• 제목/요약/키워드: Drift control

검색결과 364건 처리시간 0.025초

고온 동작 환경에서 드리프트 영역 길이 변화에 따른 100V급 LDMOSFET의 전기적 특성에 관한 연구 (A Study on the High Temperature Characteristics of 100V-Class LDMOSFET under various Drift Region Length)

  • 최철;김도형;구용서;안철
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
    • /
    • pp.278-281
    • /
    • 2000
  • In this study, the electrical characteristics of 100V -Class LDMOSFET for high temperature applications such as electronic control systems of automobiles and motor driver were investigated. Measurement data are taken over wide range of temperature(300K-500K) and various drift region length(6.6$\mu\textrm{m}$-12.6$\mu\textrm{m}$). In high temperature condition(>450K), drain current decreased over 50%, and specific on-resistance increased about twice in comparison with room temperature. Moreover the ratio R$\sub$on//BV, a figure of merit of the device, increased with increasing temperature.

  • PDF

중력하중에 설계된 RC골조 외부접합부의 내력특성 (Characteristics of RC Exterior Joint Designed to Gravity Load)

  • 이영욱;박형권;최덕범;채지용
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
    • /
    • pp.115-116
    • /
    • 2010
  • 본 연구에서는 1988년 이후에 중력하중에 대하여 설계되고 국내 철근 관행에 따라 배근된 철근콘크리트 골조 외부접합부의 거동 특성에 대하여 연구하기 위하여, 4개의 T형 부분골조 실험체를 만들고 변위비가 3.5%에 도달할 때까지 변위 하중을 가력하였다. 모든 시험체는 변비위 1%에 도달하기 전에 접합부에 파괴가 발생하여 FEMA의 제안치보다 작게 나타났으며, 종국강도가 휨 공칭강도에 의한 내력의 0.85배 이하로 나타났다.

  • PDF

AFD 기법의 출력전력 분석 (Output Power Analysis for Active Frequency Drift Method)

  • 이기옥;최주엽;최익;유권종
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2009년도 추계학술발표대회 논문집
    • /
    • pp.297-302
    • /
    • 2009
  • As the grid-connected photovoltaic power conditioning systems (PVPCS) are installed in many residential areas, these have raised potential problems of network protection on electrical power system. One of the numerous problems is an Islanding phenomenon. In this paper, active frequency drift (AFD) method, one of the anti-islanding analyzed by current magnitude compensation and calculation of RMS value of the output power.

  • PDF

수평 머시닝 센터의 준 정적 오차의 실시간 보정 (Real time compensation for quasistatic errors of a horizantal machining center)

  • 양승한
    • 한국정밀공학회지
    • /
    • 제14권11호
    • /
    • pp.154-162
    • /
    • 1997
  • A real time error compensation system was developed to improve the quasistatic volumetric accuracy of a machining center by using sensing, metrology, modeling, and computer control techniques. Including thermal errors, 32 error components are formulated in the time-space domain. Fifteen thermal sensors are used to characterize the temperature field of the machine. A compensation controller based on the IBM/PC has been linked with a CNC controller to compensate for machine errors in real time. The maximum linear displacement error in 4 body diagonals were reduced from 140 ${\mu}m$ to 34.5${\mu}m$ with this compensation system, and the spindle thermal drift in space was reduced from 147.3 ${\mu}m$ to 16.8 ${\mu}m$.

  • PDF

합성부재를 이용한 고층평면골조의 강성최적설계에 관한 연구 (A Study on Stiffness-based Optimal Design of Tall Plane Frameworks using Composite Member)

  • 김호수;이한주
    • 한국공간구조학회논문집
    • /
    • 제4권3호
    • /
    • pp.77-84
    • /
    • 2004
  • 본 연구에서는 횡하중을 받는 합성부재를 이용한 고층평면골조의 횡변위를 정량적으로 제어할 수 있는 효율적인 강성최적설계기법을 제시하고자 한다. 이를 위해 합성부재를 이용한 고층 구조물의 거동특성을 고려한 민감도 해석을 수행하며, 아울러 수학적계획법의 일반성을 유지하면서도, 큰 규모의 문제도 효율적으로 다룰 수 있는 근사화 개념을 도입하여 구속조건식을 설정한다. 특히 초기에 주어진 단면형상이 최적설계 과정동안 계속 유지된다는 가정을 이용하여 최적설계결과에서 구해진 단면특성에 따라 합성부재의 치수를 산출하는 방안을 강구한다. 제시된 정량적인 횡변위 제어 방안의 효용성을 검토하기 위해 두 가지의 50층 골조 예제가 고려된다.

  • PDF

천측 항법 시스템의 수직 방향 결정 (Determination of Local Vortical in Celestial Navigation Systems)

  • 석병석;유준
    • 제어로봇시스템학회논문지
    • /
    • 제13권1호
    • /
    • pp.72-78
    • /
    • 2007
  • Determination of the local vertical is not trivial for a moving vehicle and in general will require corrections for the Earth geophysical deflection. The vehicle's local vertical can be estimated by INS integration with initial alignment in SDINS(Strap Down INS) system. In general, the INS has drift error and it cause the performance degradation. In order to compensate the drift error, GPS/INS augmented system is widely used. And in the event that GPS is denied or unavailable, celestial navigation using star tracker can be a backup navigation system especially for the military purpose. In this celestial navigation system, the vehicle's position determination can be achieved using more than two star trackers, and the accuracy of position highly depends on accuracy of local vertical direction. Modern tilt sensors or accelerometers are sensitive to the direction of gravity to arc second(or better) precision. The local gravity provides the direction orthogonal to the geoid and, appropriately corrected, toward the center of the Earth. In this paper the relationship between direction of center of the Earth and actual gravity direction caused by geophysical deflection was analyzed by using precision orbit simulation program embedded the JGM-3 geoid model. And the result was verified and evaluated with mathematical gravity vector model derived from gravitational potential of the Earth. And also for application purpose, the performance variation of pure INS navigation system was analyzed by applying precise gravity model.

강성최적설계법을 이용한 아웃리거 시스템의 거동특성 및 효율성 평가 (Structural Behavior Characteristics and Efficiency Evaluation of Outrigger System using Stiffness-Based Optimal Design Technique)

  • 김호수;이한주
    • 한국공간구조학회논문집
    • /
    • 제5권3호
    • /
    • pp.123-130
    • /
    • 2005
  • 본 연구에서는 횡하중을 받는 아웃리거 시스템의 횡변위를 정량적으로 제어할 수 있는 효율적인 강성최적설계기법을 제시하고 이를 이용하여 아웃리거 시스템의 거동특성 및 효율성을 평가하고자 한다. 이를 위해 아웃리거를 이용한 고층 구조물의 거동특성을 고려한 민감도 해석을 수행하며 아울러 수학적계획법의 일반성을 유지하면서도, 큰 규모의 문제도 효율적으로 다룰 수 있는 근사화 개념을 도입하여 구속조건식을 설정한다. 특히 초기에 주어진 단면형상이 최적설계 과정동안 계속 유지된다는 가정을 이용하여 부재재설계 기법을 개발한다. 제시된 정량적인 횡변위 제어 방안의 효용성을 검토하기 위해 네 가지 형태의 50층 고층구조물 예제가 고려된다.

  • PDF

Precision orbit determination with SLR observations considering range bias estimation

  • Kim, Young-Rok;Park, Sang-Young;Park, Eun-Seo;Park, Jong-Uk;Jo, Jung-Hyun;Park, Jang-Hyun
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2010년도 한국우주과학회보 제19권1호
    • /
    • pp.27.5-28
    • /
    • 2010
  • The unexpected observation condition or insufficient measurement modeling can lead to uncertain measurement errors. The uncertain measurement error of orbit determination problem typically consists of noise, bias and drift. It must be removed by using a proper estimation process for better orbit accuracy. The estimation of noise and drift is not easy because of their random or unpredictable variation. On the other hand, bias is a constant difference between the mean of the measured values and the true value, so it can be simply removed. In this study, precision orbit determination with SLR observations considering range bias estimation is presented. The Yonsei Laser-ranging Precision Orbit Determination System (YLPODS) and SLR NP (Normal Point) observations of CHAMP satellite are used for this work. The SLR residual test is performed to estimate the range bias of each arc. The result shows that we can get better orbit accuracy through range bias estimation.

  • PDF

정전방제 시스템의 구성과 약액부착 효과에 관한 연구 (A Construction of the Electrostatic Pesticide Spray System and its Effectiveness in Droplets Deposition)

  • 김명규;민영봉;문성동
    • 한국생물환경조절학회:학술대회논문집
    • /
    • 한국생물환경조절학회 1998년도 임시총회 및 학술논문발표요지
    • /
    • pp.1-4
    • /
    • 1998
  • 상온연무기와 같은 소량살포기에 의해 살포된 농약액의 입자경은 10-20$\mu\textrm{m}$ 이하의 것이 대부분이다. 미소 액적은 단시간에 공기의 습구 온도와 평형하게 되어 혼합, 확산되는 특성을 가지고 있으며 증발과 Drift현상이 발생된다. 시설원예의 경우 폐쇄환경에 있으므로 연무직후 온실내 작업의 제한, 부착력포의 불균일, 증발과 Drift량의 과다 등이 큰 문제가 된다. (중략)

  • PDF

지구동주기위성의 위치보전해석과 궤도결정 (Station Keeping Analysis and Orbit Determination of Feosynchronous Satellite)

  • 박수홍;조겸래
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
    • /
    • pp.783-787
    • /
    • 1993
  • The dynamics for a two-body problem including perturbations due to nonspherical gravitation of the earth, gravitation of the sun and moon, radiation of the sun is studied. Orbit determination was performed by SVD filter. The simulation result shows that the characteristics of the satellite orbit have east-west and south-north drift. Therefore, the periodic magnitude of the control time and value in the view of the periodicity of error can be provided, and this result can be basic data to a station keeping problem with an orbit determination result.

  • PDF