Journal of the Korean Society of Fisheries and Ocean Technology (수산해양기술연구)

The Korean Society of Fisheries and Ocean Technology (한국수산해양기술학회)
권호 표지
DOI QR코드

DOI QR Code

A study on standardization through the analysis of the survey on the use of fishery sea anchor

어업용 씨앵커의 사용실태 분석을 통한 표준화 연구

  • KIM, Namgu (Department of Fishery Production, Graduate School of Global Fisheries, Pukyong National University) ;
  • KIM, Hyung-Seok (Division of Marine Production System Management, Pukyong National University) ;
  • LEE, Yoo-Won (Training Ship, Pukyong National University) ;
  • RYU, Kyung-Jin (Training Ship, Pukyong National University)
  • 김남구 (부경대학교 어업생산학과) ;
  • 김형석 (부경대학교 해양생산시스템관리학부) ;
  • 이유원 (부경대학교 실습선) ;
  • 류경진 (부경대학교 실습선)
  • Received : 2022.02.03
  • Accepted : 2022.02.25
  • Published : 2022.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

Fishery sea anchor is widely used for many fishing vessels. However, standardization of the dimension and terminology of the fishery sea anchor has not been achieved, reducing the reliability of the performance and safety of the fishery sea anchor. Therefore, this study researches the reality of usage of fishery sea anchor and then attempts to suggest the development direction of the standard draft as basic data. As a result of the survey on the reality of usage show that various terms were used for each part of the fishery sea anchor (including the incorrect form of non-standard words derived from Japanese) and that the production of this product in the fishery sea anchor market was concentrated on one specific manufacturer. In addition, the main specifications of the fishery sea anchor are set and manufactured based on conventional experience without standards. In the field, there was no standardized drawing for fishery sea anchor and users had low awareness of the main specifications of fishery sea anchor. Therefore, this study suggested the following regarding the fishery sea anchor: standard terms for each part including Korean and English names and standard drawing of sea anchor. It is hoped that this study will contribute to research for the standardization of fishery sea anchor, which will increase in reliability and lead to increased interest in standardization in the fishery field.

Keywords

Acknowledgement

이 논문은 2021년 해양수산부 재원으로 해양수산과학기술진흥원의 지원을 받아 수행된 연구임(해양수산산업 기자재 표준화 기술개발).

References

  1. An HC. 2000. Development and hydrodynamic characteristics of sea anchor for squid jigging vessel. Doctoral dissertation, Ph. D. thesis, Pukyong National university, Korea, 1-86.
  2. Hyun YK, Kim JK, Kwon BG and An HC. 1998. The Relationship between resistance and shape of sea anchor used in squid jigging boats. Journal of the Korean Society of Fisheries and Ocean Technology 34, 359-365.
  3. Kang SY, Ryu W, Bae CW and Kim JK. 2019. Analysis and the standardization plan of the terms used by seafarers on small vessel. Journal of the Korean Society of Marine Environment and Safety 25, 867-873. https://doi.org/10.7837/kosomes.2019.25.7.867.
  4. Kim NG. 2022. A study on the standardization of fishery sea anchor. Department of Fishery Production, Graduate School of Global Fisheries, Pukyong National University, Korea, 1-48.
  5. MOF (Ministry of Oceans and Fisheries). 2021. Statistical yearbook of oceans and fisheries. 1-500.
  6. MOF (Ministry of Oceans and Fisheries). 2020. Current status of fishing boats. 1-2.
  7. Ro KD, Kwon BG and An HC. 1997. Fluid dynamic computation for sea anchor. Transactions of the Korean Society of Mechanical Engineers B 2, 463-468.
  8. Ro KD, Kwon BG, and An HC. 1998. Numerical analysis for flowfield of a circular arc type sea anchor by discrete vortex method. Transactions of the Korean Society of Mechanical Engineers B 22, 1041-1051. https://doi.org/10.22634/KSME-B.1998.22.8.1041.