• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.292-298
• /
• 2010

Recently, with the beginning of the commercial operation of high-speed railway, there have been a number of changes in track structure fields. Also, it is expected that the development and introduction of new technology will be increased afterwards. However, it accompanies a lot of risk to install new track structures of which performance and safety are not verified on permanent ways with high traffic density. Therefore, to minimize the risk and enhance the adoption of new technology, it is required to develop a systemic verification system for track structure. To do this, in this paper, main contents of a draft of guidelines for track structure verification, and main issues in debate such as criteria and method for verification, test conditions and test periods are discussed. Also, a process to choose a most appropriate one for a specific project out of proven track structures by the above verification system, the selection process by the technical investigation committee and the VE process to analyze the economical and maintenance aspects based on LCC concept in Korea Rail Network Authority is introduced.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.409-414
• /
• 2003

In the beginning of the 21s1 century, the world has been making rapid progress and changed all over the areas. Like the rest, as all domiciliary circumstances for a local development have changed, the continuous development considered environmental view has been accounted as much compared with the high growth-oriented development based on the efficiency so far. As the volume of traffic in urban community increases, the environmental load enlarges inevitably. Particularly, the excess and deficiency problems for all sorts of traffic facilities, like the shortage of parking lots continue to happen in proportion to the increase in traffic. For a design to solve these problems, introduction of the Geographic Information System; GIS applied widely over various fields become necessary. In this research, the supply-demand situation in urban areas is observed. The application of GIS for the purpose of the improvement of parking lot management technique to control effectively facilities related to parking lot in the city brings promoting the efficiency of business data inquiry, data management data correction and so on through graphic and non-graphic database for every kind of draft data, record and register data. The graphic users interface to support effective decision-making is applied for the improvement of work in this study. This research also suggests the way to utilize common database considered linkage with sub-systems related existing urban information system by developing the parking lot management system.

• Journal of Biosystems Engineering
• /
• v.14 no.4
• /
• pp.221-228
• /
• 1989

A data acquisition system was designed to measure the forces on a rolling coulter in three coordinated directions, angular velocity of the coulter and travel speed of a soil bin. The data acquisition system consisted of a dynamometer, speed transducers, a signal conditioner, an inter-face board, an Aim-65 microcomputer and a digital data recorder. Strain gages were attached on the surface of the dynamometer and connected to form three Wheatstone bridges, which measure the draft force, the vertical force and the side force on the coulter. An interaction among three dimensional forces was found during the calibration. A matrix procedure was used to correct the forces for this interaction. Rotary shaft encoders were mounted on the coulter and on the soil bin drive to measure the angular velocity of the coulter and the travel speed of the soil bin. The angular velocity and the travel speed were computed by counting the number of pulse signals from the rotary shaft encoders every 0.2 second. The digital signals from the rotary shaft encoders were connected to counters and the analog signals from the dynamometer, after passing through the signal conditioner, were connected to the A/D converter. The microcomputer programs, written in assembly language, were developed to read signals from the transducers, convert them to actual unit, display them upon request and record them on a sigital tape every 0.2 second.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.1
• /
• pp.83-90
• /
• 2007

Apartment balcony has been indiscreetly remodeled since the government permitted remodeling on January 2006. But remodeled balcony has a few problems such as increase of heating energy, surface condensation and cold draft. The reason of thermal problem is mainly caused by the window system in a extended balcony. The purpose of this study is to analyze heating and cooling energy and propose the efficient window types for the extended balcony area of a apartment building. 4 types of window system which have fairly high U value in Korea are investigated as follows ; double clear glass, double low-e glass, triple clear glass and triple low-e glass. Comparing double clear 91ass with double low-e glass, triple clear glass and triple low-e glass, simulation results show that 10%, 7% and 15% saving of total primary energy can be expected.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.2
• /
• pp.177-185
• /
• 2012

Corrosion currents flow through the seawater due to the different electrochemical potential between a hull and a propeller under the draft line of ship. Additionally, in order to protect the hull and other sensitive anodic parts of the ship from corrosion, the corrosion protection system, called impressed current cathodic protection(ICCP) equipment has been installed in most naval ships. Those currents could be harmful to the electromagnetic silencing of the naval ship because sea mines are triggered by even a feeble field value. In this paper, we described electric and corrosion related magnetic fields by ship's galvanic corrosion and a corrosion protection system, and prediction results of electric and corrosion related magnetic fields at any depth for the model ship.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.5
• /
• pp.43-50
• /
• 2013

In the present investigation, the hydrodynamic characteristics of a vertically floating hollow cylinder in regular waves have been studied. The potential theory for solving the diffraction and radiation problem was employed by assuming that the heave response motion was linear. By using the matched eigenfunction expansion method, the characteristics of the exciting forces, hydrodynamic coefficients, and heave motion responses were investigated with various system parameters such as the radius and draft of a hollow cylinder. In the present analytical model, two resonances are identified: the system resonance of a hollow cylinder and the piston-mode resonance in the confined inner fluid region. The piston resonance mode is especially important in the motion response of a hollow circular cylinder. In many cases, the heave response at the piston resonance mode is large, and its resonant frequency can be predicted using the empirical formula of Fukuda (1977). The present design tool can be applied to analyze the motion response of a spar offshore structure with a moon pool.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.953-958
• /
• 2006

Perimeter zone has been reinforced by active systems, such as fan-coil units, because it causes an increase in heating and cooling loads, dew condensation in winter, or discomfort with cold-draft to residents in buildings, through poor insulation by light-weighed skin due to progressing multi-storied buildings and skyscrapers. However, because these active systems raise Its capacity so that fossil fuel is used as much as they are added, and ultimately, greenhouse effect is urged, we proposed BIPV system functioned as solar collector which can substitute active system. As an early stage, heat balance equation in steady-state by Fortran was used not only for pre-heating effect and electric power capacity during the day in winter, but also for electric power capacity during day in slimmer and sky radiation effect during night in summer. Especially, we should have considered shading on PV, since even a little bit of it makes the efficiency too low for the PV to work. Still, when the flux of pre-heated air was increased to make air-barrier, its temperature was not enough to make it because the speed of heat exchange was too fast to warm up the air, thus the capacity to meet the condition was evaluated, and electric power from PV was made used for it.

• Human Ecology Research
• /
• v.62 no.2
• /
• pp.197-216
• /
• 2024

The dual aims of this study were i) to explore the effectiveness of an assessment method that can measure the competencies learned through high school home economics and ii) develop a competency-based assessment framework for high school home economics, including components of competency-based assessment, item development system, and other elements. The study involved the following stages: literature analysis, draft development, concretization, validity verification, and final version. Based on the results of the literature analysis and expert deliberation, a competency-based assessment framework for high school home economics was developed which comprised three dimensions: 'core idea' × 'process' × 'context and value'. Based on this, an item analysis table was presented to systematize various activities for the competency-based assessment of high school home economics, following which a holistic rubric suitable for competency assessment tasks was proposed by referring to the newly developed 'process' dimension assessment criteria. This study is significant in that it is the first to propose a competency-based assessment framework that systematically presents a variety of assessment activities. These will facilitate the development of assessment standards and tools that teachers can refer to or trust in the changing school environment due to the introduction of the standard-based assessment system based on a high school credit system, and the guarantee of a minimum achievement level.

• Journal of the Korean Institute of Gas
• /
• v.7 no.1 s.18
• /
• pp.24-27
• /
• 2003

In this paper it was investigated 15 heaters of CDU plant heater, NCC plant heater, CO plant heater, Aromatic plant heater and so on while running in our country. It was also analysed the standard of operation procedure, the action in alarm, the interlock system, the operating situation of the interlock by-pass and major accident about the heater and so on. This paper presents the installation of the on-line monitoring, the additional installation of the local pressure gauge and temperature gauge, the check in starting operation,'the management of the interlock by-pass, the change of manufacturer causing the disorder of instrument sensor, the management method of DCS alarm for methods of the interlock prevention and facilities improvement. It was few information about the heater interlock in the inside and outside of the country We mainly have studied with reflecting the opinion of the operator and manager on site, the sheet of process trouble and operation procedure and so on. we think that the accident relating to the interlock will significantly reduce if the companies apply the conclusion of this study(i.e. methods of the interlock prevention and facilities improvement).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.577-580
• /
• 2006

The rapidly growth of Internet is main factor that activates the Digital Contents market. However imprudent Digital Contents market could be shrunk by imprudent illegal copy and delivery. MPEG(Moving Picture Experts Group) proposed MPEG-21 Multimedia frameworks in order to solve these problem. IPMP is parts of MPEG-21 Multimedia Frameworks, when Digital Contents goes through production delivery consumption, which defines standard to keep the Digital Contents in safety. Currently IPMP defined by FCD(Final Committee Draft) level. Therefore development of system which applied to latest standard to protect and manage the Digital Contents is required. and the system consists of fourth organizations which means Metadata Production server, Tool server, License server, Consumption server. In this Paper, we made production server to parse REL(Rights Expression Language) document that has right information for content from license server, and create metadata based on MPEG-21 IPMP about the content that applied to watermark. then, after it do remuxing, transmit the protected data to consumption server.