• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 추계학술대회
• /
• pp.171-172
• /
• 1995

In this paper, an anatomical labeling system for assisting localization of region of interest on human brain imaging is represented. Model image for labeling anatomical name on the other image is Atlas. Object image to be labeled, such as CT, MR, and PET, is registered onto Atlas. And then, anatomical name for region of interest is appeared on a window by clicking mouse button on object image. The same part named anatomically on that region is labeled and drawn on object image.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.291-293
• /
• 2004

The aim of this study was to cross-validate a spatial probabilistic model of landslide likelihood ratios at Boun, Janghung and Yongin, in Korea, using a Geographic Information System (GIS). Landslide locations within the study areas were identified by interpreting aerial photographs, satellite images and field surveys. Maps of the topography, soil type, forest cover, lineaments and land cover were constructed from the spatial data sets. The 14 factors that influence landslide occurrence were extracted from the database and the likelihood ratio of each factor was computed. 'Landslide susceptibility maps were drawn for these three areas using likelihood ratios derived not only from the data for that area but also using the likelihood ratios calculated from each of the other two areas (nine maps in all) as a cross-check of the validity of the method For validation and cross-validation, the results of the analyses were compared, in each study area, with actual landslide locations. The validation and cross-validation of the results showed satisfactory agreement between the susceptibility map and the existing landslide locations.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.840-843
• /
• 2006

The aim of this study was to detect landslide using satellite image and apply the landslide to probabilistic landslide-susceptibility mapping at Gangneung area, Korea using a Geographic Information System (GIS). Landslide locations were identified by change detection technique of KOMSAT-1 (Korea Multipurpose Satellite) EOC (Electro Optical Camera) images and checked in field. For landslide-susceptibility mapping, maps of the topography, geology, soil, forest, lineaments, and land cover were constructed from the spatial data sets. Then, the sixteen factors that influence landslide occurrence were extracted from the database. Using the factors and detected landslide, the relationships were calculated using frequency ratio, one of the probabilistic model. Then, landslide-susceptibility map was drawn using the frequency ration and finally, the map was verified by comparing with existing landslide locations. As the verification result, the prediction accuracy showed 86.76%. The landslide-susceptibility map can be used to reduce hazards associated with landslides and to land cover planning.

• 산업경영시스템학회지
• /
• 제32권3호
• /
• pp.178-187
• /
• 2009

Six Sigma emphasizes KPI and establishes the present level as well as the goal level through statistical calculation and tries to achieve management innovation through process improvement. But in the area of new product development or service, sufficient data for statistical measurement may not be secured. On the other side, looking for contradictions through problem analysis, TRIZ is a methodology that stresses the process of solving these problems. TRIZ also has its own problems: it is hard to define its initial task, to objectify the measurement of effect, and to optimize the drawn out idea. The purpose of this report is to give a comprehensive understanding about each methodology (Sigma Six and TRIZ) through its analysis, to confirm the need of linking both methodologies, and to suggest a model for this linking process. Also, they will be verified through examples, and the synergy effect will be discussed.

• 대한조선학회논문집
• /
• 제41권6호
• /
• pp.134-139
• /
• 2004

It is known that over 60% of engine power is dissipated into circumstance, cooling water and cooling oil without any conversion into useful work. Following the first law of thermodynamics, it is possible that heat loss to cooling water can be converted into mechanical work through crankshaft. But in case that the engine is operating without any cooling effect, the serious problem unsolved so far is the engine durability. In this study, LHR(Low Heat Rejection) engine was introduced as one of the promising engine and several useful qualitative and quantitative data were drawn.

• 한국약용작물학회지
• /
• 제11권5호
• /
• pp.321-328
• /
• 2003

Various presowing seed treatments have been used to enhance the rates of germination and afterward seedling emergence. Seeds treated by them occasionally have not shown the same rate in indoor and field. The presowing treatments considering germination mechanism and factors affecting germination should be totally included in indoor experiments so that the results drawn could be reproduced in the field. Seed drying after the treatments and field conditions after sowing especially able to show Phytochromemediated responses related to light treatment must be determined prior to force the treatments to seeds. After set up these prerequisites to promote the rates of germination and emergence, many seed treatments proposed so far must be fixed how to be done; alone, sequential and simultaneous.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.840-843
• /
• 1996

This paper presents an adaptive cutting force controller for milling process, which can be attached to most commercial CNC machining centers in a practical way. The cutting forces of X,Y and Z axes measured indirectly from the use of currents drawn by AC feed-drive servo motors. A typical model for the feed-drive control system of a horizontal machining center is developed to analyze cutting force measurement from the drive motor. The pulsating milling forces can be measured indirectly within the bandwidth of the current feedback control loop of the feed-drive system. It is shown that indirectly measured cutting force signals can be used in the adaptive controller for cutting force regulation. The robust controller structure is adopted in the whole adaptive control scheme. The conditions under which the whole scheme is globally convergent and stable are presented. The suggested control scheme has been implemented into a commercial machining center, and a series of cutting experiments on end milling and face milling processes are performed. The adaptive controller reveals reliable cutting force regulating capability under various cutting conditions.

• 전자공학회논문지A
• /
• 제31A권10호
• /
• pp.94-100
• /
• 1994

By using the RAPHAEL 3D inductance calculation program RI3, the PGA package inductance values of INTEL i486 microprocessor have been extracted. The lead frame layouts are drawn using the mentor Boardstation and the output files are converted into the RI3 program input format of RAPHAEL. The power and ground planes of the PGA package are modeled y grid-line structures of single bars. The capacitance valuse of signal lines have been clalculated by using the RAPHAEL 2D/3D capacitance extraction program. The extraced L, C, R values have been converted into the SPICE netlist formats with lumped circuit model for future use in the signal ingegrity analysis.

• 한국주거학회논문집
• /
• 제17권3호
• /
• pp.89-98
• /
• 2006

The purpose of this study was to survey curriculum of the department of housing and to develop housing welfare educational program in order to offer the information helpful to the professional of housing education and housing policy makers. Documentary research and content analysis methods were used in this study. Data drawn from internet homepage of each universities and public institutions. The major results of this study are as follows. 1) There were 30 universities which has related to the department of housing and the name of major was very various. The half of their curriculum were housing and interior design. 2) The housing welfare educational program should be step by step. The first is basic step to team basic theory of housing and to establish concept of housing welfare. The second is application and practice step of housing design and housing policy and housing economics. The third is specific application step to consider that who were taker from the housing welfare policy and to take practical training in field.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.513-518
• /
• 1999

The objective of this experiment is to observe the elastic and inelastic behaviors of high-rise reinforced concrete frame with infilled masonry. To do this a building frame designed according to Korean seismic code and detailed in the Korean conventional manner was selected. An 1:12 scale plane masonry-infilled frame model was manufactured according to similitude law. Push-over test were performed under the roof displacement control. To simulate the earthquake effect, the lateral force distribution was maintained to be an inversed triangular by using whiffle tree. From the tests, story displacements, lateral story forces, local plastic rotations and the relations between inter-story drift versus story shear are obtained. Based on the test results, conclusions on the characteristics of the elastic and inelastic behaviors of a high-rise reinforced concrete frame with infilled masonry are drawn.