• 디지털융복합연구
• /
• 제14권8호
• /
• pp.399-406
• /
• 2016

필름 채색(Drawn-on-film) 애니메이션 기법은 어떠한 영상 콘텐츠 분야 속에서 주도적으로 이용되거나 주목 받지 못한 기법으로서 본 연구를 통해 과거 실험적 기법을 새롭게 발굴 모색하여 애니메이션 장르의 미래적 방향과 미학적 측면을 강화하고자 하는 의미가 있다. 연구의 내용은 연구자가 교육적 프로그램 개발을 위해 필름 채색(Drawn-on-film) 애니메이션 기법을 실제 교육현장에서 응용하고 학습에 활용하며 얻은 결과물과 경험적인 정보, 그리고 이를 통해 새롭게 창출된 기법 등을 체계화하여 소개했다. 이 과정에서 대안적 디지털 제작 시스템을 제안하여 제작 과정들을 비교 실연하였고 궁극적으로 애니메이션 장르의 기법 발전에 도움이 될 수 있도록 연구하고 제시했다.

• 폴리머
• /
• 제25권2호
• /
• pp.208-217
• /
• 2001

테레프탈산 (terephthalic acid), 비스페놀에이 (bisphenol-A)와 에틸렌글리콜 (ethyleneglycol)로 제조된 PET/BPA 공중합체를 용융 압축시켜 필름을 만들어 얼음물에 급냉시켰다. 이 공중합체 필름을 모세관 레오메타로 고상 압출시켜 연신 필름을 만들었다. 이 연신된 필름의 수축율, 결정성, 형태학, 열적, 동역학적 및 기계적 특성을 조사하였다. 공중합체 필름의 융점은 순수 폴리에틸렌테레프탈레이트(PET)보다 낮게 나타났다. 또한 결정화도와 밀도는 연신비와 연신속도의 증가와 더불어 증가하였으나, 연신온도 증가와 더불어 감소하였다. 공중합체 필름의 인장강도와 인장탄성률은 연신비 증가와 더불어 증가하였고, 연신온도 증가에 따라 감소하였다. 연신된 공중합체 필름의 수축율은 연신비와 연신속도가 증가할수록 감소하였다.

• Fibers and Polymers
• /
• 제5권3호
• /
• pp.198-203
• /
• 2004

Composite films were prepared by casting the solution of polyacrylonitrile (PAN) and single wall nanotube (SWNT) in DMF subsequent to sonication. The SWNTs in the films are well dispersed as ropes with 20-30 nm thickness. Moreover, AFM surface image of the composite film displays an interwoven fibrous structure of nanotubes which may give rise to conductive passways and lead to high conductivity. The polarized Raman spectroscopy is an ideal characterization technique for identification and the orientation study of SWNT. The well-defined G-peak intensity at 1580 $cm^{-1}$shows a dependency on the draw ratio under cross-Nicol. The degree of nanotube orientation in the drawn film was measurable from the sine curve obtained by rotating the drawn film on the plane of cross-Nicol of polarized Raman microscope. The threshold loading of SWNT for electrical conductivity in PAN is found to be lower than 1 wt% in the composite film. The electrical conductivity of the SWNT/PAN composite film decreased with increasing of draw ratio due to the collapse of the interwoven fibrous network of the nanotubes with uniaxial orientation.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.260-262
• /
• 2002

An accurate measurement of dose distribution is indispensable to perform radiation therapy planning. A measurement technique using a radiographic film, which is called a film dosimetry, is widely used because it is easy to obtain a dose distribution with a good special resolution. In this study, we tried to develop an analyzing system for the film dosimetry using usual office automation equipments such as a personal computer and an image scanner. A film was sandwiched between two solid water phantom blocks (30 ${\times}$ 30 ${\times}$ 15cm). The film was exposed with Cobalt-60 ${\gamma}$-ray whose beam axis was parallel to the film surface. The density distribution on the exposed film was stored in a personal computer through an image scanner (8bits) and the film density was shown as the digital value with NIH-image software. Isodose curves were obtained from the relationship between the digital value and the absorbed dose calculated from percentage depth dose and absorbed dose at the reference point. The isodose curves were also obtained using an Isodose plotter, for reference. The measurements were carried out for 31cGy (exposure time: 120seconds) and 80cGy (exposure time: 300seconds) at the reference point. While the isodose curves obtained with our system were drawn up to 60% dose range for the case of 80cGy, the isodose curves could be drawn up to 80% dose range for the case of 31cGy. Furthermore, the isodose curves almost agreed with that obtained with the isodose plotter in low dose range. However, further improvement of our system is necessary in high dose range.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1984년도 하계학술회의논문집
• /
• pp.223-225
• /
• 1984

• 한국인쇄학회지
• /
• 제26권2호
• /
• pp.15-30
• /
• 2008

Studies were carried out the phenomenal observation on the effect of corona treated hotmelt laminating film in process of manufacture by 2 kinds of experiments. These are as follow: 1) In order to verify the treatment reducing value of dynes and dynes durability with the lapse of time, it was checked dynes of a pair of 4 bar discharge electrode with 9 one for 144 hr., and it show results that 9 bar discharge electrode has higher initial dynes as well as keep up 48 dynes durability long than 4 one. 2) Drawn an inference from 3 actions -Chemical-Physical-Mechanical, on laminating film in terms of SEM's observation that are the adhesive status in boundary of corona treated base film, extrusion coating hotmelt layer, and configuration of hotmelt surface after corona treated. In tandem system, EVA layers adhesion keep its stability without corona discharge treatment.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.364-373
• /
• 2001

This paper describes the variation of lubricant's temperature effects on elastohydrodynamic lubrication. The Newton-Raphson technique was used to solve the simultaneous system of Reynolds and elasticity equations. To show effects of lubricant's temperature, average temperature across the oil film was calculated using the energy equation. Pressure distribution, film shape, and temperature distribution were obtained for fully flooded conjunctions, and various dimensionless speed parameters while load and material parameters were held constant. Minimum film thickness were obtained for various material properties while load and velocity were held constant. It is drawn that the thermal effects have a strong influence on a minimum film thickness under high rolling velocity and slip ratio.

• 한국조명전기설비학회지:조명전기설비
• /
• 제1권2호
• /
• pp.74-81
• /
• 1987

고분자 절연재료에 전하주입시 발생하는 캐리어 트랩현상은 재료의 절연성을 저하시키는데 중요한 영향을 미치는 것으로 알려져 있다. 따라서 본 연구에서는 절연재료의 전기적 특성을 개선한다는 측면에서 캐리어의 거동을 파악하기 위해 내열성이 폴리프로필렌보다 우수한 이축 연신된 폴리프로필렌 필름(두께 $50\mu\textrm{m}$)을 선정하여 전계변화에 따른 열자격전류 스펙트라를 분석 검토하였다. 온도범위 303~413[K]와 전계범위 2~80[㎹/m]에서 열자격 전류의 변화를 살펴본 결과 전계 12[㎹/m]이하에서는 전하주입의 효과가 관찰되지 않았으나 전계가 점점 높아지면 트랩된 공간전하와 전극으로부터 주입된 공간전하가 형성되어 Hetero 및 Homo성 열자격전류 스펙트라가 나타나며 이는 결국 절연파괴를 야기시키는 것으로 예측되어진다. 또한 이축 연신된 시료가 미연신 재료보다 우수한 절연특성을 가지고 있음을 확인 할 수 있었다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.178-190
• /
• 2001

Tribological conditions and additive chemistry between frictional Interfaces were discussed in the present paper. The principles of the tribochemical surface modification were drawn on the basis of data of literatures and experiments. Results of gear tests proved experimentally that the principles would have potential applications in industry.

• Journal of Ceramic Processing Research
• /
• 제13권spc2호
• /
• pp.241-245
• /
• 2012

The barrier rib on plasma display panel (PDP) is a typical 3D-patterned thick film with thickness of 120 ㎛ and it is hard to measure its dielectric constant in this state of the product. Because the porosity of ceramic thick film influenced the mechanical and dielectric characteristics, it was expected that there was the relationship between two properties. Therefore, the correlation analysis between porosity, hardness and dielectric constant of the barrier rib was studied and the exponential curve between porosity and hardness, and the quadratic curve between porosity and dielectric constant were drawn. The dielectric constant was well related to hardness by K400kHz = 0.5672 + 5.695 ln(Hv). The hardness was measured at five points on two real panels which sintered by two types of profiles and then dielectric constants and deviation were estimated by the above equation.