• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.840-843
• /
• 2006

The aim of this study was to detect landslide using satellite image and apply the landslide to probabilistic landslide-susceptibility mapping at Gangneung area, Korea using a Geographic Information System (GIS). Landslide locations were identified by change detection technique of KOMSAT-1 (Korea Multipurpose Satellite) EOC (Electro Optical Camera) images and checked in field. For landslide-susceptibility mapping, maps of the topography, geology, soil, forest, lineaments, and land cover were constructed from the spatial data sets. Then, the sixteen factors that influence landslide occurrence were extracted from the database. Using the factors and detected landslide, the relationships were calculated using frequency ratio, one of the probabilistic model. Then, landslide-susceptibility map was drawn using the frequency ration and finally, the map was verified by comparing with existing landslide locations. As the verification result, the prediction accuracy showed 86.76%. The landslide-susceptibility map can be used to reduce hazards associated with landslides and to land cover planning.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.3
• /
• pp.178-187
• /
• 2009

Six Sigma emphasizes KPI and establishes the present level as well as the goal level through statistical calculation and tries to achieve management innovation through process improvement. But in the area of new product development or service, sufficient data for statistical measurement may not be secured. On the other side, looking for contradictions through problem analysis, TRIZ is a methodology that stresses the process of solving these problems. TRIZ also has its own problems: it is hard to define its initial task, to objectify the measurement of effect, and to optimize the drawn out idea. The purpose of this report is to give a comprehensive understanding about each methodology (Sigma Six and TRIZ) through its analysis, to confirm the need of linking both methodologies, and to suggest a model for this linking process. Also, they will be verified through examples, and the synergy effect will be discussed.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.6
• /
• pp.134-139
• /
• 2004

It is known that over 60% of engine power is dissipated into circumstance, cooling water and cooling oil without any conversion into useful work. Following the first law of thermodynamics, it is possible that heat loss to cooling water can be converted into mechanical work through crankshaft. But in case that the engine is operating without any cooling effect, the serious problem unsolved so far is the engine durability. In this study, LHR(Low Heat Rejection) engine was introduced as one of the promising engine and several useful qualitative and quantitative data were drawn.

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.5
• /
• pp.321-328
• /
• 2003

Various presowing seed treatments have been used to enhance the rates of germination and afterward seedling emergence. Seeds treated by them occasionally have not shown the same rate in indoor and field. The presowing treatments considering germination mechanism and factors affecting germination should be totally included in indoor experiments so that the results drawn could be reproduced in the field. Seed drying after the treatments and field conditions after sowing especially able to show Phytochromemediated responses related to light treatment must be determined prior to force the treatments to seeds. After set up these prerequisites to promote the rates of germination and emergence, many seed treatments proposed so far must be fixed how to be done; alone, sequential and simultaneous.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.840-843
• /
• 1996

This paper presents an adaptive cutting force controller for milling process, which can be attached to most commercial CNC machining centers in a practical way. The cutting forces of X,Y and Z axes measured indirectly from the use of currents drawn by AC feed-drive servo motors. A typical model for the feed-drive control system of a horizontal machining center is developed to analyze cutting force measurement from the drive motor. The pulsating milling forces can be measured indirectly within the bandwidth of the current feedback control loop of the feed-drive system. It is shown that indirectly measured cutting force signals can be used in the adaptive controller for cutting force regulation. The robust controller structure is adopted in the whole adaptive control scheme. The conditions under which the whole scheme is globally convergent and stable are presented. The suggested control scheme has been implemented into a commercial machining center, and a series of cutting experiments on end milling and face milling processes are performed. The adaptive controller reveals reliable cutting force regulating capability under various cutting conditions.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.10
• /
• pp.94-100
• /
• 1994

By using the RAPHAEL 3D inductance calculation program RI3, the PGA package inductance values of INTEL i486 microprocessor have been extracted. The lead frame layouts are drawn using the mentor Boardstation and the output files are converted into the RI3 program input format of RAPHAEL. The power and ground planes of the PGA package are modeled y grid-line structures of single bars. The capacitance valuse of signal lines have been clalculated by using the RAPHAEL 2D/3D capacitance extraction program. The extraced L, C, R values have been converted into the SPICE netlist formats with lumped circuit model for future use in the signal ingegrity analysis.

• Journal of the Korean housing association
• /
• v.17 no.3
• /
• pp.89-98
• /
• 2006

The purpose of this study was to survey curriculum of the department of housing and to develop housing welfare educational program in order to offer the information helpful to the professional of housing education and housing policy makers. Documentary research and content analysis methods were used in this study. Data drawn from internet homepage of each universities and public institutions. The major results of this study are as follows. 1) There were 30 universities which has related to the department of housing and the name of major was very various. The half of their curriculum were housing and interior design. 2) The housing welfare educational program should be step by step. The first is basic step to team basic theory of housing and to establish concept of housing welfare. The second is application and practice step of housing design and housing policy and housing economics. The third is specific application step to consider that who were taker from the housing welfare policy and to take practical training in field.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.513-518
• /
• 1999

The objective of this experiment is to observe the elastic and inelastic behaviors of high-rise reinforced concrete frame with infilled masonry. To do this a building frame designed according to Korean seismic code and detailed in the Korean conventional manner was selected. An 1:12 scale plane masonry-infilled frame model was manufactured according to similitude law. Push-over test were performed under the roof displacement control. To simulate the earthquake effect, the lateral force distribution was maintained to be an inversed triangular by using whiffle tree. From the tests, story displacements, lateral story forces, local plastic rotations and the relations between inter-story drift versus story shear are obtained. Based on the test results, conclusions on the characteristics of the elastic and inelastic behaviors of a high-rise reinforced concrete frame with infilled masonry are drawn.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.140-143
• /
• 2003

Recently, many high-rise reinforced concrete (RC) bearing wall structures of multiple occupancy have been constructed, which have the irregularities of weak (or soft) story and torsion at the lower stories simultaneously. The study compared the eccentricity of such a building predicted by design codes, EC 8, IBC 2000 and UBC 97, and by the test results through a series of shaking table tests of 1:12 model. Based on the comparison of the predicted eccentricity and the test result, the conclusions are drawn as follow: Accidental torsion due to the uncertainty on the properties of structure can be reasonably predicted by using the dynamic analysis with the center of mass being shifted by 5 percent of the dimension of the building perpendicular to the direction of the excitations than by using equivalent lateral force procedure

• Journal of Korean Public Health Nursing
• /
• v.31 no.1
• /
• pp.121-134
• /
• 2017

Purpose: The goal of this study was to define and clarify the concept of "self management" of children with chronic diseases. Methods: For analyzing the concept of self management, this study used the hybrid model. This study involved in-depth interviewing nine children with chronic disease. Results: The concept of self management of children with chronic disease can be categorized with three dimensions: internal, environmental, and behavioral aspects. Besides, five attributes and thirteen indicators were analyzed. The concept of self management of children with chronic disease can be expressed as a kind of process; a) re-established yourself (internal dimension), b) assistance by the surrounded (environmental dimension), and c) positive health management behavior with self control of daily life (behavioral dimension). Conclusion: The self management is important for children with chronic disease to control their disease for long time. The attributes and indicators drawn by this study could be used for tool development and useful resources of self management competence in children with chronic disease.