• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 추계학술대회 논문집(Proceeding of the KOSME 2001 Autumn Annual Meeting)
• /
• pp.130-134
• /
• 2001

In the re-entry control system, errors apt to induce because the time derivative of drag acceleration is analytically estimated. Still more, the difficulty of estimation of the exact drag coefficient in hypersonic velocity and the nun-reality of the scale height cause a steady-state drag error. This paper proposes the additional method of the disturbance observer. This reduces the steady-state drag error according to the following series. First, this method estimates a error in drag acceleration time derivative by the analytic calculation and then creates the new drag acceleration time derivative using the estimated error. The performance of the re-entry control system is verified about 32 reference trajectories.

• 한국군사과학기술학회지
• /
• 제2권2호
• /
• pp.70-82
• /
• 1999

During the aircraft conceptual design stage, rapid aerodynamic analyses over various configurations are required. Hence, empirical and analytical methods play important roles in predicting the aero-dynamic characteristics. In this study, total drag estimation method based on empirical and analytical approaches is developed. By comparing with the results of the wind tunnel experiment and existing prediction methods, it is demonstrated that the developed method is accurate and useful in predicting total drag for the whole Mach number range.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.965-980
• /
• 2014

This paper presents a new estimation method of full scale propulsive performance for the pulling type podded propeller. In order to estimate the drag of pod housing, a drag velocity ratio, which includes the effects of podded propeller loading and Reynolds number, is presented and evaluated through the comparison of model test and numerical analysis. By separating the thrust of propeller blade and the drag of pod housing, extrapolation method of pod housing drag to full scale is deduced, and correction method of propeller blade thrust and torque to full scale is presented. This study utilized the drag coefficient ratio of the pod housing as a measure for expanding it to full scale, but in order to increase the accuracy of performance evaluation, additional study is necessary on the method for the full scale expansion via separating the drag of pod body, strut and fin which consist the pod housing.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.817-832
• /
• 2021

In this paper, a simple practical method to estimate the drag of Super-Cavitating Underwater Vehicles (SCUV) is proposed that can obtain the drag with only principal dimensions in an initial design stage. SCUV is divided into cavitator, forebody, afterbody, base, and control fin and the drag of each part is estimated. The formulas for the drag coefficient are proposed for the disk and cone type cavitators and wedges used as control fins. The formulas are a function of cavitation number, cone or wedge angle, and Reynolds number. This method can confirm the drag characteristics of SCUV that the drag hump appears according to the coverage of the body by the cavity and the cavitator drag remains only when the entire body is covered by cavity. Applying this method to SCUV of various shapes, it is confirmed that the effects of cavitating and non-cavitating conditions, cavitator and body shape, and speed could be found.

• Journal of Astronomy and Space Sciences
• /
• 제20권1호
• /
• pp.11-20
• /
• 2003

A method for estimating the NORAD SGP4 atmospheric drag term from minimum osculating orbit states, i.e., two osculating orbits, is developed. The first osculating orbit state is converted into the NORAD TLE-type mean orbit state by iterative procedure. Then the converted TLE is propagated to the second orbit state using the SGP4 model with the incremental SGP4 drag term. The iterative orbit propagation procedure is finished when the difference of the two osculating semi-major axes between the propagated orbit and the given second orbit is minimized. In order to minimize the effect of the short-term variations of the osculating semi-major axis, the osculating argument of latitude of the second orbit is propagated to the same argument of latitude of the first orbit. The method is applied to the estimation of the NORAD-type TLE for the KOMPSAT-1 spacecraft. The SGP4 drag terms are estimated from both NORAD SGP4 orbit propagation and the numerical orbit propagation results. Variations of the estimated drag terms are analyzed for the KOMPSAT-1 satellite orbit determination results.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2000년도 제14회 학술강연논문집
• /
• pp.18-18
• /
• 2000

In the high lift devices specifications for surface smoothness requirements, as manufacturing tolerances, arise out of aerodynamic consideration to minimize drag. True optimization of tolerances is a multi-disciplinary problem involving fluid mechanics, device performance, manufacturing philosophy and life cycle costing. One of the reasons for degradation of wetted surface is discrete roughness as a consequence of manufacturing defects, collectively termed as one of the excrescences effect. Usually, excrescence drag arising out of discrete roughness is of considerable lower order of magnitude as compared to the total drag of the flight bodies. Nor was there adequate predicting tool to account for the extent of drag degradation. Estimation of excrescence drag remained as a state-of-the art based on experimental results.

• 한국해안·해양공학회논문집
• /
• 제21권1호
• /
• pp.45-53
• /
• 2009

RNG $k-{\varepsilon}$ 난류모형이 포함된 3차원 동수역학 수치모형(FLOW-$3D^{(R)}$)을 사용하여 수조 수치실험을 통한 항력계수 산정 가능성을 검토하였다. 물리적 실험으로 항력계수가 알려져 있는 말뚝구조물에 대하여, 사각형 말뚝구조물의 수치해에 의한 항력계수값이 $1.34{\sim}1.52$로 물리적 실험값인 $1.3{\sim}1.5$의 범위와 매우 유사한 결과를 보였다. 원형 말뚝구조물은 0.5$0.75{\sim}0.78$ 정도로서 물리적 실험치와 비교적 잘 일치하였다. 그리고 항력계수값이 알려지지 않은 열을 이룬 말뚝구조물의 경우 항력계수값은 구조물 간의 간섭으로 단일 구조물에 비해 항력계수가 크게 나타났으며, 각 구조물간의 거리비가 작아짐에 따라 구조물이 받는 항력계수값은 증가하는 양상을 보였다.

• 한국항공우주학회지
• /
• 제30권1호
• /
• pp.75-81
• /
• 2002

재진입 제어계에서는 항력가속도의 시간미분을 해석적으로 추정하므로 오차가 발생되기 쉽다. 더구나, 극초음속 영역에서의 정확한 항력계수 추정의 어려움과 스케일 고도의 비현실성도 정상상태오차의 원인이 된다. 우주왕복선의 경우, 제어계에 항력가속도 오차의 적분항을 첨가함으로서 정상상태 오차를 줄이는 방법을 취하였지만 페루프 시스템에 다극점을 갖게 하여 현대적인 제어기 합성에 어려움을 가져다 준다. 그러므로, 본 논문에서는 해석적 계산에 의해서 항력가속도 시간미분에 포함된 오차를 추정하고, 그 추정오차를 이용해 항력가속도 시간미분을 보정함으로써 정상상태 오차를 줄이는 방법인 외란 관측기의 설계를 제안하고자 한다. 결과로는 32개의 기준궤적을 대상으로 대기권 재진입 시스템의 성능을 검증해 본다.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제5권1호
• /
• pp.29-39
• /
• 2002

A general investifation into the physical mechanism that is respinsible for drag above the sea surface has been undertaken. On the basis of a ID model of the Wave Boundary Layer(WBL), under a 2D wave field, a parameterization technique for estimation of the drag and mean characteristics of WBL is described. Special attention is paid to estimation of the simplifying assumption of the theory.

• 한국농공학회지
• /
• 제37권3_4호
• /
• pp.82-89
• /
• 1995

The efforts of formulation have been reviewed and the results of existing laboratory experiments are investigated in order to describe the contracted flow which occurs at the final closure of sea dike construction. The regional characteristics of contracted flow is analyzed by checking the drawdown curve, and Chezy's mean velocity equation is employed to estimate the discharge rate at the closure. Weir-type discharge equations are reviewed, which are derived from Bernoulli equation, and the problems of the equations are discussed. Chezy's mean velocity equation is considered to be widely and generally applicable, and the empirical factor introduced in Chezy's equation is named 'form drag factor' since it is primarily dependent on the form drag caused by the contraction of discharge area. Laboratory experiments were conducted mainly in order to investigate the variation of form drag factor against various parameters, and an empirical equation is developed for the estimation of form drag factor.