• 대한기계학회논문집A
• /
• 제30권7호
• /
• pp.849-856
• /
• 2006

In this paper, fabric composite draping on hemisphere moulds were studied to find out the deformation behaviour of micro-tow structures of fabrics during draping and thermoforming. Aluminium and PVC foams were used to fabricate the hemisphere moulds for draping tests. In order to observe the local tow deformation pattern during the draping several specimens for microscopic observation were sectioned from the draped hemisphere structures. The effect of forming condition and mould properties on tow deformation was investigated by the microscopic observation of the tow parameters such as crimp angle. Normalization scheme was performed to compare tow parameter variations with different forming conditions. Stress-strain .elations of two different PVC foams (HT70 and HT110) were tested to investigate the effect of foam property on the micro-tow deformation during forming.

• 복식문화연구
• /
• 제29권3호
• /
• pp.346-360
• /
• 2021

Universities have recently introduced problem-based learning (PBL) to various subjects to enhance problem-solving skills (including self-directed learning and small-group learning) required in industry. The PBL module was applied to the personal production process in a draping class. A study was based on a questionnaire after conducting two PBL modules with a group of students. Each PBL module included 'design analysis', 'presentation of flat sketch and draping plan', 'discussion of the plan', 'evaluation of the draping result and correcting the problem', and 'final evaluation of the completed project'. Results showed that satisfaction with the PBL method and its activities was higher than satisfaction with existing teaching methods. In particular, among the various components, the 'design analysis' and 'the presentation step of flat sketch and draping plan' stages were more helpful to students compared to small-group discussion. Moreover, the effects of PBL were observed through student reflection essays, in which students suggested that PBL was very effective in enhancing problem-solving through self-directed and small-group learning. Despite the overall satisfaction with PBL, students expressed some minor difficulties associated with awkwardness with a novel learning method, lack of diverse perspectives among each group, and poor communication skills. Therefore, the study shows that PBL is highly likely to be useful to students when they are solving pattern drafting problems and making samples through self-directed learning and small-group learning.

• Design & Manufacturing
• /
• 제13권1호
• /
• pp.25-30
• /
• 2019

This paper presents the design strategy for the optimal RTM molds of Carbon Fiber Reinforced Plastic (CFRP) by carbon fiber draping and resin flow simulation. First, the mold shape and molding condition were determined considering the undercut and die face of the product in the draping simulation, which made the preliminary shape of the product by compressing the carbon fiber. After that, the diffusion behavior during the injection of resin in the mold was predicted by the resin flow simulation. Finally, the optimal mold shape was designed by selecting the locations of resin injection port and vent based on total results of simulations. In this paper, the mold of automotive side mirror case was selected as the representative product. Also, the actual mold was manufactured based on the simulation design to confirm the practicality of it. This study is expected to contribute to the industry as a technology to improve the reliability and productivity of CFRP producted by RTM process.

• Composites Research
• /
• 제24권3호
• /
• pp.6-11
• /
• 2011

본 논문은 복잡한 형상으로 드레이핑 성행된 직물 복합재료 구조의 국부적 물성 변화 및 재료거동 예측을 위한 방법을 제시하였다. 제안된 방법을 적용하기 위해 대퇴골 골 간단 부 골절치료용 고정판을 대상으로 선정하였다. 드레이핑 공정 종 발생하는 재료의 거시적/미시적 변형에 의한 국부적 재료물성 변화를 다양한 실험을 통해 검증하고, 그 결과를 복잡한 형상을 가지는 고정판의 정적/피로 거동 예측에 활용하였다. 본 논문은 복잡한 형상을 가지는 복합재료 구조물의 설계 및 성능평가에 유용한 정보와 해석방법을 제시할 것으로 기대된다.

• Advances in aircraft and spacecraft science
• /
• 제2권1호
• /
• pp.1-16
• /
• 2015

In this paper, geometrical and mechanical approaches are proposed for the simulation of the draping of woven fabric onto complex parts. The geometrical discrete approach allows to define the ply shapes and fibres orientation in order to optimize the composite structural properties and the continuum meso-structural mechanical approach allows to take into account the mechanical properties of fibres and resin and the various dominating mode of deformation of woven fabrics during the forming process. Some numerical simulations of forming process are proposed and compared with the experimental results in order to demonstrate the efficiency of our approaches.

• 한국의류산업학회지
• /
• 제6권3호
• /
• pp.399-403
• /
• 2004

대학에서 의류학과 교육은 그 목적에 따라 다양하나 의복구성은 의복제작과정을 이해하는데 필요한 것으로 의복디자인분야 부터 품질관리에 이르기까지 기본과목으로 되어있다. 의복제작은 인체의 이해에 따른 기본원형의 설계로 시작된다. 기본원형은 활용이 다양하여 모든 종목의 의복 패턴 제작이 가능해야 한다. 또한 각 인체 치수에 맞는 사이즈를 등급화하여 초보자라도 누구나 활용할 수 있는 기본원형을 설계하는 것이 필요하다. 따라서 본 연구는 20대 초반의 대학생을 대상으로 입체재단 방법에 의한 기본원형을 제작하여 등급별로 표준화된 치수를 산출하고 연구된 평면재단 방법에 의한 길의 기본원형을 비교 검정하여 적합성을 비교하였다. 석고법에 의하여 제작된 인체모형에서 드레이핑된 기본원형과 연구된 평면재단 방법에 의한 기본원형을 비교 검정한 결과 5단계로 치수를 등급화 하였다. 착장평가 결과 다양한 체형에 만족힌 결과를 얻어 의복구성을 시작하는 초보자들에게 활용하여 교육할 수 있으리라 기대한다.

• 패션비즈니스
• /
• 제22권4호
• /
• pp.30-46
• /
• 2018

The purpose of the study was to suggest certain measurements of the skirt block pattern drafting process for the Korean female fashion models, with the aim to improve its fit. For this purpose, the study carried out an analysis of the lower body features of a dress form developed for the study. This form was representative of Korean female fashion models' body features. The study performed a cross-sectional analysis at waist and hip levels and measured the angles from the frontal and lateral silhouettes of the dress forms. The comparisons of the skirt block patterns developed through draping by the use of 2 types of the dress forms developed and existed and through drafting according to the current patternmaking method have led to noticeable findings in terms of implementation of the skirt block drafting process for the Korean female fashion models. The results of the study are as follows: (1) the vertical lengths between the levels at the front waist point and the side waist point in the patterns are 0.7cm; (2) the vertical length between the levels at the front waist point and the back waist point in the back panel is 0.7cm; (3) the horizontal lengths between the perpendicular line from the side hip point and the side waist point in patterns are within a range of 2.0 to 2.2cm; (4) the horizontal length between the original and the adjusted back waist points moved into the waist line, in a range of 0.0 to 1.0cm, differs whether the center back line would be folded or sewn.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.20-23
• /
• 2002

In this paper, various tow parameters such as equivalent tow thickness, amplitude of longitudinal tow and tow intervals were investigated and compared with each other by using microscopic observation to find out the exact deformation patterns between both directions of the fabric structure (Longitudinal and Transverse Directions). Specimens for the observation were taken from draped helmet which is made of fabric composite (Five Harness Satin Weave). From the observation results, it was found that there are different deformation pattern between tow directions and effect of geometric condition on the deformation of the fabric materials during draping process was verified.

• 복식
• /
• 제66권4호
• /
• pp.61-76
• /
• 2016

The importance of environment has come into focus recently, and this has led to increased attention on zero waste fashion design as a method to minimize waste from the production stage of fashion goods. The purpose of this study was to analyze the development method types and the characteristics of zero waste fashion design in order to study the eco-friendly meanings of zero waste fashion design, as well as its meaning as creative design development methods. Through the case analysis of recent designs, the design types of zero waste fashion design were largely classified into cut and sew, folding, draping, and non-woven types, and they were classified again according to the characteristics of production process. According to the result of analyzing fashion design development methods of zero waste fashion designs based on the process of completing design, they were classified into pattern making, computer programming, draping, assembling of the unit, and non-woven moulding methods, and the aspect of combined use rather than utilization of one method appeared. Formative characteristics of zero waste fashion design included decorative beauty, formative beauty, and transformable beauty and its design characteristics were fortuity and unexpected properties, breaking stereotypes, structural flexibility and futuristic innovation.

• Human Ecology Research
• /
• 제61권1호
• /
• pp.53-71
• /
• 2023

Dressmaking is a high value-added sector of the fashion industry in which the individuality and skills of designers play a prominent role. The appropriate use of the draping and the flat pattern techniques in the dressmaking process also play an important part in perfecting the finished product. The purpose of this study was to improve the understanding of dress design and identify a pattern production technique to enhence efficiency in each of the three elements of the dress manufactureing process. For this purpose, analysis of the design of 1,389 wedding dress photographs published in Wedding 21, Korea's leading wedding magazine, during 2019 and 2020 was conducted. This analysis identified 15 bodice designs and 11 sleeve designs based on neckline and eight skirts based on silhouette which were ranked by frequency distribution. Patterns for the design of samples were then developed according to the highest combined frequency distribution of these three elements. Eight samples were finally produced to test the the efficiency of the patternmaking techniques empolyed and the selected designs. The findings from this study have practical applications, notably in improving the efficiency of pattern production techniques that will facilitate further growth in the dressmaking industry.