Browse > Article
http://dx.doi.org/10.5345/JKIC.2008.8.1.083

A Study on the Improvement of Reinforcing Bar Detailing  

Park, U-Yeol (안동대학교 공과대학 건축공학과)
Kim, Baek-Jung (고려대학교 공과대학 건축.사회환경공학부)
Jung, Hyun-Ok (고려대학교 공과대학 건축학과)
Yun, Seok-Heon (경상대학교 건축학부)
Cho, Hun-Hee (고려대학교 공과대학 건축.사회환경공학부)
Kang, Kyung-In (고려대학교 공과대학 건축.사회환경공학부)
Publication Information
Journal of the Korea Institute of Building Construction / v.8, no.1, 2008 , pp. 83-90 More about this Journal
Abstract
The reinforcing steel process is composed of the development of placing drawing, cutting and bending, and the placement and fabrication of the reinforcement, and is participated in by reinforcement detailer, the fabricator and placer. Because the reinforcing steel process-from estimating and rebar detailing, to production, material tracking, billing, and general accounting-is conducted by many participant, reinforcement details based on building code and reinforcing bar detailing standards are essential. The process, however, holds some problems. Building code has been revised recently, and the utilization of placing drawings was proved to be low, and the reinforcement estimating in early stage of the process is below what is required for placement. Therefore, in this study, a survey was conducted to the reinforcement detailer, the fabricator and placer of domestic construction industry. According to the analysis of the survey, the reinforcement details on site was not standardized. The improvement in reinforcing steel detailing standards was sought by analyzing the results of the survey including reinforcement constructability.
Keywords
Rebar Work; Placing Drawing; Reinforcing Bar Details; Constructability;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 현대산업개발 구조설계팀, 2002철근콘크리트 배근 상세도, 현대산업개발, 2002. 8. 26
2 한국콘크리트학회, 콘크리트구조설계기준.해설, 기문당, 2008.
3 American Concrete Institute, ACI Detailing Manual -2004, 2004
4 김광희, 박우열, 강경인, 국내 건축물 철근공사 품질.원가 개선을 위한 시스템 개발에 관한 연구, 대한건축학회논문집(구조계), 18 (5), 2002, pp. 121-128   과학기술학회마을
5 金善國, 金文漢, 鐵筋 損率을 줄이기 위한 最適化 알고리즘 開發에 관한 硏究, 대한건축학회논문집, 7(9), 1991, pp.385-391
6 김용일 외 3인, 鐵筋物量算出 및 損率 最適化 시스템 開發 硏究, 대한건축학회논문집, 10(1), pp. 173-179
7 박우열, 김광희 강경인, 국내 철근공사 실태분석 및 개선방안에 관한 연구, 한국건축시공학회논문집, 4(3), 2004, pp.83-91   과학기술학회마을   DOI   ScienceOn
8 박우열, 건설공사 철근정보관리 개선방안에 관한 연구, 한국건축시공학회논문집, 5(4), 2005, pp.99-106   과학기술학회마을   DOI
9 박현용 외 3인, 가공철근 물량산출 및 배근시공상세도 작성시스템 개발, 한국건설관리학회 학술발표대회 논문집, 2007, pp.358- 363   과학기술학회마을
10 대한건축학회, Negative Prefab 표준화, 기문당, 2001.11.8
11 대한주택공사, 철근콘크리트조의 배근 시공도작성실무, 기문당, 2000
12 이성수 외 3인, 철근콘크리트조의 설계 전산화에 관한 연구, 대한건축학회논문집, 11(3), pp.129-136   과학기술학회마을
13 이재명, 유정호, 김창덕, 야적장 크기를 고려한 철근의 경제적 주문량(EOQ) 산정, 한국건설관리학회 학술발표대회 논문집, 2007, pp.549-552   과학기술학회마을
14 임칠순, 이규철, 철근의 적정량 산출에 관한 연구,한국건축시공학회 학술논문발표회 논문집, 1(1), 2001   과학기술학회마을
15 김선국, 김치경, 철근 콘크리트조의 구조설계-철근공사관리 자동화 연구, 대한건축학회논문집, 10(1), 1994, pp. 113-122
16 조훈희, 강경인, 국내 철근가공공사의 실태에 관한 연구: 자재손실을 중심으로, 대한건축학회논문집 학술발표대회논문집, 16(2), 1996, pp. 771-774
17 태연기계, 한국 철근가공의 현주소, 태연기계(주), 2001.
18 함치선 외 4인, CAD시스템을 이용한 공동주택 철근 시공 상세도 및 물량산출시스템 개발에 관한 연구, 대한건축학회논문집 구조계, 15(8), 1999. pp. 111-119   과학기술학회마을
19 김동진, 김종욱, 철근공사 공장가공 합리화 방안, 대한건축학회 학술발표논문집, 24(1), 2004, pp. 419-422
20 정도영 외 4인, 건설현장 철근작업 프로세스상의 적정 자재재고 관리방안에 관한 연구, 한국건설관리학회 학술발표대회 논문집, 2003, pp.702-708   과학기술학회마을
21 조훈희 외 5인, 철근공사의 공장가공 현황분석과 활성화 방안, 한국건설관리학회논문집, 8(1), 2007, pp. 57-64   과학기술학회마을