• 한국실내디자인학회논문집
• /
• 제22권1호
• /
• pp.97-104
• /
• 2013

This study aims at finding out the characteristics and influences of Libeskind's early drawing works through comparisons of each drawing. The importance of his experimental drawing works is not only their uniqueness but also relationship to creation and development of his architecture. Libeskind's musical and educational background had great impacts on forming his early drawings. A series of drawings including 'Micromegas', 'Chamberworks', and 'Theatrum Mundi' shows variety and experiments about reconstruction of three dimensional architectural fragments, abstractive line drawing and plane oriented painting. Libeskind himself cease to experiment drawing techniques but their characteristics still remain in his sketches, diagram and conceptual drawings. In spite of influences of undergraduate design studios, theoretical background of graduate studies, their experimental features are due to his continuous endeavor to make and develop his drawing skills and contents. As a result, his early drawings act as media and way to communicate and develop his concepts.

• 소성∙가공
• /
• 제5권2호
• /
• pp.130-137
• /
• 1996

The sheet formability can be improved by the optimum drawbeads installation because draw-beads can control the flow of the metal into the die cavity when the punch enters into the die opening, In this study the drawing characteristics for step drawbead are analyzed by 2-D rigid -plastic FEM and also are measured experimentally. In addition for the validity of FEM theoretical results are compared with the experimental results. Especially the draw bead restrain-ing forces and the strain distributions of drawn specimens are obtained in both FEM and experiment. Also the effects of the drawbead dimensions drawing angles and blank holding forces on the drawing characteristics are investigated.

• 소성∙가공
• /
• 제18권7호
• /
• pp.538-543
• /
• 2009

The cowl cross bar of an automobile is a frame component that is installed inside the cockpit module to provide a guide surface, to which functional components for electricity and air condition are attached. In the recent years, the geometries of cowl cross bars are getting more complex in order to meet the demands of a wide variety of embedded functional components and the reduced weight of frame parts with enhanced mechanical and noise/vibration characteristics. There for, welding processes between tubes with different diameters are widely conducted while the welded parts are experiencing various problems such as undermined appearance, low production efficiency and poor mechanical characteristics. Therefore, this paper seeks to develop an one-piece forming process which eliminate welding process for the cowl cross bar by applying the tube drawing process. However, it was predicted that a conventional tube drawing can not be applied directly to the current part since the area reduction ratio of the drawing process reaches 51.7% which exceeds the general limiting value. Therefore, in this study, a combined drawing process which adds a compressive force to a tensile force of the conventional drawing process was proposed and 2-stage drawing process was designed by using CAE analyses. In addition, drawing tryouts were carried out by using the manufactured combined drawing machine in order to verify the designed process.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 봄 학술발표회 논문집
• /
• pp.214-219
• /
• 1998

The characteristics of the Cotton/Polyester(C/P) blended slivers produced by drawing process have greatly influenced on the structure and properties of final yarns.$\^$1)/ Especially, since the unevenness of slivers is decreased greatly with passage of drawing, the optimum condition of drawing process is very important to improve the quality of yarns.(omitted)

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 춘계학술대회논문집
• /
• pp.170-177
• /
• 1995

The restraining characteristics for the single square drawbead are discussed. The drawbead restraining forces adn maximum strains by the various drawing angles are measured experimentally. During this procedure , the drawing angles are varied from 0$^{\circ}C$ to 60$^{\circ}C$. Also, the wide range of experimental data of the drawing forces and maximum strains for the various drawbead dimensions, dimensions, clearances and blank holding forces are preseted.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 추계학술대회논문집
• /
• pp.128-135
• /
• 1995

Theoretical and experimental drawing characteristics for the step drawbead are discussed. The drawbead restraining forces and strains by the varous drawing angles are measured experimentally. Also, during the blank holding process, the strain distributions of upper and lower skins of specimens are analysed by the 2-D rigid-plastic F.E.M And the drawbead restraining forces and strain distributions for the drawn specimens by the drawing length are obtained by experiment.

• 소성∙가공
• /
• 제8권4호
• /
• pp.340-346
• /
• 1999

Circular drawbead forming and drawing characteristics of CO2 laser welded SPC1 blanks are investigated by experiments and numerical analysis. During the drawbead forming process, the distributions of major strain on upper and lower skins of the specimens are measured. During the drawing process, the drawing forces and the strain distributions are investigated. For the numerical analysis. DYNA3D and SGTAS, a developed rigid-plastic finite-element computer program are used. Numerical results predicted the deformation characteristics well in comparison with experiments. It is concluded that the strains and restraining forces during the forming and the drawing processes show different patterns according to the combination of welded blanks.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 춘계학술대회논문집
• /
• pp.110-120
• /
• 1996

A crank-slider mechanism is driven by the rotating disk with are crank-pin guide to be applied to the deep drawing and cold forging presses. Load characteristics for different presses are summarized to see the basics of deep drawing of sheet metal and forging in terms of load-stroke relationship. Several types of conventional deep drawing presses are also shown to be compared with the ratating disk-types press. Kinematic performances by thearc guide driving mechanism are anlayzed in terms of load capaicty, stroke, and slide velocity characteristics, and they are compared with those by conventional driving , e.g. Niagara-typepress and so on. Kinematically better performances is shown by arc guide drive than those by conventional ones. The new driving mechanism is also proven to be one of the best for mass production press in terms of short cycle time. Possible applications of the arc guide press to deep drawing and cold forging work are in terms of kinematics and load capacity.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.201-202
• /
• 2006

To analyze the dynamic characteristics of the bundle drawing process, we employed a Random Phase Spectrum method to generate stochastic test signals that had a given autocorrelation function. And the spectra of the dynamics of the process outputs were obtained, based on the dynamic model of the bundle drawing process. Results showed that the RPS method was very effective to generate stochastic signals that had an exponential function form. The drawing process had the traits that there existed a special frequency range, incurring the process resonance.

• 한국표면공학회지
• /
• 제36권4호
• /
• pp.339-346
• /
• 2003

Stainless steel wire has been used in industry, dental and medical parts. Especially, it has been used widely for the dental orthodontic materials. The orthodontic wire requires good mechanical properties, such as elastic strength, combined with a high resistance to corrosion. To increase elastic strength and good corrosion resistance, drawing methods(one-step and two-step drawing) have been used and the electrochemical characteristics of drawed wire have been researched using potentiodynamic method in 0.9％NaCl and field emission scanning electron microscope. The one-step drawed wire showed the formation of rough surface. The hardness and tensile strength of two-step drawed wire increased. For the case of two-step drawed wire, the corrosion resistance and pitting potential increased compared with one-step drawed wire due to the drawing induced small surface roughness, such as scratch. The passivation and active current density decreased as the reduction in area for drawing increased.