This study examined the effects of the abdominal drawing-in (ADI) maneuver using a pressure biofeedback on muscle recruitment pattern of erector spinae and hip extensors and anterior pelvic tilt during hip extension in the prone position. Fourteen able-bodied volunteers, who had no medical history of lower extremity or lumbar spine disease, were recruited for this study. The muscle onset time of erector spinae, gluteus maximus, and medial hamstring and angle of anterior pelvic tilt during hip extension in prone position were measured in two conditions: ADI maneuver condition and non-ADI maneuver condition. Muscle onset time was measured using a surface electromyography (EMG). Kinematic data for angle of anterior pelvic tilt were measured using a motion analysis system. The muscle onset time and angle of anterior pelvic tilt were compared using a paired t-test. The study showed that in ADI maneuver during hip extension in prone position, the muscle onset time for the erector spinae was delayed significantly by a mean of 43.20 ms (SD 43.12), and the onset time for the gluteus maximus preceded significantly by a mean of -4.83 ms (SD 14.10) compared to non-ADI maneuver condition (p<.05). The angle of anterior pelvic tilt was significantly lower in the ADI maneuver condition by a mean of 7.03 degrees (SD 2.59) compared to non-ADI maneuver condition (15.01 degrees) (p<.05). The findings of this study indicated that prone hip extension with the ADI maneuver was an effective method to recruit the gluteus maximus earlier than erector spinae and to decrease anterior pelvic tilting.
KIM, Namgu;KIM, Hyung-Seok;LEE, Yoo-Won;RYU, Kyung-Jin
Journal of the Korean Society of Fisheries and Ocean Technology
/
v.58
no.1
/
pp.10-18
/
2022
Fishery sea anchor is widely used for many fishing vessels. However, standardization of the dimension and terminology of the fishery sea anchor has not been achieved, reducing the reliability of the performance and safety of the fishery sea anchor. Therefore, this study researches the reality of usage of fishery sea anchor and then attempts to suggest the development direction of the standard draft as basic data. As a result of the survey on the reality of usage show that various terms were used for each part of the fishery sea anchor (including the incorrect form of non-standard words derived from Japanese) and that the production of this product in the fishery sea anchor market was concentrated on one specific manufacturer. In addition, the main specifications of the fishery sea anchor are set and manufactured based on conventional experience without standards. In the field, there was no standardized drawing for fishery sea anchor and users had low awareness of the main specifications of fishery sea anchor. Therefore, this study suggested the following regarding the fishery sea anchor: standard terms for each part including Korean and English names and standard drawing of sea anchor. It is hoped that this study will contribute to research for the standardization of fishery sea anchor, which will increase in reliability and lead to increased interest in standardization in the fishery field.
Journal of The Korean Association For Science Education
/
v.27
no.3
/
pp.190-200
/
2007
In this study, we analyzed the uses of external representations in material units of 7th grade science textbooks developed under the 7th National Curriculum on the basis of theories and research results on learning with multiple representations. The results revealed that the frequencies of microscopic external representations were higher than those of macroscopic and symbolic external representations. The external representations with drawing and/or writing were presented more frequently than those without drawing and/or writing. Furthermore, the external representations were rarely presented on the basis of the principles (e.g., personalization principle) and/or theories (e.g., dual coding theory, cognitive load theory, and social constructivism theory) for effective uses of the external representations in learning with multiple representations. Educational implications are discussed.
Journal of the Korean Data and Information Science Society
/
v.26
no.2
/
pp.399-408
/
2015
This paper presented airquality data through data visualization in several ways and described its characteristics related to statistical methods for analysis. Software R was used for visualization tools. The airquality data was measured in New York city from May to September of year 1973. First, simple, exploratory data analysis was done in terms of both data visualization and analysis to find out univariate characteristics. Then through data transformation and multiple regression analysis, model for describing the airquality level was found. Also, after some data categorization, overall feature of the data was explored using box plot and three-dimensional perspective drawing and scatter plot.
The typical Kinetic Family Drawing (KFD) Web database system, a form of prototype system, has been developed, relying on the suggestions from family art therapists, with an aim to handle large amounts of assessment data and to facilitate effective implement of assessment activities. However, unfortunately such a system has an intrinsic problem that it fails to collect clients' behaviors, attitudes, facial expressions, voices, and other critical information observed while they are drawing. Accordingly we propose the ontology based video event analysis and video retrieval system in this paper, in order to enhance the function of a KFD Web database system by using a web camera and drawing tool. More specifically, a newly proposed system is designed to deliver two kinds of services: the client video retrieval service and the sketch video retrieval service, accompanied by a summary report of occurred events and dynamic behaviors relative to each family member object, respectively. The proposed system can support the reinforced KFD assessments by providing quantitative and subjective information on clients' working attitudes and behaviors, and KFD preparation processes.
Journal of The Korean Association For Science Education
/
v.38
no.5
/
pp.753-763
/
2018
The image of scientists that learners have has an important impact on science learning and on science-related career choices. The image of the scientist was mainly analyzed using the drawing analysis method. Drawing analysis has limitations on drawing, mainly analyzing the external image of scientist. Science teachers' images of scientists and their perception of science-related careers are important factors in students' science learning and science-related career choices. However, research on science teachers is lacking. Therefore, the purpose of this study is to investigate the usefulness of measurement tools by developing and applying a scientist image measurement tool through the semantic analysis method, and to discuss the educational implications of the research by investigating the image of scientists and science-related professions of secondary pre-service science teachers. The subjects of the study were 79 male and 55 female for a total of 134 students in the 2nd and 3rd grades majoring in science education at a teachers college. The results of the research show that the image measurement tool consisted of four components: 'ability,' 'evaluation,' 'activity,' and 'emotion,' in 24 items. As a result of applying the developed measurement tool to the secondary pre-service science teachers, the image of the 'evaluation,' 'ability,' and 'activity' elements of the scientist were high, but 'emotion' was low. There was no statistically significant difference according to gender. It is found that science-related career perceive them as 'hard,' 'professional,' 'smart,' and 'complex.' In particular, male students perceive themselves as 'hard and difficult' while female students perceive it as 'challenging and complicated'. Finally, we discussed the usefulness of using the image measurement tool of the scientists, the image of the scientists of the secondary pre-service science teachers, and the educational implications on science-related career.
Proceedings of the Korean Society for Technology of Plasticity Conference
/
2007.05a
/
pp.266-267
/
2007
Sandwich sheet with inner structure is expected to find many applications because of high stiffness to mass ratio. In order to simulate forming of sandwich sheet with pyramid core, an effective simulation method is required. Compared to the expensive model using solid elements, cost effective model using simplified elements such as shells and beams is developed. By comparing two models in terms of the cost and accuracy for unit cell deformation, a developed model shows some advantages over the model using solid elements. Evolution of two kind of forming limits, face buckling and core buckling are successfully expressed by developed model. Developed model is also applied in the simulation of square cup drawing and L-type bending. The corresponding experiments are carried out. Deformation shape and wrinkling behavior are compared and discussed. It is found that simulation results using a developed model are in good agreement with experiments.
Park, U-Yeol;Kim, Baek-Jung;Jung, Hyun-Ok;Yun, Seok-Heon;Cho, Hun-Hee;Kang, Kyung-In
Journal of the Korea Institute of Building Construction
/
v.8
no.1
/
pp.83-90
/
2008
The reinforcing steel process is composed of the development of placing drawing, cutting and bending, and the placement and fabrication of the reinforcement, and is participated in by reinforcement detailer, the fabricator and placer. Because the reinforcing steel process-from estimating and rebar detailing, to production, material tracking, billing, and general accounting-is conducted by many participant, reinforcement details based on building code and reinforcing bar detailing standards are essential. The process, however, holds some problems. Building code has been revised recently, and the utilization of placing drawings was proved to be low, and the reinforcement estimating in early stage of the process is below what is required for placement. Therefore, in this study, a survey was conducted to the reinforcement detailer, the fabricator and placer of domestic construction industry. According to the analysis of the survey, the reinforcement details on site was not standardized. The improvement in reinforcing steel detailing standards was sought by analyzing the results of the survey including reinforcement constructability.
Journal of the Korean Society of Clothing and Textiles
/
v.25
no.4
/
pp.783-794
/
2001
This research focuses its study on the expressions of the visual images of the fashion illustration as a part of visual art and utilizes it to formulate the theoretical basis. Main findings of our research are as follows: The structure of communications in the fashion illustration is based on the four elements. They are the expression of the texture, drawings, composition, and the human body and dress. The characteristics in expression of texture level in fashion illustration can be the expression of creative texture in pattern or crease, and also can be expressed as various collage and photomontage by computer graphics. Secondly, the analysis on the characteristics of the drawings show that the drawing skills are imagination and sequential drawings. Thirdly, the characteristics of composition method are mainly shown as the application of plane composition which was previously used in avant-garde arts. Fourthly, most of the human body in the fashion illustrations are shown as the results of simplification, exaggeration and deformation in human body and also expressed or analyzed by the method of the body modification. Based on the above findings of this research we conclude that the way of expression in the fashion illustration is very similar in its composition as in visual art. However, they also show differences between the two in expression method or the method for the image development in specific expressions.
International Journal of Precision Engineering and Manufacturing
/
v.2
no.2
/
pp.38-47
/
2001
This paper decribes the development of computer-aided design of a very precise progressice die for lead frame of semiconductor chip. The approach to the system is based on knowledgr-based rules. Knowledge of fie이 experts. This system has been written in AutoLISP using AutoCAD ona personal computer and the I-DEAS drafting programming Language on the I-DEAS mater series drafting with on HP9000/715(64) workstation. Data exchange between AutoCAD and I-DEAS master series drafting is accomplished using DXF(drawing exchange format) and IGES(initial graphics exchange specification) files. This system is composed of six main modules, which are input and shape treatment, production feasibility check, strip layout, data conversion, die layout, and post processing modules. Based on Knowledge-based rules, the system considers several factors, such as V-notches, dimple, pad chamfer, spank, cavity punch, camber, coined area, cross bow, material and thickness of product, complexities of blank geometry and punch profiles, specifications of available presses, and the availability of standard parts. As forming processes and the die design system using 2D geometry recognition are integrated with the technology of process planning, die design, and CAE analysis, the standardization of die part for lead frames requiting a high precision process is possible. The die layout drawing generated by the die layout module s displayed in graphic form. The developed system makes it possible to design and manufacture lead frame of a semiconductor more efficiently.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.