determining the abrasivity of rock. On the other hand, the rock strength has also significant effect on rock abrasivity.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.887-890
• /
• 1997

Recently micromachining using DPSSL(Diode Pumped Solid State Laser) with 3rd harmonic wavelength is actively studied in laser machining area. Micromachining using DPSSL have outstanding advantages as UV source comparing with excimer laser in various aspect such a maintenance cost, maskless machining, high repetition rate and so on. In this study micro-drilling of PCB type substrate which consists of Cu-PI-Cu layer was performed using DPSS Nd:YAG laser(355nm, wavelength) in vector scanning method. Experimental and numerical method(Matlab simulation, FEM) are used to optimize process parameter and control machining depth. The man mechanism of this process is laser ablation. It is known that there is large gap between energy threshold of copper and that of PI. Matlab simulation considering energy threshold of material is performed to effect of duplication of pulse and FEM thermal analysis is used to predict the ablation depth of copper. This study could be widely used in various laser micromachining including via hole microdrilling of PCB, and micromachining of semiconductor components, medical parts and printer nozzle and so on.

• Tunnel and Underground Space
• /
• v.13 no.2
• /
• pp.138-152
• /
• 2003

Three-dimensional computer modeling using FLAC3D had been carried out fur evaluating the thermal-mechanical stability of a high-level radioactive waste repository excavated in several hundred deep location. For effective modeling, a FISH program was made and the geological conditions and rock properties achieved from the drilling sites in Kosung and Yusung areas were used. Sensitivity analysis fer the stresses and temperatures from the modeling designed utilizing fractional factorial design was carried out. From the sensitivity analysis, the important design parameters and their interactions could be determined. From this study, it was found that deposition hole spacing is the most important parameter on the thermal and mechanical stability. The second and third most important parameters were disposal tunnel and buffer thickness.

• Journal of Korean Society of Disaster and Security
• /
• v.10 no.1
• /
• pp.35-42
• /
• 2017

This is a comparative study on the characteristics of excavated soils, which is proceeded using soil strength parameter by literature, geotechnical investigation, standard penetration test by drilling, and downhole test by borehole at six sites in urban areas. The results of these site surveys are used as basic data for the evaluation and development of prediction of ground subsidence risk. Geotechnical properties are estimated with the result of standard penetration test-N value and literature. The dynamic geotechnical characteristics are also estimated with top-down seismic exploration at borehole.